Category: KAmod (Kamami) peripheral modules
KAmod Peripheral Modules (Kamami)
Offering versatile and high-quality solutions for engineers, students, and hobbyists in the field of electronics. These modules enable easy expansion of project functionalities and rapid prototyping. At Kamami, you will find a wide selection of KAmod peripheral modules that meet your needs. Our range includes KAmodWS2812-1 - a module with a serially controlled RGB WS2812 LED, KAmodLVC - an 8-bit bidirectional level shifter ST2378, KAmodMC3635 - a module with a three-axis accelerometer, KAmodDS18B20 - a module with a DS18B20 temperature sensor from Dallas, KAmodPCAL6408 - an 8-channel I2C expander module, and a connection cable for KAmod modules, 6-wire, 30cm (yellow).
There are 57 products.
KAmodRPi-Pmod-HAT is a HAT for Raspberry Pi 5/4B/3B+/3B/2B/B+ minicomputers that allows use of the communication interfaces available on the 40-pin minicomputer connector
KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q
KAmodPCA9533 is a module with LED driver from NXP. The module allows you to control the brightness of 4 LEDs using programmable PWM signals (with a frequency from 0.591 Hz to 152 Hz). I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
KAmodHTS221 is a module that allows the measurement of humidity and temperature, and thanks to the built-in stabilizer and translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V
KAmodLPS25HB is a module that allows the measurement of atmospheric pressure in the range of 260-1260hPa with a resolution of 0.01hPa, and thanks to the embedded regulator and voltage translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V.
KAmodMPL3115A2 is a module with an atmospheric pressure sensor MPL3115A2 from NXP. Sensor allows to make a measurement in the range of 200...1100hPa (20...110kPa). Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMPL3115A2
KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
A 30 cm long connecting cable (6 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF06S connector that KAmod modules are equipped with. cabhu06-30
Module with digital thermal sensor, thermostat and I2C interface
KAmodDIGIpot is a miniature digital potentiometer module. It allows, by means of two PU / PD inputs, to change the resistance value between the outputs A, W, B (compatible with the outputs of the analog potentiometer), using buttons or outputs of the microcontroller. Adjustment in 32 steps, value 10k.
Module with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.
KAmodMIC_ELECTRET is a module with microphone KPCM6B type. Thanks to embedded amplifier with hundredfold amplification of signal, output voltage can be measurement in microcontroller with using e.g. ADC converter.
KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
The KAmodRS module is a reliable RS232-UART converter supporting voltages from 3 V to 5.5 V and enabling data transmission at a speed of up to 250 kbit/s. Thanks to the use of the MAX3232 chip, the module is ideal for a wide range of electronic and microcontroller applications requiring stable and effective serial communication
Four relay output module for Raspberry Pi 4B, Pi 3B+ Pi3B, Pi2, Pi+, Pi minicomputers.
Relay output module for Raspberry Pi 4B, Pi 3B+ Pi3B, Pi2, Pi+, Pi minicomputers.
KAmodWS2812-1 - Module with Serially Controlled RGB WS2812 LED
With the ability for serial control, KAmodWS2812-1 allows for easy management of multiple WS2812 RGB LEDs. This is an ideal solution for creating impressive lighting projects that can be used in decorations, status indicators, and interactive installations.
KAmodLVC - 8-bit Bidirectional Level Shifter ST2378
Allowing seamless signal conversion between different voltage levels, KAmodLVC is essential in projects where communication between devices with different voltages is crucial. This 8-bit bidirectional level shifter ST2378 is applicable in numerous electronic applications.
KAmodMC3635 - Module with Three-Axis Accelerometer
Equipped with a three-axis accelerometer, KAmodMC3635 offers precise acceleration measurements in three axes. This is the perfect tool for projects requiring motion detection, stabilization, and position control. Its compact size and ease of integration make it an excellent choice for any electronics enthusiast.
KAmodDS18B20 - Module with DS18B20 Temperature Sensor from Dallas
Featuring a DS18B20 temperature sensor from Dallas, the KAmodDS18B20 module is a reliable tool for precise temperature measurement. This sensor offers high accuracy and a wide measurement range, making it ideal for environmental monitoring systems, home automation, and other projects requiring accurate temperature measurement.
KAmodPCAL6408 - 8-Channel I2C Expander Module
Allowing easy expansion of the number of available digital pins in a project, KAmodPCAL6408 is an 8-channel I2C expander that enhances the functionality and flexibility of projects. By utilizing the I2C interface, this module is simple to integrate with microcontrollers, making it an ideal choice for control and automation systems.
Connection Cable for KAmod Modules, 6-Wire, 30cm (Yellow)
The 6-wire, 30cm (yellow) connection cable for KAmod modules is an essential accessory for connecting modules in electronic projects. Its high-quality construction ensures reliable connections and ease of use, making it ideal for prototyping applications and finished installations.
Our Store Offer
Kamami offers a wide range of KAmod peripheral modules that meet the needs of both beginners and advanced users. Our selection includes digital and analog modules that enable easy expansion of any project's functionality. All our products come from reputable manufacturers, ensuring their high quality and reliability. With Kamami's extensive offer, every electronics enthusiast will find something for themselves, from simple educational modules to advanced tools for professional applications. We encourage you to explore our offer and choose the KAmod peripheral modules that best meet your needs.