Module with GNSS MAX-M10S receiver. It can receive signals from GPS, GLONASS, BeiDou and Galileo constellations. It has an SMA connector for connecting an external antenna and a Qwiic socket. SparkFun GPS-18037

Wireless switch operating at 433 MHz frequency. It does not require a power supply. DFRobot TEL0146

RGB LED strip driver module dedicated to Arduino boards. It can work with tapes with a supply voltage of up to 12 V and a current consumption of up to 3 A. DFRobot DFR0274

Wireless communication module for IoT devices combining a dual-core ESP32-S3R8 microcontroller with an SX1262 LoRa transceiver; supports LoRaWAN in EU868 and US915 bands, 2.4 GHz WiFi and Bluetooth LE 5.0; 16 MB Flash and 8 MB PSRAM; LoRa output power up to 20.9 dBm; sensitivity down to -137 dBm; IPEX antenna connector; 3.0-3.6 V supply voltage; 38-pin SMT package; dimensions 21.6 x 16.5 x 3.3 mm. Seeed Studio 100020327

Portable LoRa device based on the nRF52840 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 1.54" E-Paper display, an L76K GNSS positioning module, and a BME280 environmental sensor in a compact ABS enclosure with a built-in 850 mAh battery. Factory-installed Meshtastic firmware allows immediate deployment in mesh networks without manually flashing the software. The kit includes an 868 MHz LoRa antenna and a USB Type-C cable. The device is designed for autonomous mesh nodes, long-range communication, GPS positioning, and mobile IoT applications. LILYGO TTGO T-Echo 868 MHz BME280 Meshtastic Firmware

The SEQURE E130 G2 4-in-1 ESC provides high-current motor control for demanding FPV racing and freestyle drones powered by 4–8S battery packs. Support for modern communication protocols, ESC telemetry, and AM32 or BLHeli_32 firmware makes it suitable for high-performance multirotor builds. SEQURE E130 G2

The Arduino expansion board is dedicated to applications that use NB-IoT communication. Thanks to the GNSS (Global Navigation Satellite System) module, it supports GPS, GLONASS, Galileo, QZSS and BeiDou navigation systems. The module is supplied with the voltage from 7 to 12 V. DFRobot DFR0572

Module with IPS LCD display with a diagonal of 1.8" and a resolution of 128x160 px. Equipped with a microSD card reader. DFRobot DFR0928

Compact satellite positioning module designed for FPV drones, fixed-wing models, and other RC platforms. It supports GPS, BDS, and Galileo constellations as well as SBAS and QZSS augmentation systems, providing an output rate of up to 10 Hz and horizontal positioning accuracy of 1.5 m in open-sky conditions. SEQURE M10-182

High-current brushless electronic speed controller designed for drones, aircraft, boats and RC vehicles. It supports 2–8S LiPo batteries, provides up to 120 A continuous current and 150 A maximum current, while the adjustable 10 A BEC can directly power receivers, servos and other onboard electronics. SEQURE 28120 (AM32) + BEC 10A

Compact satellite positioning module designed for FPV drones, fixed-wing models, and other RC applications. It supports GPS, BDS, and Galileo satellite systems together with SBAS and QZSS augmentation systems, providing an output rate of up to 10 Hz and horizontal positioning accuracy of 1.5 m in open-sky conditions. SEQURE M10-252

Compact satellite positioning module designed for FPV drones, fixed-wing models, and other RC platforms. It supports GPS, GLONASS, BDS, Galileo, SBAS, and QZSS, providing an output rate of up to 10 Hz, horizontal positioning accuracy of 1.5 m, and compact dimensions of 12 × 16 × 4.5 mm. SEQURE M10-12

High-current brushless electronic speed controller designed for demanding RC applications, including drones, aircraft, boats, and RC vehicles. It supports 5–14S LiPo batteries, provides up to 200 A continuous current, and uses AM32 firmware for flexible motor control. The metal heatsink supports effective heat dissipation under high loads. SEQURE 14200

High-current brushless electronic speed controller designed for demanding RC applications, including drones, aircraft, helicopters, boats, and RC vehicles. It supports 5–14S LiPo batteries, provides up to 200 A continuous current, and features an adjustable 3 A BEC. SEQURE 14200M

High-current brushless electronic speed controller designed for demanding RC applications, including drones, aircraft, helicopters, boats and RC vehicles. It supports 5–14S LiPo batteries, provides up to 200 A continuous current and features a high-power adjustable BEC together with active fan cooling. SEQURE 14200 Pro Brushless ESC AM32

High-current waterproof electronic speed controller designed for brushless motors in demanding RC and marine applications. It supports 5–14S LiPo batteries, provides up to 200 A continuous current and features an IP68-rated enclosure together with an integrated 5.2 V / 3 A BEC. SEQURE WP14200 B

Waterproof ESC controller designed for high-power brushless motors used in demanding RC and marine applications. It supports 5–14S LiPo batteries, delivers up to 200 A continuous current and features an IP68-rated housing together with an integrated 5.2 V / 3 A BEC. SEQURE WP14200 C

DC motor driver that allows you to control the movement of three drives using the I2C interface. Board with soldered connectors. Pololu 5033