Category: STARTER KITS, PROGRAMMERS, MODULES

Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039

Module with LM386 audio amplifier and loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020001

Module with an active buzzer. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 107020000

M5Stack series development kit equipped with ESP32 chip. It has a built-in microphone and is dedicated to applications that require speech recognition. M5Stack K117

Ethernet MQTT communication module designed for M5Stack sets. It communicates via the UART interface using AT commands. M5Stack U129

Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472

Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049

LPS28DFW absolute pressure sensor module. The chip features a wide measurement range of 260 to 1260 hPa or 260 to 4060 hPa and a high accuracy of 0.5 hPa. It communicates via an I2C interface. SparkFun SEN-21221

The module with the tilt sensor, the sensor output is a digital signal. The module has a connector in accordance with the Grove standard. Seeed studio 101020025

A small module with a PIR motion sensor. It allows detecting movement within a maximum range of 6 meters (default up to 3 meters). The measuring angle is 120 degrees. The module has a connector in accordance with the Grove standard. Seeed Studio 101020020

Adafruit Feather M0 Express - Designed for CircuitPython is a development board with a 32-bit ATSAMD21G18 microcontroller based on the Cortex-M0 core. The board works with CircuitPython, which allows you to program the MicroPython language. Adafruit 3403

ESP32-S3-Touch-LCD-4 is a versatile development board featuring a 4-inch touchscreen and the ESP32-S3 microcontroller, offering high processing power, wireless communication support, and a wide range of interfaces. The touch panel, LVGL-based GUI, multiple connectors, and support for various power sources make it an excellent solution for interactive and control applications in embedded systems and automation.

Module with DHT20 sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80 ℃. Seeed Studio 101020932

Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Adafruit 5398

Controller with 5 m RGB LED strip (10 LEDs per meter). The LEDs are mounted on a flexible white PCB. Communication is via the Grove interface. Seeed Studio 104020005

Gravity: Analog Signal Isolator is a module that allows to isolate sensors in the system and eliminate mutual interference of sensors powered by 5V. DFRobot DFR0504

Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006

Qwiic Cable - 500mm

ESP32-S2-DevKitC-1-N8R2 is an evaluation board designed for developing IoT applications using 2.4 GHz Wi-Fi. It features a high-performance microcontroller, large Flash and PSRAM memory, and a wide range of communication interfaces. With an integrated antenna, micro USB connector, and full access to GPIOs, it serves as a versatile tool for embedded system designers, automation engineers, and electronics enthusiasts.