Stepper Motor Driver Module ULN2003 SMD

Module with a stepper motor driver based on the DRV8834 system. It allows you to power a bipolar motor with a current of up to 2 A per phase, without using a heat sink. The system can be powered with a voltage of up to 10.8 V. Pololu 2134

This advanced Nema 23 stepper motor controller from the CLRS series is designed for precision industrial applications with RS485 (Modbus RTU) network communication. It eliminates the risk of lost steps with closed-loop feedback and offers support for Profile Position, Velocity, Homing, and PR Mode with a 16-position point-to-point control table. The controller supports up to 31 axes on a single network, offers up to 7 A current, a 20 to 50 VDC supply voltage, and passive or active cooling, making it a reliable solution for robotics, automation, and CNC systems. CL2C-RS57

A compact controller that enables precise control of bipolar stepper motors. It offers high precision movement thanks to the ability to control a stepper motor with a resolution of up to 1/128 steps and two control interfaces - clock-in step control and serial commands. SparkFun ROB-25167

Compact and efficient module designed for precise control of bipolar stepper motors, offering microstepping down to 1/32 step and maximum current up to 2 A in peak mode. Thanks to advanced features such as QuietStep (APFD) algorithm, built-in protections and pin compatibility with A4988, it is perfect for hobby, educational and industrial projects. Blue Edition version with four-layer board and 2 oz copper provides better heat dissipation, increasing reliability of operation even at higher loads. Pololu 5340

Compact and efficient module designed for precise control of bipolar stepper motors, offering microstepping down to 1/32 step and maximum current up to 2 A in peak mode. Thanks to advanced features such as QuietStep (APFD) algorithm, built-in protections and pin compatibility with A4988, it is perfect for hobby, educational and industrial projects. Blue Edition version with four-layer board and 2 oz copper provides better heat dissipation, increasing reliability of operation even at higher loads. Pololu 5341

Pololu 5342 stepper motor driver based on the A5984 IC, intended for controlling a single bipolar stepper motor with current regulation and microstepping support. Pololu 5342

Pololu 5343 stepper motor driver based on the A5984 IC, intended for controlling bipolar stepper motors with 5V or 3.3V logic levels, equipped with soldered goldpin headers. Pololu 5343

Pololu 5344 stepper motor driver based on the A5984 IC, intended for controlling bipolar stepper motors with 5V or 3.3V logic levels, supplied without soldered goldpin connectors. Pololu 5344

Pololu 5345 stepper motor driver based on the A5984 IC, intended for controlling bipolar stepper motors with 5V or 3.3V logic levels, equipped with soldered goldpin headers. Pololu 5345

Pololu 5346 stepper motor driver based on the A5984 IC, designed for driving bipolar stepper motors in electronic and robotics projects. Pololu 5346

Bipolar stepper motor driver operating at voltages from 8 to 50 V and currents up to 8 A/phase (11 A with cooling). The DRV8711 driver with an SPI interface offers 9 stepping modes (up to 1/256), current configuration, stall detection, and protection against short circuits, overloads, and reverse polarity. Compatible with 1.8–5 V logic, it is ideal for CNC machines, 3D printers, and robotics. Pololu 3731

Compact stepper motor driver based on the TMC5160-TA chip by Trinamic, designed for precise and quiet control of stepper motors in 3D printers, CNC machines, and other automation systems. The module operates with a motor supply voltage from 8 V to 35 V, providing high performance and stable operation thanks to advanced motion control algorithms. Communication is handled via the SPI interface, allowing precise configuration of operating parameters. The driver supports microstepping up to 1/256, ensuring very high motion precision and smooth motor operation. BIGTREETECH TMC5160T V1.0

This stepper motor driver offers microsteps down to 1/256th of a step, ensuring exceptional precision and smooth motion. Its simple operation—requiring only two microcontroller pins—and low operating voltage (1.8 to 10V) make it ideal for energy-efficient mobile, robotic, and DIY applications. Integrated connectors, LEDs, and a potentiometer for current adjustment facilitate prototyping and secure integration with popular platforms like Arduino and ESP32. Adafruit 6353

A stepper motor driver for precise control of bipolar motors, offering six microstepping modes (from full to 1/32). It operates within a voltage range of 8.2V to 44V and delivers up to 1.5A per phase without cooling or up to 2.2A with a heatsink/fan, ensuring smooth and stable operation even at high speeds. Compatible with the popular A4988 and DRV8825 drivers, with an integrated regulator and overheating, overload, and short circuit protection, the TB67S581FNG is a reliable and versatile solution for applications requiring precise motion control. Pololu 2989

A stepper motor driver for precise control of bipolar motors, offering six microstepping modes (from full to 1/32). It operates within a voltage range of 8.2V to 44V and delivers up to 1.5A per phase without cooling or up to 2.2A with a heatsink/fan, ensuring smooth and stable operation even at high speeds. Compatible with the popular A4988 and DRV8825 drivers, with an integrated regulator and overheating, overload, and short circuit protection, the TB67S581FNG is a reliable and versatile solution for applications requiring precise motion control. Pololu 2988

The A4988 driver is a module for controlling bipolar stepper motors with microstepping up to 1/16 step, supporting voltages up to 35 V and currents up to 2 A. It is used in 3D printers, CNC machines, and projects requiring precise motion control.