Best sellers
There are 16460 products.
The 6-55V 200W Step-Up Converter Module is a device that converts a DC input voltage (6-35V) to a higher DC output voltage (6-55V) with a maximum input power of 200W, a maximum input current of 10A and a maximum output current of 7A. It offers a high conversion efficiency of up to 97.6% and it is recommended to keep a margin when operating for long periods to avoid overheating.
This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 8 A at 4.5 V to 40 V. Pololu 2814
Miniature module with MicroSD card slot dedicated to QT Py and Xiao boards. Adafruit 5683
A set of accessories for building a retro console based on the Raspberry Pi minicomputer. The set includes a display with a plate, housing and necessary mounting elements. WSH GamePi43-Acce-EU
Module with nitrogen dioxide sensor made in MEMS technology. It allows gas detection in the range of 0.1 to 10 ppm and has an analog output. DFRobot SEN0574
Module with a black and white OLED display with a diagonal of 1.3". It has a resolution of 128x64 pixels and a SH1107 controller. Communication with the module is carried out via the I2C or SPI interface. WSH 1.3inch OLED Module (C)
A set of two 90x10mm yellow Pololu wheels. Fits D-shaped shaft with a diameter of 3mm. Pololu 1437
The module with a color LCD display with a diagonal of 1.14". It has a resolution of 240x135 pixels and an ST7789 controller. Communication with the module is realized via the SPI interface. Waveshare 1.14inch LCD Module
TFT color LCD display module with a diagonal of 1.3" and a resolution of 240x240 pixels. It has a built-in ST7789 driver and communicates via SPI interface. It is equipped with a microSD card slot and an EYESPI connector. Adafruit 4313
Converter that provides easy communication between the RS485 and RJ45 Ethernet interface. It supports the Modbus RTU and Modbus TCP protocols. USR-N510
The Step-Up converter module with a power of 65W converts the voltage in the range of 3-35V to 3.5-35V with an efficiency of over 96%. Equipped with a voltmeter, it operates in temperatures from -40°C to 85°C.
Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150
Module with MOSFET and a Gravity connector. It allows you to easily connect and control the voltage from 5V to 30V and the current up to 2.5A. DFRobot DFR0643
Miniature module with button and RGB NeoPixel LED dedicated to QT Py and Xiao boards. Adafruit 5666
Rain sensor consisting of a measuring module and a container. It provides users with information about the precipitation value in millimeters and system operation time via UART and I2C interfaces. DFRobot SEN0575
A set of two 80x10mm yellow Pololu wheels. Fits D-shaped shaft with a diameter of 3mm. Pololu 1432
Espressif ESP32-S2 WiFi chip module. It integrates a TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 53
The USB Step-Up converter module converts 3.5-12V input voltage to 4-24V output, offering different power values depending on the voltage level. Equipped with a 3-bit digital display, it has a compact size of 80 x 20 x 14mm.
YT-2824 Phillips screwdriver with VDE insulation, made of durable S2 steel with a hardness of HRC 56-60.
Development board with ESP32-S3-WROOM-1-N16R8 module. It is equipped with the OV2640 camera, making it ideal for applications such as image recognition. It offers a large memory capacity (8 MB PSRAM and 16 MB Flash memory) and a rich set of communication interfaces. DFRobot DFR0975