- New
2.9" e-Paper Display FeatherWing Grayscale SSD1680 - Adafruit 4777
ID: 1199905
5902186333833
zł108.62
Tax included
zł88.31 tax excl.
FeatherWing module with a 2.9" e-paper display featuring a 296×128 px resolution, supporting 4 grayscale levels and based on the SSD1680 driver, designed for Feather-standard boards. Adafruit 4777
Description
The Adafruit 4777 is designed for integrating an e-paper display with development boards in the Feather standard. The module uses eInk technology, allowing static images to remain visible without continuous power, while offering high contrast and excellent readability in daylight. This solution is suitable for low-power projects such as information displays, user interfaces, portable terminals, and battery-powered devices.
The integrated 2.9" display with a 296×128 px resolution supports four grayscale levels: white, light gray, dark gray, and black. The SSD1680 controller enables fast refresh times of approximately 1 second in monochrome mode and about 3 seconds in grayscale mode, providing a significant advantage over tri-color e-paper displays. The module includes external SRAM memory used as a frame buffer, reducing the RAM usage of the host microcontroller and enabling operation even with devices that have limited memory resources.
The board also features a microSD card slot for storing images and data to be displayed. The FeatherWing communicates via the SPI interface and uses several control lines, while additionally providing three optional user buttons. The module is delivered fully assembled, with socket headers that allow direct connection of a Feather board without soldering. Software support is available through Arduino and CircuitPython libraries.
Short product demonstration video.
Note!
The Feather board is not included in the kit and is required to operate and control the display. This product includes only the FeatherWing module and requires a compatible Feather base board for proper operation.
Features
- Module type: FeatherWing with e-paper display
- Display technology: eInk / ePaper
- Display size: 2.9"
- Resolution: 296 × 128 px
- Grayscale levels: 4
- Display driver: SSD1680
- Communication interface: SPI
- Frame buffer memory: external SRAM
- Memory card slot: microSD
- User buttons: 3
- Compatibility: Feather-standard boards
- Supported environments: Arduino, CircuitPython
- Power consumption: very low in static state
- Assembly state: fully assembled module
- PCB dimensions: 79.5 × 38 × 6.8 mm
- Weight: 22.0 g
1199905
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Pin expander designed for Feather plates. It is equipped with three sets of female strips and holes for prototyping. Adafruit 3417
zł47.29
24h
Available quantity: 2
Available
Module with monostable relay. It allows you to control high-power elements with a microcontroller. Adafruit 3191
zł49.73
24h
Available quantity: 1
Available
Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x\'s). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900MHz to the Internet or your mobile device. Adafruit 3230
zł53.91
24h
Available quantity: 1
Available
A module that allows you to create your own layout based on the Feather tile. Equipped with prototype holes and a set of screw connectors with pins out. Adafruit 2926
zł88.15
24h
Available quantity: 1
Available
The expansion module (shield) is designed for Feather nRF52840 boards. It enables easy connection of 16x32, 32x32 and 64x32 matrix displays. Requires self-assembly. Adafruit 4702
zł41.46
24h
Available quantity: 1
Available
RP2040 Feather ThinkInk - development board with RP2040 microcontroller and ePaper display connector
This compact development board allows direct connection to 24-pin e-paper displays, ideal for energy-efficient visual projects. Equipped with a 133MHz RP2040 microcontroller, 264KB SRAM, and 8MB Flash, it offers smooth display caching and support for a wide range of peripherals. It features a dedicated SPI display interface, a STEMMA QT connector, a Li-Po charger, USB-C, and a comprehensive GPIO set with PWM, ADC, and I2C, SPI, and UART communication. Adafruit 5727
zł88.26
24h
Available quantity: 2
Available
An expansion board for Feather boards, featuring a 1.3-inch 128x64 monochrome OLED display and three user buttons. The board comes fully assembled and communicates via I2C, allowing for easy connection to other STEMMA QT devices. The SH1107 display provides high contrast with low power consumption, and a built-in reset button allows for quick system restarts. Adafruit 6313
zł80.45
24h
Available quantity: 2
Available
This expansion board is designed for light and sound, cosplay, and interactive prop projects. It features a ready-made NeoPixel port with a level converter, 3W RGB LED drivers, and a Class D audio amplifier for driving 8Ω or 4Ω speakers. The built-in LIS3DH accelerometer allows for motion, impact, and tilt detection, ideal for dynamic effects. It works with a wide range of Feather boards, allowing you to quickly create advanced projects in a compact format. Adafruit 3988
zł50.18
24h
Available quantity: 2
Available
An extension that allows you to connect classic 3.5" and 5.25" floppy drives to Feather boards, allowing you to read and write data using the original interface. A built-in logic level converter ensures safe operation with 5V devices, and compatibility with the Feather M4 and RP2040 ensures adequate performance when streaming data. Adafruit 5679
zł24.97
24h
Available quantity: 4
Available
Extension module dedicated to matrix displays with HUB75 interface. Designed for Feather RP2040, M0 and M4 series tiles. Adafruit 3036
zł41.30
24h
Available quantity: 3
Available
Module with 3-axis accelerometer ADXL343 and precise temperature sensor ADT7410 dedicated to Feather series boards. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4147
zł62.29
24h
Available quantity: 2
Available
FeatherWing Doubler is a shield that allows you to create your own layout based on two or one Feather series. The plate has 256 holes, including designated, common solder points for supply voltages. Adafruit 2890
zł42.83
24h
Available quantity: 1
Available
The Qwiic connector overlay provides an easy-to-install way to add Qwiic connectors to Thing Plus and Feather boards. Communication takes place via the I2C interface. Sparkfun DEV-16790
zł26.64
24h
Available quantity: 2
Available
Data logger dedicated to Feather plates. Equipped with RTC clock, battery slot and micro SD card slot. Adafruit 2922
zł47.17
24h
Available quantity: 1
Available
A versatile extension for Adafruit Feather boards, allowing you to quickly connect Grove modules and Stemma QT accessories without soldering. The module offers three Grove A/D connectors, one UART, and two I2C connectors, making it easy to expand your project with a variety of sensors and interfaces. An additional Stemma QT port allows for further expansion of I2C devices. Adafruit 5862
zł24.97
24h
Available quantity: 4
Available
FeatherWing expansion module adding USB Host functionality to Feather boards via a USB-A connector, based on the MAX3421E controller with SPI communication and an integrated 5V 1A boost converter for powering USB devices. Adafruit 5858
zł72.16
24h
Available quantity: 3
Available
FeatherWing module with a 2.9" e-paper display featuring a 296×128 px resolution, supporting 4 grayscale levels and based on the SSD1680 driver, designed for Feather-standard boards. Adafruit 4777