

zł192.59 tax excl.
Extension board designed for MicroMod main modules. Equipped with a temperature, humidity and pressure sensor BME280, UV sensor VEML6075 and lightning sensor AS3935. SparkFun DEV-16794
MicroMod Weather Carrier Board is an expansion board designed for MicroMod main modules. It was equipped with a temperature, humidity and pressure sensor BME280, UV sensor VEML6075 and lightning sensor AS3935. There is a microSD card slot on the board and a USB type C connector, which can be used both for power supply, system programming and communication. The module with the microcontroller is plugged into the M.2 connector. Additionally, the board has a backup battery for the RTC and buttons (Reset and Boot). The module is also equipped with a clamp connector for connecting a soil moisture sensor and an RJ11 connector for the Weather Meter Kit wind parameter set. For more advanced users, SWD pins have been introduced, allowing the full use of the set's capabilities. On the product page, there is a guide with sample programs that will help you get started with the kit.
MicroMod is an interface ecosystem that connects the main module to the processor or the microcontroller to various peripherals through expansion boards. Using the M.2 standard, MicroMod allows easy replacement of main modules.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Extension board designed for MicroMod main modules. Equipped with LCD TFT 2,4", LED and buttons. SparkFun DEV-16985
No product available!
Extension board designed for MicroMod main modules. Equipped with a microSD card slot and connectors with SPI, UART and I2C interfaces. It allows you to log data from peripheral devices. SparkFun DEV-16829
MicroMod main module equipped with Bluetooth 5.0 Sparkfun Artemis. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16401
MicroMod main module with ESP32 chip. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun WRL-16781
MicroMod main module with SAMD51 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16791
MicroMod main module with nRF52840 chip equipped with Bluetooth 5.1. The board uses an M.2 connector, so it can work with MicroMod expansion boards. SprakFun DEV-16984
MicroMod main module with RP2040 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-17720
Function module designed for MicroMod boards. Equipped with the LTE/GNSS SARA-R5 system, which offers Secure Cloud LTE-M and NB-IoT communication. SparkFun GPS-18431
No product available!
The MicroMod main module with the STM32WB5MMG microcontroller, which allows communication under the Bluetooth Low Energy 5.3, Zigbee and OpenThread protocols. It is equipped with an M.2 connector and can work with MicroMod expansion boards. SparkFun DEV-21438
Set of M.2 connectors for MicoMod modules. Necessary when designing your own expansion board. SparkFun KIT-16549
Extension board designed for MicroMod main modules. It is equipped with a Qwiic connector and one place to attach Qwiic boards. SparkFun DEV-17723
Extension board designed for MicroMod main modules. Equipped with LCD TFT 2,4", LED and buttons. SparkFun DEV-16985
No product available!
Function module designed for MicroMod boards. It combines the SGP40 (air quality), SHTC3 (temperature and humidity) and STC31 (CO2 concentration) sensors and communicates via the I2C interface. SparkFun DEV-18632
No product available!
Extension board designed for MicroMod processor modules. All the pins are led out to connectors with a pitch of 2.54 mm. SparkFun DEV-16885
Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573
The main MicroMod module with the iMXRT1062 microcontroller known from the popular Teensy boards. It has built-in additional protection against reading the program. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-18771
No product available!
Extension board designed for MicroMod main modules. Connects to a display or TV via HDMI. SparkFun SPX-17718
Extension board designed for MicroMod main modules. It is equipped with Qwiic and mikroBUS connectors. SparkFun DEV-18710
Function module designed for MicroMod boards. It allows you to add Ethernet communication with PoE function based on the W5500 chip to the project. SparkFun COM-18708
MicroMod main module equipped with Bluetooth 5.0 Sparkfun Artemis. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16401
MicroMod main module with RP2040 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-17720
MicroMod main module with STM32 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SparkFun DEV-21326
No product available!
MicroMod main module with nRF52840 chip equipped with Bluetooth 5.1. The board uses an M.2 connector, so it can work with MicroMod expansion boards. SprakFun DEV-16984
Extension board designed for MicroMod main modules. Equipped with a temperature, humidity and pressure sensor BME280, UV sensor VEML6075 and lightning sensor AS3935. SparkFun DEV-16794