Qwiic Micro Magnetometer - module with 3-axis MMC5983MA megnetometer
ID: 1181125
5906623419357
zł86.80
Tax included
zł70.57 tax excl.
Module with a 3-axis MMC5983MA mega-meter. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-19921
Description
Module with a 3-axis MMC5983MA mega-meter. It can detect up to 0.4mG ensuring ±0.5° heading accuracy. The sensor has a built-in demagnetization circuit to remove any residual magnetization. The 1000 Hz output frequency, ± 8G FSR and 18-bit resolution make the MMC5983MA an excellent sensor for electronic compass applications. It is powered with the voltage of 3.3 V, and communication is via the I2C interface (Qwiic connector). Full documentation and examples of use are available on the product page.
Features
- Fully integrated 3-axis magnetic sensor
- Dynamic range and accuracy:
- ± 8G FSR
- 18 bit resolution
- 0.4 mG RMS total noise
- Heading accuracy ± 0.5º
- Maximum frequency of measurements 1000 Hz
- Sensitivity Compensation
- Built-in temperature sensor
- I2C address: 0x30
- Qwiic connector
- Supply voltage from 2.8 V to 3.6 V
1181125
Data sheet
- Interface
- I2C
- Type of sensor
- MMC5983MA
- Power supply voltage
- 2,8 - 3,6 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.35
24h
Available quantity: 17
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.56
24h
Available quantity: 22
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.96
24h
Available quantity: 9
Available
Other products in the same category (16)
HMC5883L digital electronic compass 3-axis magnetoresistive sensor module with level converter, RoHS
zł12.87
24h
Available quantity: 2
Available
Module with 3-axis magnetometer MAG3110, I2C, RoHS
zł54.58
24h
Available quantity: 3
Available
A module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C interface. DFRobot SEN0529
zł40.47
4 weeks
No product available!
The Zeenko near-field probe set based on a 4-layer PCB enables precise detection of EMI sources in electronic circuits. When used with spectrum analyzers such as tinySA ULTRA, it provides effective electromagnetic diagnostics without the need for external amplifiers. An ideal solution for analyzing and eliminating interference in electronic systems.
zł45.21
24h
Available quantity: 8
Available
Module with a 3-axis magnetic field sensor LIS3MDL. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4479
zł50.17
24h
Available quantity: 2
Available
Module with 3-axis digital compass, HMC5983, I2C, SPI, RoHS
zł69.90
24h
Available quantity: 1
Available
Complete kit for building a gradiometer, including two FG-3+ magnetometer sensors, a PCB board, Android-enabled software, and a mobile app. The kit allows for easy assembly and quick start-up of the device, which will immediately start displaying readings on the LCD after connection. Additional accessories, such as sensor holders, sensor tuning pipes, and a housing, provide convenience, safety, and precise adjustment of the device to use. SparkFun WIG-25530
zł1,992.69
3 weeks
No product available!
Module with a 3-axis magnetometer BMM150. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020492
zł53.46
4 weeks
No product available!
A module with a magnet sensor that allows you to detect the presence of an object emitting a magnetic field in the environment. The module is supplied with the voltage ranging from 3.3 V to 5 V and has a digital output. DFrobot DFR0033
zł13.74
24h
Available quantity: 1
Available
Precise 3-axis compass based on FlipCore and TMR technology, offering magnetic field measurement in the range of ±2000μT without the need for calibration. With I3C support, sampling rate up to 400 Hz and Field Shock Recovery function, it is perfect for navigation systems, AR/VR, drones and autonomous vehicles. DFRobot SEN0619
zł41.51
24h
Available quantity: 4
Available
Module with a 3-axis magnetometer based on the BMM150 system. It communicates via the I2C or SPI interface. DFRobot SEN0419
zł30.52
24h
Available quantity: 2
Available
KAmodMAG3110FC is a module with magnetic field sensor MAG3110FC from NXP. The sensor measures the magnetic field in the range of ±1000μT, with a resolution of 0.1μT. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMAG3110FC
zł24.90
24h
Available quantity: 335
Available
Module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C or SPI interface. Waveshare BMM150 3-Axis Magnetometer Sensor
zł29.56
24h
Available quantity: 2
Available
Module with a 3-axis magnetometer based on the MLX90393 system. It has a measuring range from ± 5mT to ± 50mT and a resolution of 0.161 µT. The I2C or SPI interface is used for communication. Adafruit 4022
zł54.75
24h
Available quantity: 1
Available
Precise Hall effect sensor that converts magnetic field intensity into analog voltage. Differential response to magnetic poles (voltage increases when approaching S pole and decreases at N pole) enables precise analysis of field direction and strength. High sensitivity, low noise and compatibility with platforms such as Arduino and micro:bit make the sensor ideal for industrial, educational and hobby applications. DFRobot DFR1132
zł11.71
4 weeks
No product available!
No product available!
Module with a 3-axis MMC5983MA mega-meter. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-19921