Category: Main categories
Subcategories
There are 23386 products.
ARM Cortex-M3 CPU, 1MB Flash, 96kB RAM, USB, CAN, 5xUART, 2xI2C, 3xSPI, ADC, DAC, STM, LQFP100
RGB LED matrix display with a resolution of 64x32 (2048 LED). It has a HUB75 interface and can work with Raspberry Pi, Arduino or ESP32. Waveshare RGB-Matrix-P4-64x32
Camera adapter based on Raspberry RP2040, dedicated to TinyML development. is equipped with a 2.4-inch LCD screen, microphone, camera connectors and an IMU module. It allows you to take photos, use WiFi, SD card and USB mass storage. ArduCam B0432
USB 2.0 camera with microphone that offers a maximum resolution and frame rate of 2592(H)×1944(V)@30fps. Equipped with an autofocus lens, it ensures the creation of convenient and effective solutions. Thanks to Plug and Play support and the UVC protocol, the camera is compatible with various platforms and operating systems, such as Windows, Linux, Mac and Android ArduCAM B0441
Module with a 0.96" color OLED display with a resolution of 64x128 pixels. Communicates via the SPI interface. Waveshare 0.96inch RGB OLED Module
This encoders are designed for DFRobot 3PA and AWD Rovers. It can give you the rotation degree of the wheels. Encoder uses non-contact method to convert the angular displacement signals. Best fit with Micro DC Geared Motor. SEN0038
USB port isolator based on ADUM3160 chip. It has a built-in galvanically separated voltage converter and is powered from the USB port
Base board dedicated to Raspberry Pi CM4 modules. Equipped with a 2.8" IPS LCD display. Waveshare CM4-DISP-BASE-2.8A
100:1 Micro Metal Gearmotor with Extended Motor Shaft
Navy Blue TR PCTG filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy PCTG Navy Blue TR
Development board based on the u-blox NORA-W306 module, offering dual-band WiFi and Bluetooth Low Energy. Equipped with a microcontroller with two Arm Cortex-M33 and Cortex-M23 cores, ideal for battery-powered IoT projects. It offers USB Type-C, microSD, JST for LiPo batteries, and 20 GPIO pins, supports a variety of communication interfaces, and allows easy integration with the Qwiic system and programming via Arduino IDE. SparkFun WRL-21637
Gray PCTG filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy PCTG Gray
Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
LiPo battery monitor module based on the MAX17043 chip. Allows the voltage and state of charge of the battery to be measured. SparkFun TOL-20680
BMI270 3-axis accelerometer and gyroscope module. The chip is a low-power IMU optimised for wearables, providing precise acceleration measurement, angular velocity measurement and motion-triggered interrupt functions. Equipped with a Qwiic connector, it communicates via an I2C interface. SparkFun SEN-22398
Motion detection module featuring Panasonic\'s EKM series PIR sensor. The EKM series is optimised for detecting small movements and is ideal for detecting movement in a small area around the sensor. It offers digital output in 32 zones with a detection distance of 5 m and a detection area of 90° x 90°. SparkFun SEN-21999
Portable Tablet Oscilloscope with 8-inch LCD display and touch screen. It has two channels and is characterized by good measurement parameters: 200 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig STO2002
GPS module with SAM-M10Q GNSS receiver. The chip can receive data from all major positioning systems: GPS, GLONASS, Galileo, QZSS and BeiDou. It has derived UART and I2C interfaces. SparkFun GPS-21834
Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)