CT433-HSWF30DR TMR Current Sensor - current sensor module 0-30A, 3.3V
ID: 1196561
zł52.79
Tax included
zł42.92 tax excl.
Compact current sensor based on TMR technology, enabling precise measurements up to 30 A with minimal energy losses. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5317
Description
CT433-HSWF30DR TMR Current Sensor is a compact current sensor module based on Allegro's TMR (Tunneling Magnetoresistance) technology. It is designed for precise current measurements in the range of 0 A to 30 A, offering electrical isolation and high resistance to interference. With a wide 1 MHz bandwidth, the sensor is ideal for applications requiring a fast response to current changes. The device has an extremely low conduction path resistance of just 1 mΩ, minimizing energy losses. Its analog voltage output, proportional to current intensity, enables accurate monitoring of both DC (direct current) and AC (alternating current). Due to its resistance to magnetic fields, the sensor’s orientation relative to external fields does not affect the measurements. The sensor operates with a supply voltage range of 3.0 V to 3.6 V, and its output is non-ratiometric, meaning that the zero-point and sensitivity are independent of the actual supply voltage. An optional overcurrent protection function (FLT) signals when 110% of the maximum measurement range is exceeded, allowing for rapid fault detection.
The compact PCB is made of two-layer copper, ensuring durability and reliability, while the 2.54 mm pin spacing allows for easy use with prototype boards and development modules. Connection points are clearly labeled on the silkscreen layer, and an additional arrow indicates the direction of positive current flow. The sensor can be inserted anywhere in the circuit, providing galvanic isolation and eliminating the need for complex measurement circuits. With its high accuracy, small size, and strong resistance to interference, the CT433-HSWF30DR is an excellent choice for power systems, power converters, and motor control applications. Its versatility and ease of implementation make it a great solution for both engineers and hobbyists.
Features
- Sensor type: Allegro CT433-HSWF30DR
- Current measurement range: 0 A to 30 A
- Supply voltage: 3.0 V to 3.6 V
- Bandwidth: 1 MHz
- Current path resistance: 1 mΩ
- Response time: 300 ns
- Analog output proportional to AC/DC current
- Common-mode field immunity
- Optional overcurrent output (FLT)
- Operating temperature: -40°C to 125°C
- Dimensions: 20.32 mm × 27.94 mm
- Weight: 2.3 g
1196561
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- 0 - 30 A
- Sposób podłączenia
- Szeregowy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Compact current sensor based on TMR technology, enabling precise measurements up to 20 A with minimal energy losses. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5316
zł52.79
Delivery date unknown
No product available!
Compact current sensor based on TMR technology, enabling precise measurements up to 30 A with minimal energy losses. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5305
zł52.79
Delivery date unknown
No product available!
Compact current sensor based on TMR technology, enabling precise measurements up to 20 A with minimal energy loss. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5304
zł52.79
24h
Available quantity: 2
Available
Other products in the same category (16)
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł14.97
24h
Available quantity: 16
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł45.46
24h
Available quantity: 1
Available
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5235
zł63.04
24h
Available quantity: 2
Available
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł51.82
4 weeks
No product available!
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352
zł18.77
4 weeks
No product available!
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
zł18.82
24h
Available quantity: 2
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241
zł22.16
24h
Available quantity: 3
Available
This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. Pololu 5410
zł133.97
4 weeks
No product available!
ACS711EX Current Sensor Carrier -15.5A to +15.5A
zł21.86
24h
Available quantity: 8
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5446
zł17.10
4 weeks
No product available!
The current measurement of 0 - 30A is carried out by the ACS712-30 system based on the Hall effect. The sensitivity of the system is 66mV / A (analog signal).
zł6.86
24h
Available quantity: 9
Available
The ACS72981 current sensor module uses the Hall effect to precisely and safely measure DC current while providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes power loss and offers a fast response time of less than 2 µs. Pololu 5284
zł64.19
4 weeks
No product available!
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5232
zł50.34
4 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5259
zł58.79
24h
Available quantity: 2
Available
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
zł22.35
24h
Available quantity: 5
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
3 weeks
No product available!
Compact current sensor based on TMR technology, enabling precise measurements up to 30 A with minimal energy losses. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5317