zł639.37 tax excl.
The industrial cellular router provides LTE Cat 4 connectivity, 2.4 GHz Wi-Fi, and support for both a physical SIM card and eSIM. WAN failover, load balancing, and eSIM Bootstrap support network redundancy and remote operator profile deployment in industrial and IoT applications. Teltonika RUT281
Teltonika RUT281 uses a Telit LTE Cat 4 modem designed for operation across multiple regional cellular networks. The router supports a physical SIM card and eSIM in compatible variants, while eSIM Bootstrap allows a temporary profile to be used for downloading the required operator profile. The Wi-Fi interface supports IEEE 802.11b/g/n standards and can operate as an access point or wireless client.
WAN failover enables automatic switching to a backup connection if the primary link becomes unavailable, while load balancing can distribute traffic across available WAN interfaces. The aluminium enclosure measures 83 × 25 × 74 mm and supports installation in space-constrained industrial systems. eSIM profiles can also be managed remotely through Teltonika RMS.
Data sheet
Roof-mount LTE MIMO antenna designed for use with compatible Teltonika Networks routers and devices. It supports frequency ranges of 698-960 MHz and 1710-2690 MHz, while two 3 m RG174 cables are terminated with SMA Male connectors. The housing has an IP65 ingress protection rating, excluding the cable outlet, and is UV resistant. Teltonika PR1KCL25
WiFi rod antenna designed for routers, access points and networking devices operating in the 2.4GHz band. Supports frequencies of 2400-2483MHz, providing 5dBi antenna gain, vertical polarization and 50Ω impedance. Equipped with an RP-SMA male connector and a hinged design allowing 90° positioning. Overall length of 195mm and IP33 protection rating. Teltonika PR1URF51
r cellular routers and modems. Supports frequency ranges of 698-960MHz and 1710-2690MHz, providing 4dBi antenna gain, vertical polarization and 50Ω impedance. Equipped with an SMA male connector and a hinged design allowing adjustable positioning. The antenna measures 197mm in length and features an IP33 protection rating. Teltonika PR1US440
Adhesive LTE antenna designed for use with cellular routers and modems. Supports frequency ranges of 824-960MHz and 1710-2170MHz, providing 2dBi antenna gain and 50Ω impedance. Equipped with a 3m RG174 cable terminated with an SMA male connector. IP50 protection rating and adhesive mounting. Teltonika PR1AS420
Compact LTE rod antenna with a straight SMA male connector, designed for cellular routers and modems. Operates in the 700-2700MHz frequency range, providing 5dBi gain, vertical polarization and 50Ω impedance. The antenna measures 54mm in length. Teltonika PR1CS450
5-in-1 roof antenna combining two LTE MIMO antennas, two WiFi MIMO antennas and a GNSS antenna. Supports LTE frequency bands of 698–960MHz and 1710–2690MHz, WiFi 2.4GHz and 5GHz bands, and GNSS frequencies of 1575.42–1610MHz. Equipped with five 3m cables with SMA and RP-SMA connectors. IP65-rated housing with screw mounting. Teltonika PR1KCO28
The industrial cellular router provides 4G LTE Cat 6 connectivity, four Gigabit Ethernet ports, and Dual SIM support. Failover functions, GNSS, USB, and industrial communication protocols support deployment in IoT, automation, and network installations requiring redundant cellular connectivity. Teltonika RUTX09
The industrial cellular router provides 4G LTE Cat 6 connectivity, four Gigabit Ethernet ports, dual-band Wi-Fi 5, and Bluetooth Low Energy. Dual SIM, GNSS, automatic failover, and support for up to 128 VLANs enable deployment in industrial, IoT, and redundant network applications. Teltonika RUTX11
The industrial cellular router uses two independent LTE Cat 6 modems, allowing two simultaneous cellular connections. Load balancing, Dual SIM, five Gigabit Ethernet ports, Wi-Fi 5, Bluetooth Low Energy, and GNSS support applications requiring redundant and highly available network connectivity. Teltonika RUTX12
No product available!
The industrial cellular router provides LTE-A Cat 12 connectivity, five Gigabit Ethernet ports, and dual-band Wi-Fi 5. Dual SIM, automatic failover, Bluetooth Low Energy, and support for up to 128 VLANs enable deployment in industrial networks, IoT systems, and applications requiring high-speed and redundant connectivity. Teltonika RUTX14
The industrial cellular router provides 5G SA/NSA connectivity with backward compatibility for 4G LTE Cat 20 and 3G networks. Dual SIM, five Gigabit Ethernet ports, dual-band Wi-Fi, GNSS, and automatic failover support industrial, IoT, and redundant network applications. Teltonika RUTX50
No product available!
The industrial rack-mounted router provides LTE Cat 6 connectivity, Gigabit Ethernet, SFP, and dual-band Wi-Fi 5. Dual SIM, redundant power inputs, WAN failover, USB, and a dedicated console port support network installations requiring high availability and integration with fibre infrastructure. Teltonika RUTXR1
No product available!
