PP-200 - oscilloscope probe x10 600V 200MHz
ID: 1183460
5906623408313
zł73.82
Tax included
zł60.02 tax excl.
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
Description
Universal oscilloscope probe with BNC connector, 10:1 voltage divider and 200 MHz frequency response. It allows you to make measurements with a maximum voltage of up to 600 V. The probe is terminated with a sharp tip on which a cap with a hook can be applied, while the ground wire has a crocodile connector. It can work with analog and digital oscilloscopes with a standard BNC connector.
Features
- Bandwidth:
- x1: 6 MHz
- x10: 100 MHz
- Maximum voltage:
- x1: 200 V DC + Peak AC
- x10: 600 V DC + Peak AC
- Attenuation: x1, x10
- Input impedance: 1 MΩ, 100 MΩ
- Input capacitance:
- x1: 85pF - 115pF
- x10: 18.5pF - 22.5pF
- Compensation range: 15 pF to 35 pF
- Cable length: 120 cm
- Operating temperature: -10 to 50°C
- Operating humidity: up to 85%
Kit contains
- Oscilloscope probe with BNC connector
- Measuring cap
- Set of color markers
1183460
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A multifunctional device (computer attachment) that combines a 2-channel digital oscilloscope and a 16-channel logic analyzer. Hantek6022BL
zł383.75
24h
Available quantity: 6
Available
Digital oscilloscope. It has two measurement channels with 100 MHz bandwidth. Hantek DSO2C10
zł876.56
Delivery date unknown
No product available!
Digital oscilloscope with built-in signal generator. It has two measurement channels with 100 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek DSO2D10
zł955.93
Delivery date unknown
No product available!
Other products in the same category (16)
A probe tip with attenuation factor of 200X. Dedicated to Micsig probes from the SigOFIT series operating in the frequency band of 100MHz, 200MHz and 350MHz. Micsig OP200-3
zł1,398.90
4 weeks
No product available!
Universal oscilloscope probe with BNC connector. It has a voltage divider of 10:1 and offers a frequency response of 100 MHz. It allows measurements with a maximum voltage of up to 600 V. P6100
zł54.16
24h
Available quantity: 16
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3002
zł1,902.91
4 weeks
No product available!
High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100
zł92.69
24h
Available quantity: 5
Available
A set of needle probes used for piercing wire insulation. They can be used as pin probes when working with small PCBs or connectors. Hantek HT307
zł33.12
24h
Available quantity: 16
Available
Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000
zł1,199.03
24h
Available quantity: 1
Available
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł133.54
24h
Available quantity: 10
Available
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is perfect for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP600XS
zł4,059.00
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 150 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3001
zł1,499.04
24h
Available quantity: 1
Available
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of a device to an oscilloscope, for example. BNC Q9
zł12.76
4 weeks
No product available!
A probe tip with attenuation factor of 5000X. Dedicated to Micsig probes from the SigOFIT series operating in the 500 MHz frequency band. Micsig OP5000-5
zł4,065.81
4 weeks
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł28.11
24h
Available quantity: 18
Available
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 1 GHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP1000P
zł112,990.00
4 weeks
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.0mm
zł47.90
24h
Available quantity: 4
Available
Oscilloscope Probes (pair). 460-004
zł136.75
24h
Available quantity: 3
Available
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP1000-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,600.76
Delivery date unknown
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200