Main view
search
  • Main view
  • Angled view
  • Angled view
  • Side view
  • Side view
ID: 1208016
4779051840830
zł969.71
Tax included

zł788.38 tax excl.

Industrial cellular router for integrating automation equipment, IoT systems and M2M applications; 4G LTE Cat 4 up to 150 Mbps; 3G and 2G; Dual SIM with automatic switching; RS232 and RS485; GNSS; WiFi 4; 1 x WAN and 3 x LAN 10/100 Mbps; extensive input and output interfaces; USB 2.0; microSD slot up to 2 TB; Modbus RTU/TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-30 VDC; RutOS operating system; Teltonika RMS support. Teltonika RUT906

24h
Available
Available quantity: 1

Description

Industrial cellular router designed for integrating devices using RS232 and RS485 interfaces with cellular networks, Ethernet, IoT and M2M systems. Teltonika RUT906 supports 4G LTE Cat 4 with download speeds up to 150 Mbps and upload speeds up to 50 Mbps, as well as 3G and 2G networks. Two Mini SIM slots enable automatic SIM switching in cases including weak signal, roaming, network loss or data connection failure. The router provides WiFi 4 802.11b/g/n with support for up to 100 simultaneous clients, one 10/100 Mbps WAN port and three 10/100 Mbps LAN ports, as well as RS232 with RTS/CTS flow control and RS485 supporting both 2-wire and 4-wire operation. The extensive I/O set includes digital inputs, a galvanically isolated input, an analogue input with 4-20 mA support, open-collector outputs and a relay output.

The OpenWrt-based RutOS operating system provides routing, load balancing, automatic WAN Failover, firewall, VLAN, VPN and support for Modbus RTU/TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT. The GNSS receiver supports GPS together with NMEA 0183, NTRIP and geofencing functions, enabling use in mobile installations and location-tracking systems. USB 2.0 allows connection of external storage, USB-to-Serial adapters, modems and other devices, while the internal microSD slot supports cards up to 2 TB. Teltonika RMS provides remote configuration, monitoring and VPN access. 9-30 VDC power input and passive PoE 9-30 VDC, an aluminium housing and an operating temperature range from -40°C to 75°C support deployment in industrial automation, telemetry, energy systems, transportation, measurement applications and remote infrastructure monitoring.

