![A-Cute Car Robotic Kit - 3-kołowe podwozie ze sterownikiem FPGA A-Cute Car Robotic Kit - 3-kołowe podwozie ze sterownikiem FPGA](https://kamami.pl/27709-large_default/a-cute-car-robotic-kit-fpga-based-three-wheeled-robotic-car-kit.jpg)
![A-Cute Car Robotic Kit - 3-kołowe podwozie ze sterownikiem FPGA A-Cute Car Robotic Kit - 3-kołowe podwozie ze sterownikiem FPGA](https://kamami.pl/27709-large_default/a-cute-car-robotic-kit-fpga-based-three-wheeled-robotic-car-kit.jpg)
zł1,374.79 tax excl.
The A-Cute Car is an FPGA-based three-wheeled robotic car kit. This car can provide higher operation performance than the MCU based robotic car, because the FPGA provides more powerful computing power than the MCU. P0467
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The A-Cute Car is an FPGA-based three-wheeled robotic car kit. This car can provide higher operation performance than the MCU based robotic car, because the FPGA provides more powerful computing power than the MCU.
The car is driven by two DC motors. It can move in any direction, by changing the speed and direction of each wheel by changing the speed and direction of the two DC motors. The car is equipped with a sensor board which contains seven line tracking sensors by implementing the line following function. The car also contains a power convert system so the car can be driven by 3.3V~12V battery pack. The car contains an IR receiver so that the car can be remotely controlled with the IR controller included in the car kit. Buzzers and lamps are equipped just for fun.
The car contains a 2x20 GPIO expansion header and a 2x6 TMD expansion header. The 2x6 TMD expansion header can be expanded with the Terasic Bluetooth module BTS-TMD, so the car can be remotely controlled with a Bluetooth device, e.g. Android Cell Phone. Besides the hardware, the car kit also includes open source examples. Based on the example codes, developers can quickly implement their application designs.
Kit content:
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 7.4 V, and has a current consumption of 1 A per coil. Pololu 1472
No product available!
Metal Worm Gear Motor, 100 RPM Rotation Speed, 12V Working Voltage. JGY370-32
No product available!
Motor with 20 mm diameter and 46 mm length, 488:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 30 RPM speed and 21 kg*cm maximum torque. Pololu 3723
No product available!
Miniature, analog servomechanism with dimensions 20.0mm × 8.3mm × 17.3mm and weight 4.4g, power supply 4.8 ... 6V, maximum torque 0.6kg / cm (with 6V power supply). Pololu 3420
Off-road Dagu Wild Thumper 4WD chassis in silver, complete with wheels with a diameter of 120 mm and motors with a 34:1 gearbox. The chassis is made of aluminum sheet, holes with a diameter of 4 mm spaced every 10 mm allow the installation of the controller and accessories. Pololu 1564
No product available!
Minisumo robot on a tracked chassis with Pololu motors with a 50:1 HP gearbox. The robot is fully assembled and requires four additional AA batteries. Pololu 5011
No product available!
2WD robot chassis made of plexiglass with a set of assembly elements (screws, bushes, nuts). The set includes motors, 65 mm wheels, support wheels and a battery pack
Motor with 25 mm diameter and 52 mm length, 47:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 210 RPM speed and 12 maximum torque. Pololu 3205
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.3 V, and consumes up to 0.8 A per coil. Pololu 2256
No product available!
A small, powerful motor with a 250: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 130 RPM, maximum torque of 3 kg * cm and carbon brushes with increased durability. Pololu 3044
No product available!
Kit for building a robot based on the Raspberry Pi. Includes landing gear, camera and power supply. Waveshare AlphaBot-Pi Acce Pack
No product available!
Motor with 20 mm diameter and 46 mm length, 488:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 30 RPM speed and 21 kg*cm maximum torque. Pololu 3473
No product available!
Compact and complete robot controller, containing the ATmega328P AVR microcontroller (with 32 KB of Flash memory and 2 KB of RAM memory) and a two-channel DC motor driver. Pololu 1220
Motor with 20 mm diameter and 41 mm length, 31:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 450 RPM speed and 2 kg*cm maximum torque. Pololu 3463
No product available!
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441
No product available!
The A-Cute Car is an FPGA-based three-wheeled robotic car kit. This car can provide higher operation performance than the MCU based robotic car, because the FPGA provides more powerful computing power than the MCU. P0467