Ethernet module dedicated to Coral Dev Board Micro. It supports power over Ethernet (PoE) technology and connects to the base board via B2B connectors. Coral G650-07975-01

WRL-12823

Low power Wi-Fi module integrating wireless LAN and Cortex-M4 STM32F411CE microcontroller. It has 2 MB external flash memory, 512 KB bytes embedded flash memory, 128 KB RAM and peripherals. Seeed Studio 113990108

The USB to 2.5G Ethernet converter is a compact and efficient tool that extends network functionality to devices lacking an RJ45 interface. With broad system compatibility and driverless operation, it is well-suited for mobile setups, single-board computers, embedded systems, and upgrading older hardware to higher network speeds.

A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard. Seeed Studio 110990035

4G LTE router ensuring a stable and fast connection to the Internet. It has 4 LAN ports, one WAN and an RS232/RS485 port. Supports Modbus RTU to TCP protocol. It offers mounting on a DIN rail and a metal housing with IP30 protection class. USR-G809-E

Communication module with R800C chip designed for Raspberry Pi minicomputers. It adds support for GSM/GPRS (2G) networks. Waveshare SIM800C GSM/GPRS HAT

Bluetooth 4.0 module based on the CSR8635 chip designed for Bluetooth audio applications. The module has a built-in antenna and pins for edge connectors.

WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a built-in chip antenna and 2.54 mm pitch connectors, which greatly facilitate prototyping. Tibbo WA2000C

A compact IoT device that combines an ESP32S3 processor with a Wio-SX1262 LoRa module, enabling communication distances of up to 5 km in the 868–915 MHz band. With support for LoRaWAN, 2.4 GHz Wi-Fi, Bluetooth 5.0, and expansion options for GNSS and sensors, it is a versatile solution for IoT gateways and nodes. Seeed Studio 113110064

WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a u.FL connector dedicated to connecting an external antenna and a connector with a 2.54 mm pitch, which greatly facilitates prototyping. Tibbo WA2000U

Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2

Netgear GS108E is an 8-port Gigabit Ethernet switch with QoS, VLAN, and IGMP Snooping features. Silent operation, durable design, and easy setup. Netgear GS108E

Module with high power IR LED transmitter. It has a built-in N-channel FET driver and can emit an IR signal with a range of up to 10 m. Adafruit 5639

Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23011

UART-Ethernet converter for bi-directional communication between devices equipped with UART TTL ports and Ethernet. It is visible in the system as a virtual COM port and configured via a web page or via AT commands. USR-K5

LoRa module operating at 433 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23233

UART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website. USR-K6

This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless programming, debugging, and control using standard Arduino software. Pololu 2513

WiFi module for FriendlyELEC computers