Gravity: GP8211 DAC Module - module with 1-channel DAC converter (I2C to 0-5V/10V)
ID: 1188235
5902186311442
zł42.61
Tax included
zł34.64 tax excl.
Gravity module designed based on the GP8211 system. It is a single-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.01%. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1071
Description
Gravity module designed based on the GP8211 system. It is a single-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.01%. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. This range is a standard control method and can be used in various automation applications, such as lighting regulation, frequency converters, valve regulation or pump control. . The module's high precision and resolution make it a suitable solution for projects that require high signal accuracy, such as precise speed or angle control. With this module, the user can achieve precise control of analog signals, making it a versatile tool for a variety of applications in the field of automation and DIY projects.
Features
- Chip type: GP8211
- Communication interface: I2C
- Resolution: 15-bit
- Output voltage: 0 to 5V or 0 to 10V
- Number of channels: 1 channel
- Value range: 0 to 32767 corresponding to 0-5V or 0-10V
- Accuracy: 0.01%
- Supply voltage: 3.3V to 5V
- Dimensions: 28 x 35 mm
Kit contains
- GP8211 Module: 1-Channel 15-bit I2C to 0-5V/10V DAC
- Gravity-4P I2C/UART cable
1188235
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Expansion board for micro:bit modules with connectors compatible with Boson and Gravity sets. DFRobot DFR0521
zł41.93
24h
Available quantity: 1
Available
I / O port expander designed for LattePanda V1.0. It provides all GPIO pins so that the set is compatible with the standard Arduino connector and the board does not interfere with other LattePanda ports. DFRobot DFR0491
zł51.93
24h
Available quantity: 3
Available
Gravity sensor adapter with 3-pin terminal connector. There are two 10 kΩ pull-up and pull down resistors on the board, set with a jumper. DFRobot DFR0055
zł9.34
24h
Available quantity: 3
Available
The expansion module for the Pyboard 1.1 set. The board has connectors compatible with the Gravity standard. Equipped with digital and analog pins, UART and I2C port. DFRobot DFR0577
zł18.34
Delivery date unknown
No product available!
Other products in the same category (16)
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for both single signals (11-bit resolution) and differential signals (12-bit resolution). I2C communication. SparkFun DEV-15334
zł92.94
24h
Available quantity: 1
Available
Module with 4-channel ADC ADS1115 converter. The system enables analog voltage conversion for single signals and differential signals with 16-bit resolution. I2C communication
zł14.90
4 weeks
No product available!
Module with an 8-channel ADC converter with 8-bit resolution. It uses the ADS7830 chip and is equipped with a STEMMA QT connector, thanks to which it communicates via the I2C interface. Adafruit 5836
zł30.15
24h
Available quantity: 6
Available
High-quality digital-to-analog converter that allows for pure stereo audio playback without the need for I2C configuration or the MCLK pin. It supports I2S signals (BCLK, WSEL, DIN) and audio formats up to 32 bits and 384 kHz, providing an excellent signal-to-noise ratio (110 dB). Audio output is available via a 3.5 mm jack or on-board pads, and the module works best as a line output to amplifiers and audio systems. Adafruit 6251
zł19.83
24h
Available quantity: 4
Available
Module with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. GM1008
zł259.58
24h
Available quantity: 2
Available
Audio module based on a 32-bit PCM5102A DAC converter intended for cooperation, among others with Raspberry Pi minicomputers. Communication via the I2S interface. GY-PCM5102
zł26.83
24h
Available quantity: 43
Available
Module with 4-channel ADC ADS1115 converter. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 1085
zł77.77
24h
Available quantity: 2
Available
Audio module designed for Teensy 3.2, 3.5, 3.6 and 4.0. It uses the PT8211 16-bit digital to analog converter (DAC) chip. PJRC PT8211-AUDIO-KIT
zł17.32
24h
Available quantity: 8
Available
High-quality digital-to-analog converter that allows for pure stereo audio playback without the need for I2C configuration or the MCLK pin. It supports I2S signals (BCLK, WSEL, DIN) and audio formats up to 32 bits and 384 kHz, providing an excellent signal-to-noise ratio (112 dB). Audio output is available via a 3.5 mm jack or on-board pads, and the module works best as a line output to amplifiers and audio systems. Adafruit 6250
zł24.85
4 weeks
No product available!
Miniature USB DAC with the PCM2704 chip enables conversion of a digital audio signal to analog with high quality and low distortion. Powered from the USB port, it works with Windows, MacOS and Android OTG systems, offering analog and SPDIF outputs for HIFI and mobile audio applications.
zł21.87
24h
Available quantity: 3
Available
Extension module with ADC AD7616 converter dedicated to FPGA boards. It offers 32 channels with a resolution of 16 bits and an FMC LPC connector. Numato Lab NLFMCADC002
zł6,195.01
3 weeks
No product available!
A module with a 3-channel ADC ADC ADS1015, which allows you to read voltages from -24 V to +24 V with a sampling frequency of up to 3.3 kHz and a resolution of 12 bits. Pimoroni PIM422
zł97.26
24h
Available quantity: 4
Available
Dual-channel DAC converter compatible with the SYZYGY standard. The module can simultaneously generate two 5V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod AWG 1411 410-397
zł647.15
3 weeks
No product available!
Audio expansion module with CS4344 24-bit DAC converter. Numato Lab EXPAUD002
zł107.19
3 weeks
No product available!
A module with a 24-bit ADC converter HX711, which allows you to read data from strain gauges and scales. It communicates via the serial interface. SparkFun SEN-13879
zł54.45
24h
Available quantity: 2
Available
DAC converter module with current output in the range of 0 to 25 mA. It is powered by 18 V to 24 V and communicates via I2C interface (Gravity connector). It is used as a controller in industrial applications. DFRobot DFR0972
zł50.50
24h
Available quantity: 1
Available
Gravity module designed based on the GP8211 system. It is a single-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.01%. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1071