Crowtail – Current Sensor 2.0 – AC/DC current sensor up to ±20 A with ACS712 chip, analog output
ID: 1201710
5902186332164
zł37.74
Tax included
zł30.68 tax excl.
Crowtail – Current Sensor 2.0 enables AC/DC current measurement up to ±20 A using the ACS712 chip and generates an analog signal for further analysis. Used in energy-consumption monitoring systems, automation, and laboratory measurements.
Description
The Crowtail – Current Sensor 2.0 module enables precise measurement of direct and alternating current up to ±20 A using the ACS712 measurement chip. The module’s output is an analog voltage proportional to the measured current, which allows direct reading via an ADC in a microcontroller. The sensor is suitable for applications involving energy-consumption monitoring, load measurement, and measurement systems for consumer electronics and automation. Offset and sensitivity adjustment allows calibration of the system under laboratory conditions.
Properties
- Measurement range: ±20 A (AC/DC)
- Output: analog voltage proportional to current
- Support for alternating and direct current
- Measurement chip: ACS712
- Offset and sensitivity calibration capability
- Compatibility with the Crowtail system
- Dimensions: 40.0 × 20.0 × 6.8 mm
Included
- Crowtail – Current Sensor 2.0 module x1
- Crowtail 4-pin cable x1
1201710
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±20 A
- Sposób podłączenia
- Nieinwazyjny
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
zł17.92
24h
Available quantity: 2
Available
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
zł136.90
3 weeks
No product available!
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 45 A. SparkFun SEN-16407
zł136.90
3 weeks
No product available!
Analogue current sensor module. Allows measurement of AC and DC currents up to 50 A. DFRobot SEN0098-V2
zł73.42
24h
Available quantity: 2
Available
Power monitor module that detects voltages up to 60 VDC and current up to 30 A. It uses the Allegro MicroSystems ACS37800 IC, which simplifies adding monitoring to power systems. SparkFun SPX-17873
zł179.00
3 weeks
No product available!
ACS724LLCTR-05AU current sensor module with a current measurement range from 0 to 5 A. It communicates via an analog interface. Pololu 4048
zł35.78
24h
Available quantity: 3
Available
ACS724LLCTR-30AB current sensor module with a DC and AC measurement range from -30 to +30 A. It communicates via an analog interface. Pololu 4047
zł42.14
24h
Available quantity: 5
Available
ACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
zł36.21
24h
Available quantity: 5
Available
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł42.39
4 weeks
No product available!
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł36.81
4 weeks
No product available!
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł75.92
4 weeks
No product available!
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240
zł20.02
24h
Available quantity: 4
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241
zł22.16
24h
Available quantity: 2
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5243
zł21.07
24h
Available quantity: 2
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5244
zł22.15
24h
Available quantity: 3
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł21.37
24h
Available quantity: 3
Available
Crowtail – Current Sensor 2.0 enables AC/DC current measurement up to ±20 A using the ACS712 chip and generates an analog signal for further analysis. Used in energy-consumption monitoring systems, automation, and laboratory measurements.