IR proximity sensor used to detect objects at a distance of 10 (±5) mm to 80 (±20) mm using infrared radiation. It works on the principle of using emission and reflection of rays. It consists of two basic components: a transmitter and a receiver. The transmitter emits a beam of infrared radiation towards the area to be monitored. The receiver is sensitive to the reflection of this beam from objects within the range of the sensor.
The advantages of IR sensors are their strong anti-interference capability, fast response and small size. This makes the module easy to integrate into a variety of devices. The sensor has a housing with mounting holes, allowing users to design a suitable installation to ensure water resistance. This allows the module to also be used in sanitary facilities. The sensor is powered by 5 V and has a digital output. Full documentation and examples of use are available on the product page.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Non-contact liquid level sensor. It allows you to detect liquids without the need to immerse the sensor in the liquid. Digital output. DFRobot FIT0212
Doppler radar module with 24GHz transceiver. It allows for precise distance measurement and motion detection. The board communicates via the UART interface. Seeed Studio 101990883
A set of LIDAR laser scanner and data processing unit. It allows you to create maps of areas up to 100 000 m². Range up to 20 m and resolution up to 5 cm. It has a built-in inertial 9-DOF navigation system. Seeed Studio 114991984
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 RS485/RS232
No product available!
Ultrasonic obstacle sensor (vehicles) with high resolution and range up to 500cm with USB interface. It allows you to perform measurements at 4Hz. DFRobot SEN0268
No product available!
The set consists of the STM32 NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-6180A1 board with the VL6180 distance sensors operating in ToF technology. STMicroelectronics P-NUCLEO-6180A1
Advanced distance sensor with a range of up to 50 m, offering accuracy of ±3 cm and immunity to ambient light up to 100K LUX. With UART and I2C interfaces, the device is compatible with various platforms such as Raspberry Pi and finds applications in robotics, route planning and warehouse detection. Waveshare TOF Laser Range Sensor (D)
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Adafruit 3595
Module with ToF VL53L4CD sensor with a range of up to 1.3 m and a resolution of 1 mm. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5396
Module with a digital distance sensor with a range of up to 25 cm. It has a digital output that goes low when an object is detected. Pololu 4066
Module with a distance sensor with a range of up to 130 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4071
LiDAR laser distance sensor that can scan the environment in two or three dimensions. Offers a range of up to 8 m for 2D measurements and 2 m for 3D measurements. It communicates via the UART interface and can be connected to a computer thanks to the supplied USB adapter. SparkFun SEN-18580
No product available!
Module with a digital distance sensor with a range of up to 5 cm. It has a digital output that goes low when an object is detected. Pololu 4050
Module with a distance sensor with a range of up to 300 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4079
Laser distance sensor with a measurement range of 0.1 m to 12 m dedicated to indoor use. It communicates via UART or I2C interface. Benewake TFmini Plus Indoor
No product available!
A miniature lidar distance sensor that detects objects up to 5 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5550
No product available!
Laser distance sensor with a measuring range of up to 4 m based on the ToF measurement technique. Communication with the module takes place via the I2C interface. Pimoroni PIM373
IR proximity sensor used to detect objects at a distance of 10mm to 80mm using infrared radiation. It is powered by 5 V and has a digital output. DFRobot SEN0556