Motoron M3T453 Triple I²C Motor Controller - 3-channel DC motor controller 4.5-44V 0.8A (JST-SH and VIN connectors)
ID: 1202576
zł75.20
Tax included
zł61.14 tax excl.
This controller allows independent control of three DC motors using a single I²C bus. It supports motor supply voltages ranging from 4.5 to 44 V and currents up to 0.8 A continuous per channel, making it suitable for a wide range of robotic and mobile applications. I²C communication eliminates the need to generate PWM signals and significantly saves microcontroller pins. The ability to connect multiple controllers on a single bus allows for easy scaling of the system to larger motor counts. Pololu 5082
Description
Motoron M3T453 Triple I²C Motor Controller is a compact controller that enables independent control of three DC motors using a single I²C bus. This solution is ideal for robotics projects, automation, and mobile systems where saving microcontroller pins and easy expandability are essential. Thanks to the ability to connect multiple Motoron controllers on one I²C bus, the system can be easily scaled to control a larger number of motors.
The module supports a wide motor supply voltage range from 4.5 V to 44 V, allowing cooperation with various power sources and battery types. Each channel provides up to 0.8 A continuous and 2 A peak current, which is sufficient for many light and medium-duty applications. Unlike classic motor drivers, Motoron does not require generating PWM signals—the entire communication is handled digitally via I²C. The device offers advanced features such as configurable acceleration and braking, reverse-polarity protection, and monitoring of the motor supply voltage. Built-in LEDs simplify diagnostics of operation and motor rotation direction. Thanks to its compact dimensions and low weight, the controller is ideal for space-constrained projects. This version is equipped with JST-SH connectors and a screw terminal for power supply connection.
Features
- Control of up to 3 bidirectional DC motors
- Control interface: I²C (up to 400 kHz)
- Ability to connect multiple controllers on a single I²C bus
- Motor supply voltage: 4.5 V to 44 V
- Maximum output current: 0.8 A continuous / 2 A peak per channel
- Logic voltage: 3.0 V to 5.5 V
- Reverse-polarity protection for motor power supply
- Current sensing (channels 1 and 2)
- Configurable motion parameters: acceleration, braking, delay
- Adjustable PWM frequency: 1 kHz to 80 kHz
- Timeout function that stops the motors if communication is lost
- LED indicators for status, direction, and errors
- JST-SH connectors
- Dimensions: 25.4 × 21.6 mm
- Weight: approx. 3.2 g
1202576
Data sheet
- Output current
- 0,8 A
- Number of channels
- 3
- Supply voltage min
- 4,5 V
- Supply voltages max
- 44 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
This controller allows independent control of three DC motors using a single I²C bus. It supports motor supply voltages ranging from 4.5 to 44 V and currents up to 0.8 A continuous per channel, making it suitable for a wide range of robotic and mobile applications. I²C communication eliminates the need to generate PWM signals and significantly saves microcontroller pins. The ability to connect multiple controllers on a single bus allows for easy scaling of the system to larger motor counts. Pololu 5085
zł71.46
Delivery date unknown
No product available!
Motoron M3T453 Triple I²C Motor Controller - 3-channel DC motor controller 4.5-44V 0.8A (soldered...
This controller allows independent control of three DC motors using a single I²C bus. It supports motor supply voltages ranging from 4.5 to 44 V and currents up to 0.8 A continuous per channel, making it suitable for a wide range of robotic and mobile applications. I²C communication eliminates the need to generate PWM signals and significantly saves microcontroller pins. The ability to connect multiple controllers on a single bus allows for easy scaling of the system to larger motor counts. Pololu 5084
zł75.20
Delivery date unknown
No product available!
This controller allows independent control of three DC motors using a single I²C bus. It supports motor supply voltages ranging from 4.5 to 44 V and currents up to 0.8 A continuous per channel, making it suitable for a wide range of robotic and mobile applications. I²C communication eliminates the need to generate PWM signals and significantly saves microcontroller pins. The ability to connect multiple controllers on a single bus allows for easy scaling of the system to larger motor counts. Pololu 5083
zł73.46
Delivery date unknown
No product available!
Other products in the same category (16)
This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature.
zł42.46
24h
Available quantity: 2
Available
Two-channel DC motor driver based on the HR9933 circuit. It allows you to control the movement of drives with a supply voltage of up to 10 V and power consumption up to 1.5 A. DFRobot DRI0040
zł21.46
24h
Available quantity: 4
Available
Single-channel DC motor driver that can control the movement of the drive with a supply voltage of up to 36 V and a current consumption of up to 15 A. Controlled by a PWM signal. DFRobot DRI0042
zł129.97
24h
Available quantity: 3
Available
Ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system. DRI0041
zł86.65
24h
Available quantity: 1
Available
The power module together with the engine controller has been specially created for the Romi Chassis chassis. With its help, we will supply all components of our construction and we will be able to control the engines responsible for the movement of the chassis. Pololu 3543
zł132.18
24h
Available quantity: 1
Available
Two-channel DC motor driver communicating via UART, SPI or I2C interface. It can control the movement of 3 to 11V motors with a maximum continuous current of 1.2A per channel. SparkFun ROB-13911
zł88.41
3 weeks
No product available!
Raspberry Pi Expansion Board, DC Motor / Stepper Motor Driver
zł115.66
24h
Available quantity: 2
Available
KAmodMPC17C724 is a module with a double MP bridge bridge type MPC17C724. The system allows you to control two DC brush motors or one bipolar stepping motor. The controller operates at a voltage range of 2.7 - 5.5 V and can work with motors with power consumption up to 0.4 A.
zł19.90
24h
Available quantity: 334
Available
The X-NUCLEO-IHM12A1 is a low voltage dual brush DC motor driver expansion board based on the STSPIN240 for STM32 Nucleo. It provides an affordable and easy-to-use solution for the implementation of portable motor driving applications such as thermal printers, robotics and toys
zł56.25
24h
Available quantity: 1
Available
The high power motor driver module works on the basis of Infineon BTS7960B systems. Maximum controller current: 43 A, operating voltage range: 5.5V - 27V. The module has a heat sink and can be controlled from the Arduino, Raspberry Pi, and STM levels. IBT_2
zł39.30
24h
Available quantity: 5
Available
No product available!
Powerful DC motor driver. It allows you to control a motor with a power supply voltage in the range of 6 ... 28 V, the motor can draw current of 100 A (using a heat sink). For the control PWM modeling (eg from RC receivers) is used in robotics, small electric vehicles or wherever there is a need to control a DC motor. Digilent 410-334-1
zł467.81
3 weeks
No product available!
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 Voperating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.
zł315.67
24h
Available quantity: 2
Available
HAT module with a driver for two DC motors designed for Raspberry Pi. Motors can be powered with the voltage from 6.5 to 30 V and draw a maximum current of up to 18 A. Pololu 3751
zł331.50
4 weeks
No product available!
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 Voperating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.
zł327.55
24h
Available quantity: 1
Available
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink.
zł288.26
24h
Available quantity: 1
Available
This controller allows independent control of three DC motors using a single I²C bus. It supports motor supply voltages ranging from 4.5 to 44 V and currents up to 0.8 A continuous per channel, making it suitable for a wide range of robotic and mobile applications. I²C communication eliminates the need to generate PWM signals and significantly saves microcontroller pins. The ability to connect multiple controllers on a single bus allows for easy scaling of the system to larger motor counts. Pololu 5082