ESP32-S3 development board with 1.8″ AMOLED touch display 368×448 - Waveshare 29958
ID: 1197650
zł129.11
Tax included
zł104.97 tax excl.
ESP32-S3-Touch-AMOLED-1.8-EN is a high-performance, compact module with an AMOLED display and capacitive touch, designed for creating modern user interfaces in wearable devices, portable data acquisition systems, IoT controllers, and solutions with gesture and voice interaction. Thanks to advanced power management and rich peripheral features, it is well-suited for projects requiring independent power supply and high integration.
Description
Miniature development module with the ESP32-S3R8 microcontroller, featuring a dual-core Xtensa LX7 processor running up to 240 MHz, with support for 2.4 GHz Wi-Fi and Bluetooth 5 LE. The integrated 1.8-inch AMOLED display with a resolution of 368×448 px delivers 16.7 million colors, a wide 178° viewing angle, and a high contrast ratio of 100000:1. Capacitive touch is supported via the FT3168 controller over the I2C interface.
The device includes a QMI8658 IMU sensor (3-axis accelerometer and 3-axis gyroscope), AXP2101 power management unit, PCF85063 RTC, and ES8311 audio codec. It provides available GPIO, I2C, UART, and USB interfaces, a TF card slot, and an MX1.25 connector for an optional 3.7 V battery. The enclosure with a hinged back makes it easy to integrate into embedded projects.
No battery is included – intended for projects with an external power source or custom battery installation (compatible with 3.85×24×28 mm dimensions).
Features
- ESP32-S3R8 with dual-core Xtensa 32-bit LX7 processor up to 240 MHz
- Support for 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE
- 16 MB Flash, 8 MB PSRAM, 512 kB SRAM, 384 kB ROM
- 1.8" AMOLED display, 368×448 px, 16.7 million colors, QSPI interface
- Capacitive touch (FT3168) via I2C interface
- QMI8658 IMU sensor (3-axis accelerometer and 3-axis gyroscope)
- PCF85063 RTC powered by AXP2101 with backup battery support
- ES8311 audio codec, microphone, speaker
- TF card slot, USB Type-C port, PWR and BOOT buttons
- MX1.25 connector for 3.7 V battery (not included)
- Available GPIO, UART, I2C, USB
1197650
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł36.16
24h
Available quantity: 28
Available
The ESP32-S3-DevKitC-1-N8R2 is an advanced development board with the ESP32-S3-WROOM-1/1U module, offering versatile wireless connectivity with support for 2.4 GHz WiFi and Bluetooth LE 5.0. With high computational power, ample memory, and a wide range of interfaces, this board is perfect for a variety of applications, including IoT, automation, and smart agriculture. Espressif Systems ESP32-S3-DevKitC-1-N8R2
zł125.71
24h
Available quantity: 2
Available
Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero
zł15.88
4 weeks
No product available!
ESP32-S3-Touch-LCD-4.3B is an advanced development platform with a touchscreen display, designed for rapid prototyping and HMI interface development. With support for Wi-Fi, Bluetooth, multiple communication interfaces, and isolated digital inputs/outputs, it is well-suited for automation systems, industrial devices, access controllers, and operator panels. The availability of an enclosed version and multiple mounting options allows for integration in diverse installation environments.
zł173.07
4 weeks
No product available!
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
zł399.01
24h
Available quantity: 2
Available
Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325
zł74.27
24h
Available quantity: 4
Available
Small AI development board based on ESP32-S3 SoC with integrated WiFi 802.11 b/g/n and BLE transceiver. It has a built-in 2 MP camera, LCD display and microphone. Espressif ESP32-S3-EYE
zł288.99
24h
Available quantity: 2
Available
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
zł102.85
24h
Available quantity: 2
Available
A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484
zł53.41
24h
Available quantity: 3
Available
ESP32-C6-LCD-1.47 integrates a graphic display, TF card slot, and wireless communication (Wi-Fi 6/BLE) in a compact form. The module serves as a functional platform for IoT projects, HMI applications, mobile controllers, and interactive devices. With broad software support and compatibility with popular tools, it facilitates prototyping and integration with other systems.
zł49.18
4 weeks
No product available!
Development board with Espressif ESP32-S2 module. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks. It offers 4 MB of Flash memory. It is programmed via the USB Type-C connector using Arduino, MicroPython, CircuitPython or ESP-IDF. WeMos S2 Mini V1psRAM
zł17.74
24h
Available quantity: 35
Available
A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3
zł166.70
4 weeks
No product available!
ESP32-S3-AMOLED-1.91 enables rapid design and deployment of solutions with a modern user interface. Its compact form, high-quality AMOLED display, and built-in wireless features make it a suitable platform for portable devices, data visualization, and motion-based interaction applications.
zł136.12
4 weeks
No product available!
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96-M
zł70.48
24h
Available quantity: 5
Available
ESP32-S3-LCD-1.85 is a versatile development board for ESP32-S3 applications, offering a full set of peripherals such as audio, display, and motion sensors, without touch functionality. Ideal for projects requiring rich graphical presentation and user interface in AI, IoT, and non-touch interactive systems.
zł116.30
4 weeks
No product available!
Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U
zł25.35
24h
Available quantity: 194
Available
ESP32-S3-Touch-AMOLED-1.8-EN is a high-performance, compact module with an AMOLED display and capacitive touch, designed for creating modern user interfaces in wearable devices, portable data acquisition systems, IoT controllers, and solutions with gesture and voice interaction. Thanks to advanced power management and rich peripheral features, it is well-suited for projects requiring independent power supply and high integration.