Gravity: Analog Ambient Light Sensor - module with an analog TEMT6000 light sensor
ID: 581622
5906623406487
zł30.53
Tax included
zł24.82 tax excl.
Module with an analog TEMT6000 light intensity sensor. The voltage at the output is linearly correlated with the intensity of the incident light. The module is supplied with the voltage from 3.3 to 5V. DFRobot SEN0043
Description
Module with an analog TEMT6000 light intensity sensor. The sensor is based on a phototransistor, it is placed in a small SMD housing and has a wide sensitivity angle. The voltage at the output is linearly correlated with the intensity of the incident light. The sensor is powered with the voltage ranging from 3.3 V to 5 V and has an analog output (Gravity connector). The product wiki page includes the manual and sample programs.
Features
- Analog output
- Detection range: 1 to 1000 lux
- Wide detection angle: ϕ = ± 60°
- Gravity connector
- Supply voltage: from 3.3 V to 5 V
- Current consumption: 20 mA
- Working temperature: -40 to 85°C
- Dimensions: 30 x 22 mm
Kit contains
- Modułe with Analog Ambient Light Sensor TEMT6000
- Gravity cable
581622
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
Module with an analog TEMT6000 light intensity sensor. The output voltage increases with increasing intensity of the incident light. The sensor is powered by 5 V. SparkFun BOB-08688
zł32.82
Delivery date unknown
No product available!
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.65
24h
Available quantity: 1
Available
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
zł89.20
Delivery date unknown
No product available!
Other products in the same category (16)
Module with a light intensity sensor BH1750FVI dedicated to the M5StickC sets. It communicates via the I2C interface. M5Stack U134
zł27.90
1 weeks
No product available!
TCS34725 RGB Color Sensor is a color sensor TCS34725 controlled by the I2C interface. It is powered by voltage in the range of 3.3 ... 5V and is intended for Arduino-compatible boards. DFRobot SEN0212
zł36.30
24h
Available quantity: 3
Available
Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681
zł22.71
24h
Available quantity: 1
Available
Module with a SI1151 light sensor that can detect waves with a wide range of wavelengths: visible and infrared light. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020089
zł54.75
4 weeks
No product available!
Module with ultraviolet (UV) sensor based on the GUVA-S12D system. It allows measurement of radiation with a wavelength in the range from 240 to 370 nm. The module has a connector in accordance with the Grove standard. Seeed Studio 101020043
zł54.30
4 weeks
No product available!
Compact expansion with advanced data monitoring features, equipped with temperature, humidity, light sensors and RTC clock. With low power consumption, battery monitoring function and I2C protocol support, it is ideal for long-term battery-powered projects, offering precise measurements and efficient power management. Seeed Studio 114993446
zł45.51
24h
Available quantity: 5
Available
Module with an analog light sensor. It consists of a photoresistor and a LED. Equipped with a Gravity connector. DFRobot DFR0022
zł12.56
24h
Available quantity: 2
Available
Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161
zł33.90
24h
Available quantity: 3
Available
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4831
zł25.10
24h
Available quantity: 13
Available
UV Sensor with response spectrum: 200nm-370nm
zł36.97
24h
Available quantity: 1
Available
AS7331 UV light sensor module. It allows you to measure UV radiation on three channels: UVA (320-400nm), UVB (280-320nm) and UVC (200-280nm). Communication with AS7331 takes place via the I2C interface and the Qwiic connector. SparkFun SEN-23518
zł154.71
24h
Available quantity: 1
Available
Ambient light sensor placed in a transparent hemisphere. It supports a detection range of 0 to 200 klx and communicates via the I2C interface. DFRobot SEN0390
zł44.72
24h
Available quantity: 2
Available
Compact light sensor that provides precise measurement of both illuminance (10–10000 Lux) and correlated color temperature (2700K–6500K), with low measurement errors. Thanks to I2C and UART interfaces, the sensor easily integrates with platforms such as Arduino or Raspberry Pi, making it an ideal tool for photographers, filmmakers and projects requiring lighting control. DFRobot SEN0611
zł135.47
24h
Available quantity: 2
Available
Precision XYZ color and light sensor with I2C interface. Measures light intensity and color components, features STEMMA QT / Qwiic connectors. Adafruit 6335
zł50.09
24h
Available quantity: 1
Available
Module with color sensor TCS3472. The board communicates via the I2C interface. Waveshare TCS34725 Color Sensor
zł34.00
24h
Available quantity: 3
Available
Ambient light sensor housed in a transparent hemisphere and waterproof housing. It supports a detection range of 0 to 65535 lux and communicates via an I2C interface. DFRobot SEN0562
zł41.59
24h
Available quantity: 4
Available
Module with an analog TEMT6000 light intensity sensor. The voltage at the output is linearly correlated with the intensity of the incident light. The module is supplied with the voltage from 3.3 to 5V. DFRobot SEN0043