Gravity: Analog Soil Moisture Sensor
ID: 581636
5906623406548
zł12.55
Tax included
zł10.20 tax excl.
Soil moisture sensor with analog output. The probe has two pointed tabs, making it easy to insert into the ground. It is supplied with the voltage of 3.3V or 5V. DFRobot SEN0114
Description
Soil moisture sensor with analog output. The measurement uses the change in conductivity of the hygroscopic probe material (resistance sensor). The probe has two pointed tabs, making it easy to insert into the ground. Thanks to the gold-plating of the measuring tip, the sensor has better measuring properties and is more resistant to oxidation than, for example, tinned probes. The analog output voltage level increases in proportion to the ground moisture level. The sensor is supplied with the voltage of 3.3 V or 5 V. It can be used, for example, in automatic watering systems. The Wiki page contains the manual and sample programs.
Features
- Output voltage: 0 to 4.2V
- Gold-plated probe
- Analog interface
- Gravity connector
- Power supply: 3.3V / 5V
- Current: 35mA
- Dimensions: 60 x 20 x 5 mm
Kit contains
- Module with soil moisture sensor
- Gravity cable
581636
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 57
Available
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.65
24h
Available quantity: 2
Available
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
zł89.20
Delivery date unknown
No product available!
Set of 10 cables, 30 cm long, for analog sensors compatible with the Gravity standard. DFRobot FIT0031
zł22.18
24h
Available quantity: 2
Available
Other products in the same category (16)
Sensor dedicated to the measurement of nitrogen content in the soil. Allows you to monitor and analyze the level of the element in the soil, and thus optimize fertilization and improve cultivation processes
zł271.58
4 weeks
No product available!
Waterproof soil moisture sensor with analog output. The probe has a pointed tip, which allows it to be easily inserted into the ground. It is supplied with the voltage from 3.3V to 5.5V. DFRobot SEN0308
zł64.11
4 weeks
No product available!
RS485 Multi-Depth Sensor for Soil Moisture, Temperature, and EC Measurement - Seeed Studio 101990982
Seeed Studio 101990982 is a professional RS485 soil sensor that enables simultaneous measurement of moisture, temperature, and electrical conductivity at four different depths. With its robust design and IP68 protection, it is suitable for long-term applications in agriculture, greenhouses, and environmental monitoring, providing reliable data for irrigation and crop optimization.
zł1,722.34
4 weeks
No product available!
Module with a soil moisture sensor for the M5Stack sets. It has an analog output and a digital output with adjustable reaction threshold. M5Stack U019
zł19.90
24h
Available quantity: 2
Available
Soil moisture sensor based on soil resistivity meansurement
zł12.28
24h
Available quantity: 6
Available
Capacitive soil moisture sensor with pump for M5Stack sets, equipped with holes compatible with LEGO. M5Stack U101
zł69.25
24h
Available quantity: 1
Available
Resistive soil moisture sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020008
zł17.71
24h
Available quantity: 1
Available
A robust sensor for approximate measurement of nitrogen, phosphorus and potassium (NPK) levels in soil, ideal for precision farming and field applications. With a rugged design (IP68), RS485 MODBUS-RTU communication and a wide power supply range, it allows easy integration with Arduino-type systems and operation in harsh environmental conditions. DFRobot SEN0605
zł391.84
24h
Available quantity: 1
Available
Soil moisture sensor with analog output. It has a probe with pointed tips, which allows you to easily place it in the ground. The analog output voltage level increases in proportion to the humidity level
zł6.70
24h
Available quantity: 6
Available
Earth humidity sensor with analogue output, supplied with 3.3 to 5.5 V voltage with Gravity connector. DFRobot SEN0193
zł27.53
24h
Available quantity: 3
Available
The FC-28 sensor is used in automatic irrigation systems, IoT projects, and educational experiments involving soil moisture measurement. It enables accurate monitoring of crop conditions and optimizes water consumption
zł2.90
24h
Available quantity: 50
Available
Soil moisture sensor with I2C interface. The probe has two pointed tabs, making it easy to insert into the ground. The sensor is supplied with the voltage of 3.3 V or 5 V. SparkFun SEN-17731
zł104.43
24h
Available quantity: 1
Available
Soil moisture sensor with analog output. The module comes with a probe with metal tips.
zł17.01
4 weeks
No product available!
Capacitive soil humidity sensor with I2C interface powered by 3-5V. Adafruit 4026
zł39.31
24h
Available quantity: 7
Available
A moisture sensor specially adapted to work with the Kitronik Greenhouse Kit for the BBC micro:bit. It allows monitoring of moisture in the soil. It can be programmed using any editor for the micro:bit. Kitronik 56107
zł11.89
24h
Available quantity: 2
Available
Soil moisture sensor with analogue output. It has a shape resembling a fork, which makes it easy to put it in the ground. The voltage level of the analog output increases in proportion to the ground moisture level. The sensor can be used in an automatic watering system. Version with a 3.5 mm ARK connector. SEN-13637
zł47.42
24h
Available quantity: 2
Available
Soil moisture sensor with analog output. The probe has two pointed tabs, making it easy to insert into the ground. It is supplied with the voltage of 3.3V or 5V. DFRobot SEN0114