Category: STARTER KITS, PROGRAMMERS, MODULES

An expansion board designed for MicroMod main modules. It is equipped with a Qwiic connector and one place for attaching functional modules. SparkFun DEV-18575

Module with a pulse sensor and the level of SpO2 (oxygen saturation level). It is based on the MAX30102 chip and communicates via the I2C or UART interface (Gravity connector). DFRobot SEN0518

Compact development kit from the M5Stick series equipped with ESP32 Pico and display and MLX90640 matrix. It will work well in projects related to IoT or as a STEM educational tool, e.g. as a small thermal imaging camera. M5 Stack K126

Ring light with 16 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-16

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19218

4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210

Development board with i.MX RT1176 dual-core microcontroller, Coral Edge TPU, camera and microphone. Designed for artificial intelligence applications using machine learning for image and speech processing. Coral G650-07968-01

Development kit with ESP32-S3 module. It is equipped with a dual-core Xtensa LX7 processor and Wi-Fi communication. It has a built-in 2-inch IPS capacitive touchscreen and numerous sensors, including a 30 MP GC0308 camera with proximity sensor, a 6-axis BMI270 position sensor and a BMM150 magnetometer. M5stack K128

The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano

Intermediate module of the communication system based on QwiicBus. It allows you to extend the range of the I2C bus. SparkFun COM-18000

Module with a button and yellow LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-Y

OLED display with a diagonal of 1.3" and a resolution of 128x64 pixels. Designed for use with Feather series plates. Adafruit 4650

Module with a button and blue LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-B

Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250

UART-RS485 converter module based on the TD (H) 541S485H chip. Equipped with power isolation and TVS. DFRobot DFR0845

WiFi module dedicated to Coral Dev Board Micro. It uses the Murata LBEE5HY1MW chip and connects to the base board via B2B connectors. Coral G650-07974-01

A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Gravity connectors and communicate via a digital interface. DFRobot TEL0140-1

PmodRS232 - Serial converter & interface

Ring light with 12 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-12

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter and Li-Ion battery. Totem TE-X4-KIT3