![Main view Main view](https://kamami.pl/70166-large_default/cp503b-current-probe-for-micsig-oscilloscopes.jpg)
![Main view Main view](https://kamami.pl/70166-large_default/cp503b-current-probe-for-micsig-oscilloscopes.jpg)
zł3,332.52 tax excl.
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 50 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP503B
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Probe for measuring DC and AC current up to 30 A. Uses standard BNC interface and can be connected to an oscilloscope or a multimeter. It works in the frequency band up to 50 MHz, has two measuring ranges: 6 and 30 A. The probe can work with manual or automatic regulation and is powered by a USB connector. It can be used in industry, automotive electronics, power supplies and inverters. Dedicated to Micsig devices.
Portable tBook mini oscilloscope with 8 "LCD display and touch screen. It has two measuring channels and is characterized by good measurement parameters: 150 MHz band, sampling rate of 1 GSa/s and 28 Mpts memory buffer. Micsig TO1152 Plus
No product available!
Portable Smart oscilloscope with 8-inch LCD display and touch screen. It has two measurement channels and is characterized by good measurement parameters: 150 MHz band, sampling rate 1 GSa/s and memory buffer 28 Mpts. Micsig STO1152 Plus
No product available!
Probe for measuring direct and alternating current with a current of up to 30 A. Works in the band up to 50 MHz, it can be connected to the oscilloscope through the UPI connector. It does not require an external power supply. Micsig CP503
No product available!
Test probe tip with 500X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP500-2
No product available!
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 100 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP1003B
No product available!
Test probe tip with 50X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP50-5
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.0mm
No product available!
Universal oscilloscope probe with BNC connector and 10:1 voltage divider. It has a frequency response of 80 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-90
BNC connector cable (adapter) to the "Alligator clip" connector. It allows you to conveniently connect the device, e.g. to an oscilloscope. Digilent (240-134)
Oscilloscope Probes (pair). 460-004
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of the device to an oscilloscope, for example. Hantek HT30A
A set of needle probes used for piercing wire insulation. They can be used as pin probes when working with small PCBs or connectors. Hantek HT307
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP702
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
A probe with a Rogowski coil dedicated to measuring current in a wide frequency range. Measurements can be made without modifying the circuit under test. Micsig RCP500
No product available!
High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100
No product available!
BNC connector adapter cable for mini-grabber clips. Connects to Analog Discovery 2 via a BNC adapter. Digilent 240-136
Oscilloscope probe with BNC plug with 100MHz bandwidth. Uni-T UT-P04
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 50 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8050
No product available!
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 50 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP503B