Gravity: BMM150 Triple Axis Magnetometer - module with 3-axis magnetometer
ID: 1182939
5902186310780
zł40.47
Tax included
zł32.90 tax excl.
A module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C interface. DFRobot SEN0529
Description
The BMM150 3-axis magnetometer module, which allows magnetic field measurements in the range of ±1300 μT (x- and y-axis) and ±2500 μT (z-axis) with a resolution of 0.3 μT. Based on Bosch's proprietary FlipCore technology, it provides absolute orientation information with high measurement accuracy. Thanks to its small size, it is particularly suitable for course determination in drones. The module communicates via the I2C interface (Gravity connector) and is powered by 3.3 V to 5 V. The user can configure the I2C address using two jumpers, so up to 4 modules can be connected on a single bus. Full documentation of the module with examples of use is available on the product page.
Features
- Measurement range: ± 1300 μT (x, y axis), ± 2500 μT (z axis)
- Resolution: 0.3 μT
- Accuracy: 30 μT
- I2C interface (Gravity connector)
- Programmable interrupt
- Zero-B offset: ±40μT/±2μT
- Nonlinearity: ＜1%FS
- Low noise: 0.3-1.4μT
- I2C address: 0x13
- Start time: 3ms
- Supply voltage: 3.3 V to 5 V
- Current consumption: up to 1.7 mA
- Operating temperature: from -40 to 85°C
- Dimensions: 32 x 27 mm
Kit contains
- Gravity: BMM150 Triple Axis Magnetometer
- Gravity-4P I2C/UART cable
- 5-pin male goldpin connector
1182939
Data sheet
- Interface
- I2C
- Type of sensor
- BMM150
- Power supply voltage
- 3,3 - 5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.65
24h
Available quantity: 1
Available
A set of 37 sensors with Gravity connectors for Arduino. It includes a suite of the most popular DFRobot sensors, such as light, gas, sound, touch sensors, distance sensor and accelerometer. DFRobot KIT0150
zł411.47
Delivery date unknown
No product available!
A set of 10 cables, 30 cm long, compliant with the Gravity standard. DFRobot FIT0513
zł28.09
24h
Available quantity: 7
Available
Other products in the same category (16)
Module with a 3-axis MMC5983MA mega-meter. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-19921
zł86.80
3 weeks
No product available!
HMC5883L digital electronic compass 3-axis magnetoresistive sensor module with level converter, RoHS
zł12.87
24h
Available quantity: 2
Available
Module with a 3-axis magnetometer BMM150. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020492
zł53.46
4 weeks
No product available!
Module with a 3-axis magnetic field sensor LIS3MDL. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4479
zł50.17
24h
Available quantity: 2
Available
Module with a 3-axis magnetometer based on the MLX90393 system. It has a measuring range from ± 5mT to ± 50mT and a resolution of 0.161 µT. The I2C or SPI interface is used for communication. Adafruit 4022
zł54.75
24h
Available quantity: 1
Available
Module with 3-axis digital compass, HMC5983, I2C, SPI, RoHS
zł69.90
24h
Available quantity: 1
Available
Module with a 3-axis magnetometer based on the BMM150 system. It communicates via the I2C or SPI interface. DFRobot SEN0419
zł30.52
24h
Available quantity: 2
Available
Complete kit for building a gradiometer, including two FG-3+ magnetometer sensors, a PCB board, Android-enabled software, and a mobile app. The kit allows for easy assembly and quick start-up of the device, which will immediately start displaying readings on the LCD after connection. Additional accessories, such as sensor holders, sensor tuning pipes, and a housing, provide convenience, safety, and precise adjustment of the device to use. SparkFun WIG-25530
zł1,992.69
3 weeks
No product available!
Module with a 3-axis magnetic field sensor MMC5603. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5579
zł30.90
24h
Available quantity: 7
Available
Module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C or SPI interface. Waveshare BMM150 3-Axis Magnetometer Sensor
zł29.56
24h
Available quantity: 2
Available
Module with 3-axis magnetometer MAG3110, I2C, RoHS
zł54.58
24h
Available quantity: 3
Available
Precise Hall effect sensor that converts magnetic field intensity into analog voltage. Differential response to magnetic poles (voltage increases when approaching S pole and decreases at N pole) enables precise analysis of field direction and strength. High sensitivity, low noise and compatibility with platforms such as Arduino and micro:bit make the sensor ideal for industrial, educational and hobby applications. DFRobot DFR1132
zł11.71
24h
Available quantity: 2
Available
Module with TLV493D 3-axis magnetic field sensor. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4366
zł35.17
4 weeks
No product available!
A module with a magnet sensor that allows you to detect the presence of an object emitting a magnetic field in the environment. The module is supplied with the voltage ranging from 3.3 V to 5 V and has a digital output. DFrobot DFR0033
zł13.74
24h
Available quantity: 1
Available
PmodCMPS2 is a module with a digital magnetometer based on the Memsic MMC34160PJ system. It has a resolution of 0.5 mG (within ± 16) and accuracy up to 1 °. For communication with the module, an I2C interface is provided on the 6-pin Pmod connector. Digilent 410-355
zł38.82
3 weeks
No product available!
Precise 3-axis compass based on FlipCore and TMR technology, offering magnetic field measurement in the range of ±2000μT without the need for calibration. With I3C support, sampling rate up to 400 Hz and Field Shock Recovery function, it is perfect for navigation systems, AR/VR, drones and autonomous vehicles. DFRobot SEN0619
zł41.51
24h
Available quantity: 4
Available
A module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C interface. DFRobot SEN0529