Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V

Internal PCIe x1 network card with 1 Gb/s RJ45 port, Realtek RTL8111C chipset, Flow Control support, low-profile bracket included. Lanberg PCE‑1GB‑201

Internal PCIe x1 network card with RJ45 1 Gb/s port, Broadcom BCM5751 chipset, Wake-on-LAN support, low-profile bracket. Lanberg PCE‑1GB‑001

Controller of three-phase BLDC motors based on Trinamic\'s TMC6300 chip. Allows motion control of drives with a current consumption of up to 2 A. SparkFun ROB-21220

RGB 5x5 (25 LEDs) matrix LED display module designed for QT Py and Xiao boards. It uses SK6805 addressable LEDs and communicates via a single-wire interface. Adafruit 5646

Dual motor controller allowing two DC motors to be driven with voltages from 4.5 to 13.5V and a continuous current of 1.2 A per channel. SparkFun ROB-14450

Portable 8" monitor with touch panel. Equipped with HDMI for video display and USB Type C for touchscreen operation. It offers 2K resolution (1536x2048 px). Waveshare 8inch 1536x2048 LCD (EU)

4-channel 4K video splitter with HDMI connectors. Allows multiple devices to share a single HDMI source for high resolution and smooth operation. Waveshare HDMI-SPLITTER-1IN-4OUT

Camera module with a two-degree-of-freedom (2 DoF) platform. It uses the OV5647 sensor with a resolution of 5 MP and provides a 360° camera rotation angle thanks to the built-in servo. It is dedicated to the Raspberry Pi 4B and Raspberry Pi 5 minicomputers. 2-Axis Pan-Tilt Camera Module (EU)

The camera module equipped with a modern Sony IMX708 sensor with a resolution of 11.9 MP, offers high quality photos and videos in Full HD resolution, ideally suited to demanding lighting conditions thanks to the HDR mode. With an advanced autofocus system, built-in IR-cut filter and full compatibility with the libcamera and Picamera2 libraries, the module is a versatile solution for applications in nature photography, monitoring and AI projects. ArduCAM B0306

Module with digital barometer BMP581. It enables pressure measurement in the range from 300 to 1250 hPa with an accuracy of ± 5 Pa and communicates via I2C. SparkFun SEN-20171

This 11.9MP Sony IMX708 sensor module offers HD recording and advanced PDAF and CDAF autofocus systems. Equipped with a 102° wide-angle lens and an IR-cut filter, it\'s ideal for surveillance, AI projects, and nature photography. The camera is fully compatible with the Raspberry Pi, supported by libcamera and Picamera2, and the included enclosure makes it easy to integrate into DIY projects. ArduCAM B0307

Stereo audio amplifier with Bluetooth 4.2 communication. It can be powered with the voltage from 19 to 24 V and has two outputs with a power of 80 W

A computer performance monitor that allows you to display CPU, GPU, RAM and disk usage. It uses a 5" display with a resolution of 800x480 pixels. It has a built-in microphone and an audio spectrum display function. It is connected to the computer via a USB port. Waveshare 5inch USB Monitor W

A compact development board that uses the ESP32-PICO-MINI chip. It provides wireless communication via Bluetooth and serves as an easy-to-configure UART converter. It has a built-in PCB antenna. SparkFun WRL-23287

A power module for the Pimoroni Yukon platform that allows independent control of two high-current outputs within a voltage range of 5 to 17 V. Built-in diodes and chokes enable excellent handling of inductive loads such as pumps, fans, and solenoids. Each channel can also operate in PWM mode, allowing for smooth power regulation in slow-response devices. The module supports a total current of up to 15 A and includes temperature sensors and a "power good" signal. Pimoroni PIM692

Pin housing, 2x5, 2.54mm, for wire, RoHS. Set of 10 pieces

AS7331 UV light sensor module. It allows you to measure UV radiation on three channels: UVA (320-400nm), UVB (280-320nm) and UVC (200-280nm). Communication with AS7331 takes place via the I2C interface and the Qwiic connector. SparkFun SEN-23518

AS7331 UV light sensor module. It allows you to measure UV radiation on three channels: UVA (320-400nm), UVB (280-320nm) and UVC (200-280nm). Communication with AS7331 takes place via the I2C interface and the Qwiic connector. SparkFun SEN-23517

Base board for prototyping IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT and Digi XBee RR modules. It gives access to the full functionality of the XBee module pins, including two USB Type-C connectors for UART communication and firmware updates, a Qwiic connector for I2C-compatible sensors and peripherals. SparkFun WRL-21636