ESL-Gateway-AP base station for ESL e-Paper labels - Waveshare 29512

Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405

A board with an ESP32 module equipped with a 1.28-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-Touch-LCD-1.28

A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484

ESP32-S3-Touch-LCD-5B is an advanced development platform featuring a high-resolution 5" IPS display with a five-point touch panel, designed for embedded projects, HMI panels, and automation. Its high processing power, versatile interfaces, and support for programming in C/C++ and MicroPython make the module suitable for both prototyping and fully developed industrial solutions.

Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-Pico-M

Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U

ESP32-S3-LCD-4 is an advanced development board with a 4" display, intended for high-level HMI, automation, and interactive system applications. The non-touch version offers a full set of industrial interfaces (RS485, CAN, I2C), integrated power management, and flexible mounting options. With high computational performance, ample memory resources, and support for ESP-IDF and Arduino IDE environments, it serves as a solid platform for implementing control and communication systems in end devices.

Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1

A board with a built-in ESP-WROOM-32 module and an 0.96 "OLED display (SSD1306) with a resolution of 128x64. The ESP32 system enables communication of WiFi 2.4 GHz and Bluetooth BLE v4.2 networks. modESP32_OLED

A shield designed to collect data from the MyoWare 2.0 Muscle Sensor and transmit it wirelessly using the ESP32-WROOM module. Equipped with a built-in 40 mAh LiPo battery. SparkFun DEV-23387

Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with soldered connectors. Waveshare ESP32-H2-DEV-KIT-N4-M

M5Stack series kit equipped with ESP32 and camera with OV3660 sensor. It has a built-in W5500 chip and can be powered by the RJ45 (PoE) connector. M5Stack U121-B-V11

Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M

This kit offers an attractive combination of a modern AMOLED display with the advanced functionality of the ESP32-S3, providing a powerful and compact solution for projects requiring graphics, motion sensors, and wireless communication. With a pre-soldered connector and aesthetically pleasing enclosure, the board is suitable for both prototyping and end-use applications. Waveshare ESP32-S3-AMOLED-1.91-M

A compact development board based on the ESP32-WROOM-32, offering 2.4 GHz Wi-Fi, Bluetooth, and a dual-core 240 MHz processor with 4 MB FLASH and 4 MB RAM. It is compatible with the WeMos Mini family of boards and supports popular shields, making it a universal solution for IoT projects. With a built-in USB–UART converter and support for the Arduino IDE, it provides easy programming and integration. ESP32 D1 mini

ESP32-C6-DEV-KIT-N16 is a versatile development board with support for Wi-Fi 6, Bluetooth 5, and Zigbee/Thread, based on the ESP32-C6 microcontroller with 16 MB of Flash memory. The version without soldered pin headers allows flexible integration in projects with non-standard mounting requirements, while still providing full functionality and a rich set of interfaces for IoT applications, automation, and embedded systems.