RP2040-LCD-1.28 - module with round IPS 1.28" LCD display and RP2040 microcontroller
ID: 1181521
5906623426874
zł76.51
Tax included
zł62.20 tax excl.
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and RP2040 microcontroller. Equipped with an accelerometer and a gyroscope. Waveshare RP2040-LCD-1.28
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The module with a round, color IPS 1.28" LCD display with a resolution of 240x240 pixels and the RP2040 chip. The microcontroller has two ARM Cortex M0+ cores operating at a frequency of 133 MHz and 264 KB of RAM. 2 MB external memory connected via QSPI interface.
| 1. USB typ C | 5. RP2040 |
| 2. ETA6096 | 6. NOR-Flash 2 MB W25Q16JVUXIQ |
| 3. Battery header | 7. RP2040 |
| 4. IMU QMI8658C | 8. Przycisk RESET |
| 9. Przycisk BOOT |
The display used has a built-in GC9A01A controller that communicates via the SPI interface. It can display content in the full 65K color gamut. Additionally, the user has at his disposal a 6-axis IMU QMI8658C system, which combines an accelerometer and a gyroscope, a lithium battery charger and connectors with the derived GPIO pins.
The RP2040 microcontroller is programmed via the USB type C connector and supports the popular MicroPython and C/C++ programming languages. The module will be used in small IoT projects and in building your own watch. Full documentation and sample programs are available on the product page.
Features
- RP2040 microcontroller
- Two ARM Cortex-M0 + cores clocked up to 133 MHz
- 264 kB of onboard SRAM
- 2 MB external QSPI Flash memory
- Display type: LCD IPS
- Diameter 1.28 "
- Resolution: 240x240 px
- Interface: SPI
- Spot size: 0.135 x 0.135 mm
- Display color: RGB 65K
- Wide viewing angle
- Display driver GC9A01
- 6-axis IMU QMI8658C
- Lithium battery charger
- GPIO connector: 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x PWM
1181521
Data sheet
- Microcontroller
- RP2040
- Flash memory
- Brak
- Number of I/O
- 08
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- USB connector type
- USB type C
You might also like
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
zł4.10
24h
Available quantity: 6
Available
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.71
24h
Available quantity: 31
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.77
24h
Available quantity: 21
Available
Cable with USB type A and USB type C 2.0 plugs, cable length 1 m
zł4.53
Delivery date unknown
No product available!
Cable with USB type A and USB type C 2.0 plugs, cable length 1 m
zł4.67
24h
Available quantity: 8
Available
Other products in the same category (16)
Board with RP2040 microcontroller and class D mono audio amplifier based on MAX98357 chip. It has a built-in LIS3DH three-axis accelerometer, an RGB NeoPixel LED, a LiPo charging circuit, and a STEMMA QT connector. Adafruit 5768
zł122.47
24h
Available quantity: 7
Available
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
zł232.36
4 weeks
No product available!
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM636
zł185.58
24h
Available quantity: 4
Available
Base board with soldered Raspberry Pi Pico W module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI-W
zł85.05
24h
Available quantity: 2
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00053
zł159.00
24h
Available quantity: 17
Available
Board with the RP2040 microcontroller in the form of a USB dongle. Equipped with edge connectors, RGB LED, boot and reset button. Waveshare RP2040-One
zł25.83
24h
Available quantity: 20
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 1674
Available
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669
zł282.91
Delivery date unknown
No product available!
Development board based on the RP2040 microcontroller. It is equipped with a 1.14" color LCD display and a built-in debugging tool via USB interface. The board is enclosed in a plastic housing. Waveshare RP2040-GEEK
zł53.90
24h
Available quantity: 7
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 5302
zł49.30
24h
Available quantity: 6
Available
Raspberry Pi Pico W soldered board module dedicated to matrix displays with HUB75 interface. Pimoroni PIM662
zł106.76
Delivery date unknown
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity. Raspberry Pi SC0918
zł27.90
24h
Available quantity: 2079
Available
A kit containing an LED strip driver module and WS2812/Neopixel tape. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM657
zł187.89
Delivery date unknown
No product available!
Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels, equipped with Raspberry Pi Pico W. It offers WiFi communication and has built-in buttons with LED indicators, which allows you to build a simple user interface. Included with accessories. Pimoroni PIM671
zł729.00
Delivery date unknown
No product available!
Base board with soldered Raspberry Pi Pico module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI
zł68.11
24h
Available quantity: 10
Available
Mini board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz and 264 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM558
zł55.35
24h
Available quantity: 5
Available
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and RP2040 microcontroller. Equipped with an accelerometer and a gyroscope. Waveshare RP2040-LCD-1.28