Category: Main categories

Qwiic adapter designed for micro:bit educational modules. Facilitates access to all pins that are led out on the connector with a pitch of 2.54 mm and the Qwiic connector. SparkFun BOB-16446

LED strip with COB diodes in blue. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20

LED strip with COB diodes in pink. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20

The Step-Up/Step-DownS7V8A Buck Voltage Regulator module with adjustable output voltage in range of 2.5-8V, input voltage range of 2.7-11.8V and a maximum output current of 0.5-1A. Pololu 2118

LED strip with COB diodes in pink. It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20

Module with 4-digit 7-segment display with red digits. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044

Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050

Lanberg\'s Cat.6 patch cord with a length of 10 meters ensures efficient data transmission up to 250 MHz thanks to F/UTP shielding and is made of copper-plated material (CCA). The green cable with a diameter of 5.7 mm is resistant to interference and confirmed by the Fluke test. Lanberg PCF6-10CC-1000-G

Module with a 3-axis magnetometer HMC5883L, which allows the measurement of the magnetic field in the range of ±8 Gauss. Communication via the I2C interface

Module with pressure and temperature sensor BMP280. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020192

Module with OLED 0.96" display with a resolution of 128x64 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104030008

Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039

Educational robot for learning programming based on the micro:bit module. Equipped with a blue protective case. DFRobot ROB0148-EN-LB

Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049

The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046

The touch sensor module (touch button) can be used as a replacement for traditional mechanical buttons. It operates based on the TTP223-B system, which measures the capacity of the metal field on the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020037

Expansion board based on the Wiznet W5200 Ethernet chip. It allows you to easily connect the Arduino to the Ethernet network. DFRobot DFR0272

LED strip with addressable RGB WS2813 diodes on a black PCB. It is powered by 5 V DC, has a length of 5 m and 60 LEDs/m. Protection degree IP67

LED strip with addressable RGB WS2813 diodes on a white PCB. It is powered by 5 V DC, has a length of 5 m and 30 LEDs/m. Protection degree IP67

Folding solar panel with an output voltage of 5 V and a current capacity of max. 1.5 A. It has the dimensions of 165x105x15 mm (folded) and a USB port