Main view
search
  • Main view
  • PCB board view
  • PCB board angled view
  • Kit view
  • View from top
  • Angled view
ID: 1208286
zł41.24
Tax included

zł33.53 tax excl.

Graphic OLED display with a 0.96" diagonal and 128 × 64px resolution, featuring blue pixels and an SSD1306 controller. It communicates via I2C, while two Qwiic connectors allow connection to a compatible board without soldering. Designed for displaying text, icons, and measurement results. Soldered 333100

Delivery date unknown
Out-of-Stock

Description

The device OLED Display SSD1306 0.96" by Soldered features a 0.96" diagonal and a resolution of 128 × 64px. The monochrome screen displays text and graphics in blue on a dark background. Each active pixel emits its own light, so no additional backlight is required. The module can be used to display measurement results, messages, icons, and simple menus.

The display communicates with a microcontroller via the I2C interface, with a default address of 0x3C. Two Qwiic connectors, compatible with easyC and STEMMA QT, allow the module to be connected to a compatible controller board and additional devices to be added to the bus without soldering. The board also includes solder pads marked GND, VCC, SDA, and SCL for installing the included pin header.

Pinout of Soldered OLED SSD1306 0.96-inch display

In the factory configuration, the module requires a 5V supply via the VCC pin. The onboard voltage regulator reduces the voltage to 3.3V. The Qwiic connectors use 3.3V power and logic levels. Supplying 3.3V directly to the VCC pin requires the jumpers to be configured according to the manufacturer's documentation. Current consumption is approximately 20mA and depends on the number of active pixels.

The manufacturer provides an Arduino library with examples and a MicroPython module for controlling the display. The board measures 30 × 30mm and includes two mounting holes for M3 screws, allowing it to be installed in an enclosure.

Features

  • Display
    • Technology: OLED
    • Controller: SSD1306
    • Screen diagonal: 0.96"
    • Resolution: 128 × 64px
    • Display color: blue
    • Monochrome image
    • Self-emissive pixels with no additional backlight required
  • Communication and connectors
    • Interface: I2C
    • Default I2C address: 0x3C
    • Connectors: 2 × Qwiic, compatible with easyC and STEMMA QT
    • Solder pads for pin header installation: GND, VCC, SDA, SCL
  • Power supply
    • Supply voltage via the VCC pin in the factory configuration: 5V
    • Onboard 3.3V voltage regulator
    • Qwiic connector supply voltage and logic level: 3.3V
    • 3.3V supply via the VCC pin possible after changing the jumper configuration
    • Current consumption: approximately 20mA, depending on the number of active pixels
  • Software
    • Arduino library with examples provided by the manufacturer
    • MicroPython module for display control
  • Mechanical parameters
    • Board dimensions: 30 × 30mm
    • Two mounting holes for M3 screws

Kit includes

  • OLED SSD1306 0.96" display module, blue version
  • 4-pin header for soldering
1208286

Data sheet

Screen type
OLED
Diagonal (inch)
0,96
Resolution
128 x 64 px
Interface
I2C
Touch
No

You might also like

Other products in the same category (16)