ArduCAM Mega 5MP SPI Camera Module - camera with 5MP sensor and SPI interface
ID: 1195236
5902186307858
zł162.89
Tax included
zł132.43 tax excl.
A rolling shutter camera designed for use with microcontrollers equipped with an SPI interface. Equipped with a 5MP sensor and autofocus, it captures detailed images. With a simple API, low power consumption, and support for multiple platforms (Arduino, ESP32, STM32), it's ideal for applications in surveillance, IoT, education, and automation. ArduCAM B0401
Description
The ArduCAM Mega 5MP SPI is a modern camera module with a rolling shutter, designed to work with any microcontroller equipped with an SPI interface. Featuring an autofocus lens and a high-resolution 2592x1944 pixel (5MP) image sensor, it delivers exceptionally detailed images. The device is extremely easy to operate – it can be controlled using simple API commands, much like a digital SLR camera. It is ideal for projects such as surveillance, environmental monitoring, IoT automation, and both educational and industrial applications. The built-in autofocus supports a focusing range from 8 cm to infinity, making this camera a versatile solution for a wide variety of tasks. The device supports up to four cameras connected to a single microcontroller, enabling simultaneous image capture.
The optimized SDK architecture with a hardware abstraction layer allows for rapid integration across multiple platforms, including Arduino, ESP32, STM32, and many others. The camera is low-power, making it an excellent choice for portable and battery-powered projects. It is a complete and compact vision solution for embedded system developers.
Features
- Sensor resolution: 5MP (2592x1944)
- Shutter type: Rolling Shutter
- Optical size: 1/4''
- Autofocus lens
- Focal length: 3.3 mm
- Focus range: 8 cm to infinity
- Field of view: 68.75° (Diagonal)
- Aperture: f/2.0
- Output formats: RGB, YUV, JPEG
- Interface: SPI (4-wire)
- Transmission speed: 8 MHz
- Connector: XH2.54-6P
- Power supply: 3.3V / 5V
- Current consumption: 55 mA (idle), 154 mA (active)
- Power consumption: 182 mW – 650 mW
- Dimensions: 33 x 33 x 17 mm
Kit contains
- ArduCAM Mega 5MP SPI camera
- 6-pin cable (300 mm)
1195236
Data sheet
- Resolution
- 5MPx
- Interface
- SPI
- Sensor
- Inny
- IR filter
- Yes
- Lens assembly
- none
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
An advanced 5MP camera with an SPI interface, it boasts low power consumption, high image quality, and broad compatibility with popular microcontrollers such as Arduino, ESP32, STM32, and RISC-V. This model is equipped with an M12 NoIR lens with manual focus, enabling image capture at night and in low-light environments. An open API and MIT-licensed SDK make the camera ideal for IoT systems, industrial automation, educational, and environmental projects. ArduCAM B0437
zł188.74
24h
Available quantity: 2
Available
5 MP CMOS camera with M12 lens and Rolling Shutter, designed for IoT, monitoring and automation. Communicates via SPI interface, works with popular microcontrollers (Arduino, ESP32, STM32, Raspberry Pi Pico), offers low power consumption and high image quality with <1.53% distortion. Supports JPEG, RGB, YUV formats and allows you to connect up to 4 cameras simultaneously; integration facilitated by open SDK under MIT license. ArduCAM B0436
zł207.28
24h
Available quantity: 1
Available
A low-power, 3MP rolling shutter camera module designed to work with virtually any microcontroller via its SPI interface. Equipped with an M12 lens with manual focus, it delivers high image quality, making it ideal for IoT, monitoring, and automation applications. With low latency, an open SDK (MIT), and the ability to connect up to four cameras simultaneously, this module offers a flexible and scalable solution for advanced machine vision projects. ArduCAM B0434
zł141.57
24h
Available quantity: 2
Available
A low-power, 3MP rolling shutter camera module designed to work with virtually any microcontroller via its SPI interface. Equipped with a NoIR M12 lens with manual focus, it delivers high image quality even in low light, making it ideal for IoT, monitoring, and automation applications. With low latency, an open SDK (MIT), and the ability to connect up to four cameras simultaneously, this module offers a flexible and scalable solution for advanced machine vision projects. ArduCAM B0435
zł141.57
24h
Available quantity: 2
Available
This camera features a 2048x1536 px sensor and a rolling shutter, designed to interface with microcontrollers via an SPI interface. Its low power consumption (<200 mW), fast wake-up time (42 ms), and support for multiple platforms (Arduino, STM32, ESP32) make it ideal for IoT, monitoring, and automation projects. Simple API commands, the ability to connect up to four cameras, and an open SDK make it a universal tool for engineers and hobbyists. ArduCAM B0400
zł117.97
24h
Available quantity: 2
Available
Other products in the same category (16)
Camera module with OV7670 sensor with a resolution of 640x480 px (0.3 MPx). Communicates via the SCCB (Serial Camera Control Bus) interface
zł13.00
24h
Available quantity: 4
Available
8 MPx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. Waveshare IMX219-D160
zł53.41
4 weeks
No product available!
