WEP 968DA + 2in1 soldering station - hot air  and tip soldering iron
  • WEP 968DA + 2in1 soldering station - hot air  and tip soldering iron
  • WEP 968DA + 2in1 soldering station - hot air  and tip soldering iron
ID: 578807
Tax included

zł392.40 tax excl.

The WEP 968DA + soldering station is a hot air station and a soldering iron with LED display. It is equipped with a SAMSUNG microprocessor that checks the station's operating parameters and corrects them to the set values. The station is suitable for soldering and desoldering electronic components such as SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 968DA+

Available quantity: 1

Free shipping

free shipping in Poland for all orders over 500 PLN


Same day shipping

If your payment will be credited to our account by 11:00


14 days for return

Each consumer can return the purchased goods within 14 days


The WEP 968DA + 2 in 1 soldering station has hot air and a soldering iron. It has large LED displays significantly facilitating operation, a powerful and stable SAMSUNG microprocessor controlling the operation of the device and a soldering tip soldering power 70 W with extraction of vapors from under the tip. The temperature correction function depends on the operating environment, heating element efficiency, blowing power and tip wear. The big advantage is the air flow up to 28 L / min, the source is the compressor.

The station has a function check function, we receive messages about a short circuit, circuit overload, failure to achieve the set temperature. All these errors are shown on the display.


  • Power consumption: 720 W
  • Temperature range of the tip flask: 200 - 480°C
  • Hotair flask temperature range: 100 - 480°C
  • Power of the tip soldering iron: 70 W
  • Air supply source: compressor
  • Air flow: up to 28 L/min
  • Display type: LED
  • Temperature stability: ±1°C
  • Arrowhead ground voltage: <2 mV
  • Ground wire resistance: <2 ohm


  • WEP 968DA + soldering station with hot air soldering iron
  • Hot air flask holder
  • 908A tip flask with fume extraction
  • Stand for the stock tip with tip cleaning sponge and tin holder
  • Set of 5 reduction nozzles:
    • Round nozzle with a diameter of 2.5 mm 1124
    • Round nozzle with a diameter of 4.4 mm 1130
    • Round nozzle with a diameter of 7 mm 1196
    • Round nozzle with a diameter of 9 mm 1197
  • Square nozzle 12 x 12 mm 1313
  • Power cable
  • Spare filter for fume extraction
  • Gripper for lifting systems
  • User manual

Data sheet

Station type
2in1 (tip soldering iron + hotair)
Tip soldering iron temperature
200 - 480 °C
HotAir temperature
100 - 480 °C
70 W

You might also like

Other products in the same category (16)