Features

  • Cellular connectivity
    • Standards: 4G LTE Cat 4, 3G, 2G
    • 4G LTE speed: up to 150 Mbps download / 50 Mbps upload
    • 3G speed: up to 21 Mbps download / 5.76 Mbps upload
    • 2G speed: up to 236.8 kbps download / 236.8 kbps upload
    • 3GPP: Release 9
    • SMS and USSD support
    • Operator blocklist and allowlist
    • Band management and band lock
    • SIM PIN management
    • Auto APN
    • Bridge and Passthrough modes
    • 2 x SMA connector for LTE antennas
  • Dual SIM
    • SIM slots: 2 x Mini SIM (2FF)
    • SIM voltage: 1.8 V / 3 V
    • External SIM holders
    • Automatic SIM switching
    • SIM Idle Protection
    • Switching criteria: weak signal, data limit, SMS limit, roaming, no network, network denial, data connection failure
  • WiFi
    • Standard: IEEE 802.11b/g/n
    • Class: WiFi 4
    • Operating modes: Access Point (AP), Station (STA)
    • Maximum number of simultaneous clients: 100
    • WPA2-Enterprise
    • WPA2-PSK
    • WPA-EAP
    • WPA-PSK
    • WPA3-SAE
    • WPA3-EAP
    • OWE
    • AES-CCMP
    • TKIP
    • EAP-TLS with PKCS#12 certificates
    • 802.11w Protected Management Frames
    • 802.11s Wireless Mesh
    • 802.11r Fast Roaming
    • 802.11v BSS Transition Management
    • 802.11k Radio Resource Measurement
    • Relayd
    • SSID hiding
    • MAC address-based access control
    • MAC allowlist and blocklist
    • QR code generator for WiFi connection
    • TravelMate
    • 2 x RP-SMA connector for WiFi antennas
  • Ethernet
    • 1 x RJ45 WAN port, 10/100 Mbps
    • 3 x RJ45 LAN ports, 10/100 Mbps
    • Total: 4 x Ethernet ports, 10/100 Mbps
    • IEEE 802.3 and IEEE 802.3u compliance
    • WAN port also compliant with IEEE 802.3az
    • Auto MDI/MDIX
    • Port Mirroring
  • RS232 and RS485
    • 1 x RS232 interface
    • RS232 connector: DB9
    • RTS/CTS flow control
    • RS232 baud rate: 300 to 115200 baud
    • 1 x RS485 interface
    • RS485 Full Duplex: 4-wire
    • RS485 Half Duplex: 2-wire
    • RS485 baud rate: 300 to 230400 baud
    • RS485 connector: 6-pin industrial socket
    • Serial functions: Console, Serial over IP, Modem
  • GNSS
    • Supported system: GPS
    • Coordinates available via WEB UI, SMS, TAVL and RMS
    • NMEA 0183 support
    • NTRIP support
    • Geofencing
    • Antenna connector: 1 x SMA for GNSS
  • Inputs and outputs
    • 1 x digital dry input, 0-3 V
    • 1 x galvanically isolated digital input, 0-30 V
    • 1 x analogue input, 0-24 V with 4-20 mA support
    • 1 x non-isolated digital input on the 4-pin power connector
    • Non-isolated digital input logic low: 0-5 V
    • Non-isolated digital input logic high: 8-30 V
    • 1 x open-collector digital output, 30 V / 250 mA
    • 1 x SPST relay output, 40 V / 4 A
    • 1 x open-collector digital output, 30 V / 300 mA on the power connector
    • Event support via Email, RMS and SMS
    • I/O Juggler for triggering events based on I/O state
  • USB
    • 1 x USB Type-A port
    • Standard: USB 2.0
    • Samba Share support
    • USB-to-Serial support
    • External HDD support
    • USB flash drive support
    • Additional modem support
    • Printer support
    • USB-to-Serial adapter support
    • Supported file systems: FAT, FAT32, exFAT, NTFS read-only, ext2, ext3, ext4
  • microSD storage
    • Internal microSD slot
    • Maximum card capacity: 2 TB
    • Samba Share support
    • Storage Memory Expansion
    • DLNA
    • Supported file systems: FAT32, NTFS, ext2, ext3, ext4
  • Industrial and IoT protocols
    • Modbus TCP: Client, Server
    • Modbus RTU over RS232 and RS485
    • Modbus over USB
    • DNP3: Station, Outstation
    • DNP3 over RS232, RS485, TCP and USB
    • DLMS/COSEM: Client over RS232, RS485 and TCP
    • OPC UA: Client, Server
    • BACnet/IP: Router
    • BACnet RTU over RS485 and USB
    • MQTT
    • Modbus MQTT Gateway
    • Data to Server: HTTP(S), MQTT, Azure MQTT
    • Teltonika Networks Web API
  • Network and routing
    • Static routing
    • Dynamic routing: BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP
    • Policy Based Routing
    • Network Backup: WiFi WAN, cellular, VRRP, wired connection
    • Automatic WAN Failover
    • Load Balancing for multiple WAN connections
    • Protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN, VXLAN
    • VoIP Passthrough: H.323 and SIP ALG
    • DHCP Server and DHCP Relay
    • QoS / Smart Queue Management
    • DDNS
    • DNS over HTTPS
    • Hotspot
    • SSHFS
    • Real-time network traffic monitoring
    • Port Mirroring
  • Security and VPN
    • Firewall
    • NAT, NAT-T, NAT64 and DMZ
    • Port-based and tag-based VLAN
    • DDoS attack prevention
    • Port scan prevention
    • Mobile data quota control
    • Web filtering
    • Access control for SSH, WEB UI, CLI and Telnet
    • Pre-shared key and X.509 certificate authentication
    • TACACS+
    • RADIUS
    • Certificate Manager
    • OpenVPN
    • IPsec with IKEv1 and IKEv2
    • WireGuard
    • ZeroTier
    • GRE
    • PPTP
    • L2TP and L2TPv3
    • SSTP
    • DMVPN
    • Tinc
    • Stunnel
  • Management and software
    • Operating system: OpenWrt-based RutOS
    • WEB UI via HTTP/HTTPS
    • Teltonika Remote Management System (RMS)
    • FOTA
    • SSH v1 and v2
    • SNMP v1, v2 and v3
    • SNMP Trap
    • TR-069
    • JSON-RPC
    • MQTT Broker and MQTT Publisher
    • ThingWorx support
    • Cumulocity support
    • Azure IoT Hub support
    • AWS IoT Core support
    • Package Manager
    • BusyBox shell, Lua, C and C++ support
    • Python and Java support through Package Manager
    • SDK for custom software development
  • Hardware
    • CPU: MediaTek 580 MHz, MIPS 24KEc
    • RAM: 128 MB DDR2
    • Flash storage: 16 MB SPI Flash
  • Power supply
    • Input voltage: 9-30 VDC
    • Power connector: industrial 4-pin connector
    • Reverse polarity protection
    • Surge protection
    • Passive PoE over spare pairs on the LAN1 port
    • Passive PoE: Mode B, 9-30 VDC
    • Passive PoE not compliant with IEEE 802.3af, 802.3at and 802.3bt
    • Idle power consumption: < 2 W
    • Maximum power consumption: < 7 W
  • Mechanical and environmental specifications
    • Housing: aluminium with plastic panels
    • Dimensions: 109.5 x 50 x 100 mm
    • Weight: 295 g
    • Ingress protection rating: IP30
    • Operating temperature: -40°C to 75°C
    • Operating humidity: 10% to 90%, non-condensing
    • DIN rail, wall or flat-surface mounting with an additional kit
    • 1 x bi-colour connection status LED
    • 5 x cellular signal strength LED
    • 4 x Ethernet status LED
    • 1 x power LED
    • Reset button

Kit includes

  • Teltonika RUT906 router
  • 9 W power supply
  • 2 x LTE antenna
  • 2 x WiFi antenna
  • GNSS antenna
  • Connector set
  • 1.5 m Ethernet cable
  • SIM adapter kit
  • Quick Start Guide
1208016

Data sheet

Cellular Network Standard
4G LTE Cat 4 / 3G / 2G
WiFi module
Yes
Wi-Fi standard
802.11 b/g/n
WiFi Band
2,4 GHz
Number of Ethernet Ports
4
Number of SIM Cards
2
eSIM
No
GNSS
Yes
PoE
Yes
VPN
Yes
Bluetooth module
No
RS232
1
RS485
1
DIN Rail Mounting
Yes
Power supply voltage
9 - 30 V DC
Tightness class
IP30

You might also like

Other products in the same category (16)