![H34C 433MHz radio module H34C 433MHz radio module](https://kamami.pl/45186-large_default/h34c-433mhz-radio-module.jpg)
![H34C 433MHz radio module H34C 433MHz radio module](https://kamami.pl/45186-large_default/h34c-433mhz-radio-module.jpg)
zł5.91 tax excl.
Wireless data transmission module operating at 433 MHz. It is powered with the voltage of 12 V
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Wireless data transmission module that can operate in the 433 MHz frequency band. The maximum transmitting power of the module is 27 dBm and can transmit data up to 500 m in open space. There is a pin on the board that allows you to connect an external antenna. The module is powered with the voltage of 12 V and communicates via a single-wire digital interface.
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x\'s). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900MHz to the Internet or your mobile device. Adafruit 3230
The ISM radio module in the SMD housing. It works on 433MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-433S2P
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
No product available!
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
A long-range RF sub-GHz wireless transceiver module capable of operating in the 868 MHz frequency band. The integrated architecture allows the use of a minimum number of external components with maximum design flexibility. RFM69HW868
A module with a 433 MHz radio transmitter for the M5Stack sets. Based on the SYN115 chip, it has a built-in PCB antenna. M5Stack U114
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
The FS1000A transmitter and the MX-RM-5V receiver enable communication in the ISM band; they are easy to use, do not require advanced bus control and have very small dimensions. Especially recommended for work with Arduino and STM32
A long-range RF sub-GHz wireless transceiver module capable of operating in the 433 MHz frequency band. The integrated architecture allows the use of a minimum number of external components with maximum design flexibility. RFM69HW433
Multi-channel wireless data transmission module operating at 433 MHz. It is supplied with the voltage ranging from 3.2 V to 5.5 V and communicates via the UART interface
No product available!
MOD-33 / AZ
The NRF24L01+ chip module for radio communication, which operates in the 2.4 GHz ISM band. It is used in various applications such as wireless sensors, remote control, wireless networks. It supports the Enhanced ShockBurst protocol, which provides automatic packet handling. It communicates via an SPI interface
Module with a 433 MHz radio receiver for M5Stack sets. Based on the SYN531R chip, it has a built-in PCB antenna. M5Stack U113
2.4 GHz RF module with nRF24L01+ chip. The module has an RP-SMA connector with reverse polarity, allowing the connection of an external antenna. The system has a built-in 3.3 V stabilizer and IO lines with a tolerance of 5 V. SparkFun WRL-00705
Adapter with 3.3V voltage regulator designed for NRF24L01 modules with 8-pin connector
A GFSK transceiver operating in the ISM 2400 ... 2483.5 MHz frequency range. Powered by a voltage of 1.9 ... 3.6 V, the pins are goldpin connectors. It has a built-in PCB antenna. HOPE MICROELECTRONICS RFM75-S
The ISM radio module in the DIP housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868DP
HAT module with RFM95W 868 MHz system for LoRa/LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4074
WIFI-LPT100 Eval Kit module enables UART data transmission via WiFi, ultra low power consumption, encrypted communication
No product available!
NRF24L01 module with USB type A connector. It has a built-in antenna and a USB converter. Allows you to design and test 2.4 GHz radio communications using a PC
No product available!
Wireless data transmission module operating at 433 MHz. It is powered with the voltage of 12 V