zł10,639.61
.png)
New products
New products New products
WIZnet W55RP20-EVB-Pico - development board with W55RP20 microcontroller, RJ45 Ethernet and PoE support
ID: 1207158
zł54.75
Tax included
zł44.51 tax excl.
Development board based on the W55RP20 microcontroller combines a dual-core RP2040 processor with the W5500 hardware Ethernet controller featuring a built-in TCP/IP stack. The board maintains Raspberry Pi Pico compatibility while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet capability using the WIZPoE-P1 module. The board is intended for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W55RP20-EVB-Pico
Description
The W55RP20-EVB-Pico development board is designed for projects requiring wired Ethernet communication and the capabilities of the W55RP20 microcontroller. The chip integrates a dual-core RP2040 microcontroller running at up to 133 MHz with the W5500 Ethernet controller featuring a hardware TCP/IP stack. The board maintains mechanical compatibility and most of the pinout of the Raspberry Pi Pico, allowing the use of existing accessories and software libraries. The board is equipped with a USB Type-C connector, an RJ45 Ethernet connector with an integrated transformer, and dual 20-pin GPIO headers.
Hardware Ethernet and TCP/IP protocol support
The W5500 controller processes the TCP/IP stack in hardware, reducing the workload of the microcontroller during network communication. It supports TCP, UDP, ICMP, IPv4, ARP, IGMP, and PPPoE protocols, provides eight independent hardware sockets, and includes 32 kB of internal memory dedicated to TX/RX packet buffers. The integrated 10/100 Mb/s Ethernet interface supports Auto Negotiation as well as Full and Half Duplex operating modes.
The board can be expanded with the optional dedicated WIZPoE-P1 PoE module, enabling power delivery through the Ethernet cable in accordance with the IEEE 802.3af standard.
Raspberry Pi Pico compatibility
The board layout remains compatible with Raspberry Pi Pico, making it easy to migrate existing projects and use compatible expansion boards. The microcontroller provides 22 multifunction GPIO pins, UART, I²C, SPI, PIO, PWM interfaces, and a 12-bit ADC. The board supports development using C/C++, Arduino IDE, PlatformIO, MicroPython, and CircuitPython, enabling the creation of network applications, IoT devices, HTTP servers, MQTT clients, and cloud-connected systems.
Features
- W55RP20 microcontroller
- Dual-core Arm Cortex-M0+ processor up to 133 MHz
- W5500 Ethernet controller with hardware TCP/IP stack
- 2 MB Flash memory
- 264 kB SRAM
- 10/100 Mb/s Ethernet interface
- RJ45 connector with integrated Ethernet PHY
- TCP, UDP, ICMP, IPv4, ARP, IGMP, and PPPoE protocol support
- Support for 8 independent hardware sockets
- 32 kB TX/RX buffer memory
- 22 multifunction GPIO pins
- Four 12-bit 500 kS/s ADC inputs
- 2 × UART
- 2 × I²C
- 2 × SPI
- 16 PWM channels
- 2 PIO blocks with 8 state machines
- USB Type-C interface for power and programming
- SWD debugging interface
- Raspberry Pi Pico compatible pinout
- Arduino IDE support
- PlatformIO support
- C/C++ support
- MicroPython support
- CircuitPython support
- Optional PoE support via the WIZPoE-P1 module
- AWS IoT Core Qualified
1207158
Data sheet
- Microcontroller
- W55RP20
- Flash memory
- 2 MB
- Number of I/O
- 22
- Ethernet
- 100Mb x1
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 69 mm
- Width
- 21 mm
- USB connector type
- USB type C
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
This miniature IEEE802.3af-compliant PoE module provides 5V power to devices at up to 8W without the need for a separate power cable. It supports both end-span and mid-span modes, offering high efficiency, electrical isolation, and easy integration into IoT and embedded systems. WIZnet WIZPoE-P1
zł51.71
Delivery date unknown
No product available!
Other products in the same category (16)
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
zł23.00
24h
Available quantity: 11
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
zł61.34
24h
Available quantity: 1
Available
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
zł232.36
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM578
zł66.22
24h
Available quantity: 5
Available
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
zł62.90
24h
Available quantity: 9
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-18288
zł70.41
24h
Available quantity: 4
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 60
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus
zł30.93
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-M
zł33.10
24h
Available quantity: 3
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero
zł18.65
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero-M
zł22.28
24h
Available quantity: 9
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96
zł50.81
24h
Available quantity: 4
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96-M
zł45.15
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 5302
zł50.91
24h
Available quantity: 6
Available
Mini board with RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Pimoroni SP011
zł85.02
4 weeks
No product available!
Board with RP2040 microcontroller and W5100S network chip. The module is equipped with an Ethernet connector. WIZnet W5100S-EVB-Pico
zł53.52
24h
Available quantity: 16
Available
Development board based on the W55RP20 microcontroller combines a dual-core RP2040 processor with the W5500 hardware Ethernet controller featuring a built-in TCP/IP stack. The board maintains Raspberry Pi Pico compatibility while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet capability using the WIZPoE-P1 module. The board is intended for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W55RP20-EVB-Pico