.png)
Teltonika EBD021 CALYX 4G HAT+ for Raspberry Pi
ID: 1207973
4779051845910
zł151.61
Tax included
zł123.26 tax excl.
The cellular modem adds 2G, 3G, and 4G LTE connectivity to compatible Raspberry Pi computers. The HAT+ form factor, 40-pin connector, USB interface, and cellular modem functions support integration with embedded and communication systems. Teltonika EBD021
Description
Teltonika EBD021 belongs to the CALYX family and uses the Raspberry Pi HAT+ form factor. The module provides 2G, 3G, and 4G LTE connectivity and communicates with the host through USB. Ethernet-over-USB operation using RNDIS/ECM allows the cellular connection to be presented to the operating system as a network interface, while USB serial ports provide access to AT commands.
The 40-pin connector provides power and control signals for integration with Raspberry Pi platforms. Power can also be supplied through the USB Type-C connector. The module supports SIM-based cellular communication and is intended for embedded applications requiring direct mobile network access from a Raspberry Pi.
Features
- Manufacturer: Teltonika Networks
- Model: EBD021
- Series: CALYX
- Device type: cellular HAT+ modem
- Cellular technologies: 2G, 3G, 4G LTE
- Host interface: USB
- Data mode: RNDIS/ECM Ethernet over USB
- AT command access through USB serial ports
- Main connector: 40-pin
- USB connector: USB Type-C
- USB power supply: 5 V DC
- 40-pin connector power supply: 5 V DC and 3.3 V DC
- Control signals for modem operation
- Raspberry Pi HAT+ form factor
- SIM support
- Status indication LEDs
- Intended for embedded and communication applications
1207973
Data sheet
- Compatible with
- Raspberry Pi 5/4B
Other products in the same category (16)
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT
zł1,356.33
4 weeks
No product available!
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT (with case)
zł1,457.21
4 weeks
No product available!
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł117.06
4 weeks
No product available!
HAT module designed for Raspberry Pi minicomputer. Powala adds two CAN interfaces to the project. Waveshare 2-CH CAN HAT
zł92.30
24h
Available quantity: 5
Available
The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)
zł143.69
4 weeks
No product available!
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł410.55
24h
Available quantity: 4
Available
WiFi antenna compatible with Raspberry Pi Compute Module 4. Supports 2.4G and 5G frequency bands. Waveshare ORD-CM4-ANTENNA
zł12.15
24h
Available quantity: 38
Available
Certified WiFi antenna compatible with Raspberry Pi Compute Module 4. Supports 2.4G and 5G frequency bands. Waveshare Compute Module 4 Antenna Kit
zł35.83
4 weeks
No product available!
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
zł262.83
4 weeks
No product available!
NFC reader module dedicated to the Raspberry Pi. It is based on the PN532 operating in the 13.56 MHz frequency range. Waveshare PN532 NFC HAT
zł80.49
4 weeks
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł146.10
24h
Available quantity: 4
Available
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
zł93.36
4 weeks
No product available!
A two-channel RS485 expansion module designed for the Raspberry Pi. It uses the TP75176E transceiver and CH432T chip and offers a stable connection between devices. DFRobot DFR0824
zł132.53
24h
Available quantity: 2
Available
The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT
zł623.55
4 weeks
No product available!
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
zł1,545.30
24h
Available quantity: 1
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł114.60
24h
Available quantity: 4
Available
The cellular modem adds 2G, 3G, and 4G LTE connectivity to compatible Raspberry Pi computers. The HAT+ form factor, 40-pin connector, USB interface, and cellular modem functions support integration with embedded and communication systems. Teltonika EBD021