Category: Main categories

Industrial module based on the ESP32-S3 microcontroller, which supports WiFi, Bluetooth and RS485 interface. Equipped with 6 high-power relays (up to 10A at 250VAC/30VDC), it allows for safe control of various devices and integration with industrial sensors via the Modbus protocol. The module supports popular programming environments such as Arduino and MicroPython, making it ideal for AIoT and remote monitoring applications. Waveshare ESP32-S3-Relay-6CH

OLED display with a diagonal of 0.49" and a resolution of 64x32 pixels. Displays content in white. Uses the SSD1315 controller and communicates via the I2C bus. Waveshare 0.49inch OLED Module

Digital multimeter with 6000-count LCD display and analog bar graph, designed for measuring AC/DC voltage up to 600 V, current up to 10 A, resistance, capacitance, frequency, duty cycle, and temperature using a K-type probe. Measurement categories CAT III 300 V / CAT II 600 V. Kyoritsu KEW1011

Soldering tip YT-82495 type T12-ILS with built-in heater and precision tip for soldering small components. Compatible with stations YT-82461, YT-82462, and YT-82490, ideal for SMD assembly and tasks requiring high accuracy.

Soldering tip YT-82492 type T12-JL02 with a tip curved at a 30° angle, designed for precise soldering in tight spaces. Compatible with Yato stations YT-82461, YT-82462, and YT-82490, recommended for service and micromounting applications.

The 10.1-inch industrial HMI module, based on the Raspberry Pi 5 with a Broadcom BCM2712 processor (Cortex-A76, 2.4GHz), offers 4GB RAM and a 32GB SD card, providing performance for IoT applications. The device supports 2.4/5GHz Wi-Fi, Bluetooth 5.0, 4Kp60 video output on two screens via HDMI, and is designed to work in temperatures from -20℃ to 60℃, thanks to its robust housing and fanless design. Edatec ED-HMI3010-101C-0432

T12‑B2 type soldering tip with integrated heater and temperature sensor for precision electronic soldering work

The FT232RNL USB to UART converter provides stable serial communication and debugging of industrial equipment, supporting 3.3V and 5V voltages and hardware flow control. With power indicators, protection diodes, and compatibility with multiple operating systems, it offers reliable data transfers from 300 bps to 3 Mbps, as well as additional protections against faults and electrostatic discharge. Waveshare USB TO TTL (C)

Antistatic HDPE bottle with 100 ml capacity and stainless steel pump dispenser for precise application of alcohols and solvents

The 7-inch industrial HMI module, based on the Raspberry Pi 5 with a Broadcom BCM2712 processor (Cortex-A76, 2.4GHz), offers 4GB RAM and a 32GB SD card, providing performance for IoT applications. The device supports 2.4/5GHz Wi-Fi, Bluetooth 5.0, 4Kp60 video output on two screens via HDMI and is designed to work in temperatures from -20℃ to 60℃, thanks to its robust housing and fanless design. Edatec ED-HMI3010-070C-0432

The 7-inch industrial HMI module, based on the Raspberry Pi 5 with a Broadcom BCM2712 processor (Cortex-A76, 2.4GHz), offers 8GB RAM and a 32GB SD card, providing performance for IoT applications. The device supports 2.4/5GHz Wi-Fi, Bluetooth 5.0, 4Kp60 video output on two screens via HDMI, and is designed to work in temperatures from -20℃ to 60℃, thanks to its robust housing and fanless design. Edatec ED-HMI3010-070C-0832

Cordless rechargeable soldering iron powered via USB‑C, heats up to 450°C, equipped with a 4V 2500mAh battery, up to 45 min runtime. Neo Tools 19‑250

The Arduino Nano R4 is a compact board from the Nano family featuring a 32-bit Renesas RA4M1 microcontroller with a 48 MHz Arm Cortex-M4 core, delivering enhanced performance while maintaining 5 V logic compatibility and full integration with the existing Arduino ecosystem. The new version expands functionality with a CAN interface, a 12-bit DAC, an integrated operational amplifier, and a Qwiic connector for quick I²C module connectivity. Thanks to castellated pins and single-sided component assembly, the board is suitable for both rapid prototyping and production projects requiring integration into custom PCBs. Arduino ABX00143

5.79-inch black and white e-Paper module with a resolution of 792x272 px. With a wide viewing angle, this display works well in a variety of lighting conditions, providing readability comparable to traditional paper. Waveshare 5.79inch e-Paper Module

Base board with dual Ethernet interfaces for Raspberry Pi Compute Module 5, designed for integration with 4G and 5G cellular modems and for networking and industrial applications. Waveshare CM5-DUAL-ETH-4G/5G-BASE

A comprehensive development kit for creating mobile and energy-efficient LoRa® devices with GPS support and environmental sensors. The kit includes a development board with nRF52840 and Semtech LR1110, an Air530 GPS module and a 0.96” OLED display, ready to work with Meshtastic software. With support for Bluetooth 5.3, Zigbee, Thread and four Grove connectors, the kit offers extensive expansion possibilities and full freedom to design independent communication and location systems. Seeed Studio E24070201

Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Separated 4pin Header + SH1.0 3PIN Connector, Suitable For Raspberry Pi 5 Serial Port Debugging. USB TO TTL (D)

The ESP32-S3 SIM7670G 4G development board combines the ESP32-S3R2 microcontroller with the SIM7670G module, offering global LTE Cat-1, Wi-Fi, Bluetooth, and GNSS connectivity for advanced IoT applications. With support for lithium batteries and solar panels, as well as a built-in OV2640 camera, the board is ideal for remote monitoring projects, smart homes, and low-power applications.. Waveshare ESP32-S3-SIM7670G-4G-EN

Industrial computer based on Raspberry Pi Compute Module 4, with 2 GB RAM and 32 GB eMMC, supporting booting from SD card and a wide range of interfaces such as RS232, RS485, ADC, isolated I/O, PoE, WiFi, Bluetooth, and 4G/LTE with external antennas. With built-in Flash memory, support for PCI-e Gen2 and GPIO, as well as operation in voltages from 8 to 36 V, the device is ideal for applications requiring advanced communication and reliability in industrial environments. Edatec ED-CM4IND-1232-4C(EU)

Industrial computer with Cortex-A72 1.5GHz processor, 4GB RAM, 32GB eMMC and support for Micro-SD and M.2 NVMe SSD offers versatility with Gigabit Ethernet, 100M Ethernet and 4 isolated RS485 ports with ESD protection. Equipped with 8 isolated DI inputs and 8 DO outputs, powered by 9-36V DC, operates in temperatures from -25°C to 60°C, ideal for IoT, industrial automation and data acquisition. Edatec ED-IPC2614-0432