The 3D TOF camera is a module that consists of the BL702 system and the Juyou 100x100 TOF sensor. It is a 3D sensor that allows you to measure distances up to 1.5 meters. It is equipped with a 1.14-inch LCD screen that allows real-time viewing of depth maps along with color maps. DFRobot SEN0581

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals. Pololu 5411

Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332

LHT52 Indoor LoRaWAN Air Temperature and Humidity Sensor US915 Seeed Studio 101990984 is a wireless air temperature and humidity sensor designed for smart home systems, offices, and industrial applications. Thanks to battery power, data logging, and LoRaWAN compatibility, it is suitable for environmental monitoring, building automation, and precision agriculture.

Compact module with three I2C sensors, enabling measurement of temperature, humidity, pressure, light, proximity and motion. It offers two Qw/ST connectors, so you can quickly connect it to Raspberry Pi, Pico or other microcontrollers. Ideal for IoT applications, home automation and environmental analysis in mobile or stationary projects. Pimoroni PIM745

A passive infrared motion sensor designed for Tiny FX projects and interactive installations. It detects motion within a 3-5m range and generates a simple 3.3V digital signal, ideal for triggering lighting effects and animations. Adjustable sensitivity, a wide viewing angle, and very low current draw make it ideal for battery-powered projects. The module is completely ready to use and can be connected without soldering using a JST-SH connector. Pimoroni PIM749

Module with a VOC sensor (volatile organic compounds) made in MEMS technology. It allows gas detection in the range of 5 to 500 ppm and has an analog output. DFRobot SEN0566

Module with INA237 sensor designed for power monitoring. Allows measurement of voltages up to 85 VDC and current up to 10 A. Uses a 16-bit ADC for precise and accurate readings available via the I2C interface. Adafruit 6340

Module with nitrogen dioxide sensor made in MEMS technology. It allows gas detection in the range of 0.1 to 10 ppm and has an analog output. DFRobot SEN0574

Crowtail – BME280 Atmospheric Sensor 2.0 is a multifunctional environmental sensor measuring temperature, humidity, and pressure, with an I2C interface and low power consumption. It is used in weather applications, home automation, and mobile systems.

A compact line-tracing board designed for Raspberry Pi Pico, BBC micro:bit, and Arduino projects. Equipped with three phototransistors, it generates an analog output voltage proportional to the substrate\'s color, enabling precise control of autonomous vehicles. The board is solderless and ready to use, with a standard 2.54mm connector for easy integration with prototype breadboards. Kitronik 5337

LiDAR CS20 3D TOF equipped with a ToF image sensor with a resolution of 640 x 480 pixels. It uses ToF technology to record three-dimensional information about objects and space. It can accurately measure distances up to 5 m. DFRobot SEN0579

Crowtail – Collision Sensor 2.0 is a mechanical collision sensor with a digital output, detecting impacts through pressure on a microswitch. Used in mobile robotics for detecting contact with obstacles.

The Zeenko near-field probe set based on a 4-layer PCB enables precise detection of EMI sources in electronic circuits. When used with spectrum analyzers such as tinySA ULTRA, it provides effective electromagnetic diagnostics without the need for external amplifiers. An ideal solution for analyzing and eliminating interference in electronic systems.

Color sensor equipped with the OPT4048 sensor from Texas Instruments. It allows you to determine the characteristics of ambient light by measuring parameters such as light intensity, color in the CIE XY, LUV coordinate systems, as well as color temperature. The module is equipped with Qwiic connectors. SparkFun SEN-22638

Module with ToF sensor VL53L7CX with an output in the form of a matrix of 64 pixels (8x8) and a range of up to 3.5 m. It communicates via the I2C interface. Pololu 3418

A high-precision 12-bit magnetic encoder that provides accurate angle measurement from 0 to 360°. It supports I2C and PWM interfaces for easy integration with microcontrollers and control systems. Powered by 5V and featuring 1024-bit analog resolution, it\'s ideal for projects requiring smooth and stable operation. Makerbase MKS AS5600

The TLE5012B precision magnetic encoder with sensor offers angle measurement in the 0–360° range with a resolution of 4096 CPR. Its compact design and low current consumption of 14 mA make it ideal for projects requiring energy efficiency and reliability. It is compatible with motor control systems such as ODrive, as well as robotics and industrial applications. Makerbase MKS TLE5012B

A 24 GHz FMCW radar with Wi-Fi 802.11b/g/n and Bluetooth 5.0 BLE support, enabling precise detection of motion and human presence. Equipped with an integrated detection algorithm and a RISC processor with SPI, UART, I²C, PWM, and GPIO interfaces, it provides flexible configuration and reliable communication in IoT systems. With a wide operating temperature range (-40°C to +85°C), a built-in radar antenna, and WPA3 support, the module is ideal for smart homes, building automation, and security systems.

Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. Communicates via USB interface. Waveshare Thermal USB Camera