Miniature, analog servomechanism with dimensions 20.0mm × 8.3mm × 17.3mm and weight 4.4g, power supply 4.8 ... 6V, maximum torque 0.6kg / cm (with 6V power supply). Pololu 3420

A universal set of structural elements (plastic beams, plates, metal brackets and fasteners, and a set of screws and nuts). Parts are pre-cut to the most frequently used lengths. Totem TKM-MK1

Servo equipped with metal gear and analogue feedback. It is supplied with the voltage in the range from 4.8 to 7.2 V. DFRobot SER0044

These tall brackets offer an easy and  convenient mounting solution for mini plastic gearmotors.

Assembled miniature 15V power supply module. AVT1913 / 15 C

Miniature high-power motor from the Pololu MP series. 100: 1 gear motor,
the rotation speed of the shaft is 220 rpm, the torque is 1.5 kg * cm (0.15 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2381

These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes two M3 screws for securing the motor to the bracket. Each bracket also features seven mounting holes and twelve mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options.

This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2267

Motor with 20 mm diameter and 41 mm length, 25:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 570 RPM speed and 1.6 kg*cm maximum torque. Pololu 3462

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2

A set for building a mobile robot with a gripper controlled by a mobile application. TMK-DMNNG totem

Robot controller dedicated to Totem sets. It is equipped with Bluetooth communication, so it can be controlled using a smartphone. TMK-X3K totem

Mounted LED lamp responding to the clap: lamp-click. AVT788 C

Built for Sumo Robot fight, Sumo Bumper for MiniQ 2WD is a quick add-on that turns your miniQ into a sumo fighter. FIT0378

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

A set for building a 6-legged walking robot controlled by a mobile application. Totem TKR-LDB

A kit for building a four-wheeled platform controlled by a mobile application. TMK-4WDU totem

This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

The mountings allow the engine to be mounted on the Romi Chassis chassis. The motor is snap-fitted, which facilitates its quick assembly. The mountings are in yellow. Polol 3524

The mountings allow the engine to be mounted on the Romi Chassis chassis. The motor is snap-fitted, which facilitates its quick assembly. The fixings are in pink. Pololu 3521