Module with addressed RGB diode WS2812B designed for Wemos D1 Mini boards

A module with a two-channel DC motor driver based on the TB6612FNG system. Designed for Wemos D1 Mini

MP2159GJ, Step-Down Converter, 1A, 6V, 1.5MHz, 17μA IQ, TSOT23-8

Power cable with CEE 7/16 to IEC 320 C7 connectors for laptops and RTV devices with a radio socket. Lanberg CA-C7CA-10CC-0018-BK

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5250

El-wire is a thin and flexible wire which shines under high voltage. The cord is green, has a diameter of 3mm and a length of 5 meters

A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5232

A small DC - DC boost module that converts a 0.9..5V power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small electronic devices that use a 5v input. It integrates a PFM DC-DC boost control chip. FIT0471

This compact Bluetooth AUX adapter with USB-C enables wireless audio streaming to traditional audio equipment, transforming any system into a modern wireless solution.

C-Mount lens and C-CS adapter. 2.8-12 mm focal length variable, FoV 125° (H), 43° (H), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN049

El-wire is a thin and flexible wire which shines under high voltage. The cord is blue, has a diameter of 3mm and a length of 5 meters

HDMI-USB adapter dedicated to video capture and transfer to devices with USB type A connector. Waveshare HDMI to USB Adapter

Single-Chip Embedded 80C51 with Integral V.22bis Modem, CML Microcircuits, LQFP100, RoHS

El-wire is a thin and flexible wire which shines under high voltage. The cable is red, has a diameter of 3mm and a length of 5 meters

The DC BUCK Adapter (7.2V) is a compact switching regulator designed to power servos that communicate via serial bus. With a wide input voltage range and easy installation, the module is ideal for robotic systems and applications requiring stable 7.2 V power from various energy sources.

2.4 "TFT LCD display module with touch panel with SD card slot. Resolution 240x320. Based on the ILI9341 controller. Powered by 3.3V or 5V.

An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335

Module with three voltage analog outputs ranging from 0 to 10 V. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3079ADAM

The Lanberg USB 2.0 cable in black color ensures a stable and fast connection between a computer and printers, scanners, and other peripheral devices. With a ferrite core, it minimizes interference, while its high-quality construction guarantees uninterrupted data transfer and durability. CA-USBA-15CU-0030-BK