Category: STARTER KITS, PROGRAMMERS, MODULES

Module with a SI1151 light sensor that can detect waves with a wide range of wavelengths: visible and infrared light. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020089

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900

M5Stack series development kit equipped with ESP32-C3. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K122

Starter kit with a microcontroller from the Kinetis KL46Z family (Cortex-M0 +), integrated with the OpenSDA programmer-debugger, capacitive touch slider, LED, MEMS 3D accelerometer and 4-digit LCD. NXP FRDM-KL46Z

Evaluation kit with an i.MX 8M Nano quad-core processor, 2GB DDR4 RAM and 16GB eMMC 5.0/5.1 memory. Equipped with 802.11a/b/g/n/ac Wi-Fi module and BT4.1, MIPI-CSI and MIPI-DSI connector, audio Jack 3.5 mm, USB 3.0 and Ethernet. NXP NXP8MNANOD4-EVK

Standard 20-pin 0.1 male connector to provide electrical isolation, Segger

The largest starter set for working with Raspberry Pi computers, rich in modules and assembly lines, compatible with Linux and Windows 10 IoT systems, is CE-certified. Seeedstudio 103010002

Module with light intensity sensor TSL2591. Equipped with STEMMA QT connector with I2C interface. Adafruit 1980

A digital temperature and humidity sensor module based on the SHT41 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5776

Module with a 16-channel GPIO expander with the ability to control LEDs. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4886

This 32-bit RISC-V development board, running at up to 160 MHz, is designed for AIoT and human-computer interface applications. Featuring a 1.43-inch, 466x466-pixel AMOLED display and an FT6146 touch controller, it delivers detailed graphics and interactive experiences. The board features Wi-Fi 6, Bluetooth 5, and Zigbee/Thread connectivity, dual digital microphones, audio playback and recording, and the ability to connect a lithium battery or power via USB-C. ESP32-C6-Touch-AMOLED-1.43

ToF VL53L0X distance sensor module with a range of 3 to 200 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020532

RA4M1-Zero-M is a compact development board based on the RA4M1 microcontroller, equipped with a USB Type-C connector, a range of peripheral interfaces, and software security features. Designed to work with the Arduino IDE and SMT environment, it is suitable for projects requiring small dimensions and advanced functionality.

The Pen Lifter pen holder is a set dedicated to the :MOVE Motor for BBC micro:bit. Thanks to the mounted servo, the holder allows you to raise and lower the pen, which can be controlled using a code. Kitronik 56118

Module with 4 Qwiic connectors for Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Communication via the I2C interface. SparkFun DEV-17156

The magic:bit expansion module is designed to work with the micro:bit learning board. It can control servos, DC motors, stepper motors, has four RGB LEDs, an IR receiver and a buzzer

E-Paper ESP8266 Driver Board is a universal driver board for e-Paper displays. The board is based on the WiFi ESP8266 module. e-Paper ESP8266 Driver Board

ATECC608A cryptographic chip module. Enables adding strong security to an IoT node, edge device or embedded system. Adafruit 4314

NUCLEO starter kit featuring an STM32U385RG microcontroller (1 MB Flash, Cortex-M33), a built-in ST-Link/V3 programmer-debugger, and Arduino-compatible connectors. STMicroelectronics NUCLEO-U385RG-Q