Industrial network gateway for IoT and automation systems; 4G LTE Cat 4 with speeds up to 150Mbps; 3G and 2G; Gigabit Ethernet port; support for Modbus TCP, DNP3, OPC UA and MQTT; digital input and output; 9-30VDC power supply; RutOS operating system. Teltonika TRB140
Industrial network gateway for remote device monitoring and control; 4G LTE Cat 1 with speeds up to 10Mbps; 3G and 2G; extensive set of digital and analog inputs and outputs; 2 relay outputs; 1-Wire interface; support for Modbus TCP, DNP3, OPC UA and MQTT; 9-30VDC power supply; RutOS operating system. Teltonika TRB141
Industrial network gateway for remote communication with serial devices; 4G LTE Cat 1 with speeds up to 10Mbps; 3G and 2G; RS232 interface with DB9 connector; support for Modbus TCP/RTU, DNP3, DLMS/COSEM and MQTT; 2 configurable inputs/outputs; 9-30VDC power supply; RutOS operating system. Teltonika TRB142
Industrial network gateway for telemetry and utility monitoring; 4G LTE Cat 4 with speeds up to 150Mbps; M-Bus interface for up to 250 devices; power supply for up to 6 M-Bus devices; Gigabit Ethernet; digital input and output; support for Modbus TCP, DNP3, OPC UA and MQTT; 12-30VDC power supply; RutOS operating system. Teltonika TRB143
Industrial network gateway for remote communication with serial devices; 4G LTE Cat 1 with speeds up to 10Mbps; 3G and 2G; 2-wire or 4-wire RS485 interface; support for Modbus TCP/RTU, DNP3, BACnet, DLMS/COSEM and MQTT; 2 configurable inputs/outputs; 9-30VDC power supply; RutOS operating system. Teltonika TRB145
Industrial IoT gateway for connecting automation, telemetry and M2M systems to cellular networks; 4G LTE Cat 6 with download speeds up to 300 Mbps and upload speeds up to 50 Mbps; carrier aggregation; 1 x Gigabit Ethernet; USB Type-C for power and network data; Mini SIM; 2 x SMA; configurable digital I/O; Modbus TCP, MQTT, DNP3, DLMS/COSEM and BACnet/IP; VPN support; RutOS; 9-30 VDC or 5 VDC via USB Type-C; passive PoE; aluminium enclosure; IP30; operating temperature from -40°C to 75°C. Teltonika TRB160
Industrial IoT gateway for communication over LTE 450 networks and integration of automation and technical infrastructure devices with IP networks; 4G LTE Cat 1 up to 10 Mbps download and 5 Mbps upload; 450 MHz band; 2G support; Dual SIM; 1 x Ethernet 10/100 Mbps; RS232; RS485; 3 x configurable digital I/O; 1 x analog input 0-30 V; Modbus TCP/RTU; BACnet/IP and BACnet over RS485; OPC UA; MQTT; DNP3; DLMS/COSEM; VPN; 9-57 VDC power supply; aluminium housing; IP30; operating temperature from -40°C to 75°C. Teltonika TRB236 Cat1 LTE450
Industrial IoT gateway for communication over LTE 450 networks and integration of automation and technical infrastructure equipment with IP networks; 4G LTE Cat 4 up to 150 Mbps download and 50 Mbps upload; 450 MHz band; 3G support; Dual SIM; 1 x Ethernet 10/100 Mbps; RS232; RS485; 3 x configurable digital I/O; 1 x analog input 0-30 V; Modbus TCP/RTU; BACnet; OPC UA; MQTT; DNP3; DLMS/COSEM; VPN; 9-57 VDC power supply; aluminium housing; IP30; operating temperature from -40°C to 75°C. Teltonika TRB236 Cat4 LTE450
Industrial network gateway for remote monitoring, M2M communication and IoT systems; 4G LTE Cat 4 with speeds up to 150 Mbps; 3G and 2G; Dual SIM with automatic failover; 10/100 Mbps Ethernet port; RS232 and RS485 interfaces; digital inputs and outputs and analog input; GNSS; support for Modbus, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; 9-30 VDC power supply; RutOS operating system. Teltonika TRB246
Industrial IoT gateway for cellular communication and integration of automation equipment with IP networks and cloud systems; 4G LTE Cat 1 bis up to 10 Mbps download and 5 Mbps upload; Dual SIM; 1 x Ethernet 10/100 Mbps; RS232; RS485; 3 x digital input; 3 x digital output; GNSS with GPS, GLONASS, BeiDou, Galileo and QZSS; Modbus TCP/RTU; BACnet; OPC UA; DNP3; DLMS/COSEM; MQTT; extensive VPN support; 9-30 VDC power supply; aluminium housing; IP30; operating temperature from -40°C to 75°C. Teltonika TRB247
The industrial cellular router provides LTE Cat 4 connectivity, 2.4 GHz Wi-Fi, and support for both a physical SIM card and eSIM. WAN failover, load balancing, and eSIM Bootstrap support network redundancy and remote operator profile deployment in industrial and IoT applications. Teltonika RUT281