WEP 952D + 2 in 1 soldering station + compressor
ID: 578801
zł249.00
Tax included
zł202.44 tax excl.
The WEP 952D+ soldering station is equipped with a 640 W hotair , 60 W tip, and a compressor. It combines simple operation and a very long life, it is perfectly suited to work in small services, homes, workshops.WEP 952D+
Description
The WEP 952D+ soldering station is a classic 2in1 soldering station with a hot air and tip. It is characterized by simple and intuitive operation and high durability of heating elements. It enables real temperature reading and its stabilization thanks to the use of a micro PID controller. The station fully supports ESD safe technology, thanks to which it is certain that no electric charges are accumulating on the tip of the grotto, which could damage the soldered elements.
Features
- Power supply: 230 V AC +/- 10%
- Total peak power: 700 W
- Length of power cable: 130 cm
- Electronics power supply: transformer
- Dimensions: 285 x 190 x 137 mm
- Weight: 3.3 kg
- Real temperature reading
- Temperature stabilization: Digital PID
- Display type: LED
- Control: single-turn potentiometers
- Hotair specification:
- Peak power: 640 W
- Heater supply voltage: 230 V AC
- A spiral heater mounted on a ceramic core with an integrated thermocouple type K.
- Mica insulation
- Temperature adjustment range: 100-500°C
- Temperature stability (static): 1°C
- Stock tube length: 90 cm
- Air supply: Compressor
- Compressor power: 18 W
- Generated pressure: 0.032 MPa
- Capacity: 32 L/min
- Tip stock specification:
- 60W peak power
- Heater supply voltage: 24 V AC
- Temperature adjustment range: 100 - 500°C
- Temperature stability (static): 1°C
- Stock tube length: 80 cm
- Heater: metal with an integrated type K thermocouple
- Tip resistance to the ground: less than 2 Ohm
Included
- WEP 952D + station with integrated hotair and power cable
- WEP 907A stock with tip T-I
- A set of three round nozzles: 2.4 mm, 4.5 mm, 7 mm, 9 mm
- Metal stand for the hotair flask
- Stand for the arrowhead
- Tip cleaning sponge
- Gripper for electronic components
578801
Data sheet
- Station type
- 2w1 grotowa, hotair + kompresor
- Tip soldering iron temperature
- 100 - 500 °C
- HotAir temperature
- 100 - 500 °C
- Power
- 60W
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
zł4.31
24h
Available quantity: 187
Available
RF800 flux is a medium-active rosin solution that does not require washing. AG Termopasty ART.AGT-042
zł4.66
24h
Available quantity: 28
Available
The 55x55 mm tip cleaning sponge effectively removes solder and flux residue during soldering. Working with a damp sponge helps maintain tip health and ensures consistent solder joint quality. Designed for everyday use in electronics workshops, service centers, and hobby workshops
zł3.90
24h
Available quantity: 10
Available
Other products in the same category (16)
Soldering station 60W, temperature control in the range of 200°C to 500°C. WEP 926
Unavailable
zł57.00
1 weeks
No product available!
A digital flask soldering station with a continuously adjustable temperature in the range of 200.40 ° C. It is equipped with a LED display.
zł130.58
1 weeks
No product available!
2 in 1 soldering station: hotair (100,500 in. C) and soldering iron (100.,500 in. C). Temperatures are displayed on LED displays
zł365.00
24h
Available quantity: 1
Available
Soldering station 5 in 1: hotair (100-480 deg. C), soldering tip 60W, service power supply 0-15V / 1A, RF signal tester and voltage meter. Included, among others set of nozzles and gripper for integrated circuits
zł509.58
24h
Available quantity: 1
Available
Soldering station 2 in 1: hotair 100..480 st. C, soldering iron 75W 200..480 st. C. The station has a built-in PID control, settings are displayed on the LCD display
zł742.90
1 weeks
No product available!
Soldering station with a ceramic heating element with a capacity of 45W, temperature 200.40 ° C
zł112.00
24h
Available quantity: 1
Available
WEP 937D + soldering station with smoothly adjustable temperature in the range from 200 ° C to 480 ° C, temperature sensor and LED display. WEP 937D +
zł175.78
24h
Available quantity: 1
Available
soldering iron WEP 992DA + is a hot air soldering station and a soldering iron. It is equipped with a PID microprocessor, used for soldering and desoldering electronic components, shrinking, welding plastics, heating. WEP 992DA + 3in1
zł1,159.73
24h
Available quantity: 2
Available
75W soldering station, temperature 200..480 degrees C.
zł173.84
1 weeks
No product available!
WEP 938D + double soldering iron with a special flask stand, temperature range 100-480C, LCD display.
zł460.78
24h
Available quantity: 2
Available
Soldering station with a soldering iron and thermocouple. Device equipped with memory of 3 settings / profiles. The device facilitates disassembly of SMD and DIL elements
zł461.25
1 weeks
No product available!
Hotair 100..480 st. C soldering station with 75W flask soldering iron. Memory of three settings / profiles. Settings are displayed on the LCD display
zł742.98
24h
Available quantity: 1
Available
Hotair soldering station 100..480 deg. C, soldering tip 75W 200..480 deg. C. Settings are displayed on LED displays
zł356.70
1 weeks
No product available!
Station with two separate panels for a 75W (200-480 deg. C) soldering gun and hotair (100-480 deg. C).
zł381.95
24h
Available quantity: 1
Available
Soldering station with a soldering iron (100 ° C ... 480 ° C) and a soldering iron with a power of 75W (200 ° C ... 480 ° C). It has 4 LED displays, a 30V 5A service power supply, and a set of 4 nozzles
zł808.29
24h
Available quantity: 1
Available
Soldering iron with smooth regulation of digitally controlled air discharge, with temperature regulation in the range of 100 ° C to 500 ° C
zł214.89
24h
Available quantity: 1
Available
The WEP 952D+ soldering station is equipped with a 640 W hotair , 60 W tip, and a compressor. It combines simple operation and a very long life, it is perfectly suited to work in small services, homes, workshops.WEP 952D+