Benchtop Power Board - power adapter with ATX connector

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

Power filter board dedicated to Raspberry Pi minicomputers and DAC audio modules. It integrates various types of capacitors and allows you to remove power noise. DFRobot DFR0940.

An efficient step-down converter that steps down the input voltage from as low as 45 V to a regulated output voltage range of 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.4 A. It has built-in reverse polarity, overload and short circuit protection, and the spread spectrum function reduces EMI interference. Pololu 4873

Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793

Step-Down converter D36V50F3 with an output voltage of 3.3 V, an input voltage from 4.5 to 50 V and a maximum output current of 9.5 A. Pololu 4090

150 W Step-Up converter with an output voltage of 15to 35 V, an input voltage of 10 to 32 V and a maximum current of up to 6 A

The Step-Down converter module on the MP1584EN chip converts the input voltage 9-35V to output voltage 5V with a maximum current of 5A and a power of 25W. It operates in temperatures from -20°C to 75°C and has a compact size of 45 x 31 x 16 mm

BMS protection circuit designed for 7 Li-Ion cells. It has a charging function with balancer option, a discharging function and an over-discharge protection function. HXYP-C47-MA18-7S

DC-DC Step-Up/Step-Down Converter Module. It has an input voltage of 1.4 to 16 V, an output voltage of 5 V and a maximum output current of 1 A to 1.5 A. Pololu 4965

Step-Up/Step-Down converter module based on the S13V20F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 2,5 A. Pololu 4085

A passive on/off power switch that provides control and feedback functions, allowing you to start and safely shut down your system with short presses of the button, while a long press forces the power off. The Mk2 version, based on the 74LVC1G175 D-type flip-flop digital design, eliminates the problems of component tolerance and temperature variation, and also offers additional improvements such as a 2A self-resetting fuse, LED indicators, and the ability to connect a larger external button. SparkFun SPX-25365

DC-AC converter, also referred to as an inverter. Converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 220 V

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 3.3 V and a maximum input of up to 2 A. Pololu 4940

The LM317 + LM337 Symmetrical Power Supply provides stable and smoothly regulated symmetrical voltage for electronic and laboratory applications. Suitable for powering audio systems, preamplifiers and test projects where stable, regulated symmetrical voltage is essential. Requires consideration of proper cooling to maintain optimal operating conditions

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 12V. PDC004

Step-Down converter module with an input voltage of up to 5.5 V, an output voltage of 3.3 V and an output current of 1.2 A (2 A instantaneous current). Adafruit 4711