Camera module with a USB interface with a resolution of 5 MP and an OV5640 sensor. Equipped with auto focus. Waveshare OV5640 5MP USB Camera (B)
zł128.30
24h
Available quantity: 6
Available
The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0153
zł225.90
4 weeks
No product available!
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
zł90.41
24h
Available quantity: 3
Available
Camera with a resolution of 5 MPx with a USB interface. Equipped with a CMOS OV5648 sensor and a microphone. ArduCAM UB0238
zł153.04
24h
Available quantity: 5
Available
Module with a 64 MP camera designed for Raspberry Pi minicomputers. Equipped with autofocus and 10x digital zoom. ArduCAM B0399
zł287.61
24h
Available quantity: 2
Available
Camera module with OV5640 sensor with a resolution of 5 MP. Equipped with fisheye lens, it communicates via the SCCB interface. Waveshare OV5640 Camera Board (B)
zł110.60
24h
Available quantity: 1
Available
A miniature 16MP camera with a Sony IMX519 sensor, designed for projects requiring compact solutions. With autofocus and 16MP resolution, it offers high image quality, ideal for surveillance, robotics, and image recognition systems. Compatible with Raspberry Pi and Jetson platforms, it supports Full HD recording and connects via the MIPI CSI interface, ensuring easy integration with embedded systems. ArduCAM B0389
zł155.04
24h
Available quantity: 1
Available
Camera module with OV5647 sensor and movable lens with software-controlled focus. Works with Raspberry Pi. The camera is equipped with a matrix with a resolution of 5 MPx. ArduCAM B0176
zł68.49
24h
Available quantity: 1
Available
A set with a camera with a resolution of 0.3 MPx with an OV7251 sensor, a USB adapter and a MIPI adapter. ArduCAM EK022
zł1,150.04
4 weeks
No product available!
IMX219-120-4Lane 8MP camera module for Raspberry Pi 5, offering a 3280×2464 pixel image resolution and a 120° wide viewing angle. With its MIPI-CSI-4Lane interface and compact design, it is ideal for monitoring, robotics and machine vision systems. DFRobot SEN0631
zł145.42
24h
Available quantity: 2
Available
Camera with a global shutter designed for Raspberry Pi minicomputers. Works with all versions of minicomputers with a CSI slot. The camera is equipped with a Sony IMX296 sensor with a resolution of 1.5 MPx and a built-in IR filter. Raspberry Pi Global Shutter Camera
zł269.00
24h
Available quantity: 41
Available
Camera module based on the CMOS MT9N001 matrix with a resolution of 3488x2616 px (9 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0098
zł243.31
24h
Available quantity: 2
Available
M5Stack U078-V-M12 is a flexible camera module that integrates perfectly with the M5Stack platform, providing users with advanced image processing capabilities. With the GC2053 image sensor and SSD202D processor, this module is ideal for AI and machine vision applications, offering high performance and easy integration with other M5Stack components
zł213.79
24h
Available quantity: 1
Available
Inspection camera with a flexible probe, 1m long. It allows you to observe the interior of the devices from different angles through a small inspection opening without the need to disassemble them. Uni-T UT665
zł317.34
2 weeks
No product available!
A rolling shutter camera designed for use with microcontrollers equipped with an SPI interface. Equipped with a 5MP sensor and autofocus, it captures detailed images. With a simple API, low power consumption, and support for multiple platforms (Arduino, ESP32, STM32), it's ideal for applications in surveillance, IoT, education, and automation. ArduCAM B0401