Module with a temperature and humidity sensor based on the SHT31-D system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 2857

This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight. Adafruit 2900

The RoboClaw motor controller can control a pair of brushed DC motors using USB serial, TTL serial, RC or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can supply a continuous 7.5 A per channel (15 A peak). Pololu 3284

Set (5 pieces) of wires for attaching modeling servos with the Grove system. With one wire you can connect 2 servos to one Grove slot. Seeed studio 110990057

A set with a vibration generator designed to transfer sounds through the human skeleton to the auditory center. DFRobot KIT0126

This module for the Pimoroni Yukon system allows for simultaneous control of four servos. It features a stabilized power supply with adjustable voltage of 5V, 6V, or 7.4V and a TPS54A24 step-down converter, supporting up to 5A continuous and 10A peak current. The module has built-in temperature sensors and a power status signal for increased safety. Pimoroni PIM696

Gamepad module (game controller) with joystick and buttons. Designed for Feather tiles. Adafruit 3632

An H-bridge driver that provides bidirectional control of a high-power DC motor with a voltage range of 5-60 V and a continuous current of up to 11 A. The module supports PWM signals up to 100 kHz, features a current measurement (CS) output based on the ACS711 sensor, and features reverse polarity and short-circuit protection. It is compatible with both 3.3 V and 5 V logic, enabling easy integration with popular microcontroller platforms. Ideal for robotics, automation, and DIY projects requiring high performance and reliability. Pololu 2993

This module supports four servos with direct power supply ranging from 5-17V, allowing for the construction of high-power designs. The module features standard servo connectors and two analog inputs that can be used to interface with sensors or servos with feedback. Pimoroni PIM695

This compact Bluetooth AUX adapter with USB-C enables wireless audio streaming to traditional audio equipment, transforming any system into a modern wireless solution.

The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based latching power control, where one push turns on power and another push turns it off.

Module with 16 digital inputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8026ADAM

With an integrated ESP8266 WiFi controller this module is a one-stop shop for almost any Internet-connected project. Firmware can be developed in Arduino and uploaded over a simple, serial interface. WRL-13711

This compact module allows for convenient control of servos communicating via UART in half-duplex or full-duplex mode, making it suitable for a variety of robotic projects. Equipped with Molex connectors and additional pins, it allows for easy integration of popular servos, such as the LX-16A, as well as models from other manufacturers. The module offers high-current power output, ensuring stable operation of complex systems with multiple servos. Pimoroni PIM697

Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007

An IMU module that adds a full 9-axis sensor suite to Feather boards for motion and orientation measurement. It combines an accelerometer, gyroscope, and magnetometer, providing stable and accurate data ideal for robotics, stabilization, wearables, and 3D motion analysis. The module communicates via I2C and features a STEMMA QT port for easy integration and solderless connection of additional sensors. Adafruit 4565

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 6 V and a maximum input of up to 2 A. Pololu 4942

The STN 128×64 display with RA8808 controller and COG technology provides high readability and easy integration with systems based on the KS0108A. Support for the SPI interface and extended temperature range allow its use in mobile, industrial, and outdoor devices.