

zł38.47 tax excl.
Module with relay HF152FD 16A. It allows you to control devices with a current consumption of up to 16A using a low-power signal. The module has a relay activation time of about 10ms. DFRobot DFR0251
Module with the relay HF152FD 16 A. It allows you to control devices with a current consumption of up to 16 A using a low power signal. The module has a relay activation time of approx. 10 ms. It can be used to control e.g. lighting or electrical devices such as solenoid valves and motors. On the Wiki page there is a connection manual and sample programs.
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
No product available!
Set of 10 cables, 30 cm long, for digital sensors compatible with the Gravity standard. DFRobot FIT0011
Module with 5V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.
A magnetic latching relay that features low power consumption and quiet operation. It allows switching of signals up to 36 V and 10 A. It remains in the last position it was in before power was lost. DFRobot DFR0996
Module with 64 relays with a maximum switching current of 10 A. It communicates via the USB interface. Numato Lab RL640001
No product available!
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano
Industrial module with an Ethernet interface that allows you to control 8 relays via the RJ45 port. It uses Modbus TCP protocol, supports PoE (Power over Ethernet) and is equipped with a rail-mounted housing. Waveshare Modbus POE ETH Relay
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
No product available!
Module with 8 digital inputs and 4 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8024ADAM
No product available!
Module with 4 relays 12 V with a maximum switching current of 7 A. Numato Lab RL40002
Power module with IRFR4105Z transistor (MOD-30.Z), maximum current 2A, 5V power supply or 5V - 12V range (selection by jumper)
Module with 4 relays with a maximum switching current of 7 A. Equipped with the ATmega328P microcontroller, it can be programmed in the Arduino IDE. Numato Lab PRLY002
I/O module supporting Modbus RTU via USB and RS485 and Modbus TCP via Ethernet. It has 4 built-in SPST relays and 8 digital inputs, 8 digital outputs and 4 analog inputs. Provides a flexible DIN rail mounting system. Numato Lab NLRXE002-A
No product available!
Module with 4 SSR relays with a load of up to 3 A. The board communicates via the USB interface. Numato Lab SSR40001-AC
No product available!
Module with 16 24 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 16ETHRL001-24
No product available!
Extension module designed for home automation projects compatible with Raspberry Pi. The board is equipped with a 24 V 2 A relay, three buffer inputs, three sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM487
No product available!
Module with 5 V relay with a maximum switching current of 2 A. It communicates via the USB interface and does not require an additional power supply. Numato Lab USBPOWRL002
Module with monostable relay. It allows you to control high-power elements with a microcontroller. Adafruit 2895
Module with relay HF152FD 16A. It allows you to control devices with a current consumption of up to 16A using a low-power signal. The module has a relay activation time of about 10ms. DFRobot DFR0251