Hantek PP-150B measurement probe 100MHz 600V
ID: 1190007
5906623486496
zł29.00
Tax included
zł23.58 tax excl.
Professional oscilloscope probe, ideal for precise signal measurements. Hantek PP-150B
Description
The Hantek PP-150B is a passive voltage probe designed for precise measurements using digital and analog oscilloscopes. The probe features an ergonomic, portable design, and its housing is made using injection molding technology, which provides greater durability and flexibility during use. The Hantek PP-150B offers a choice of 1× or 10× attenuation, which allows for adjustment to various measurement ranges. The product meets European safety standards, having a CE certificate. It is compatible with a wide range of oscilloscopes in the medium and low frequency range, making it an ideal choice for both professional and amateur use.
Features
- Damping Factor: 1× and 10×
- Input Resistance: 1MΩ (at 1×), 10MΩ (at 10×)
- Input Capacitance: 85pF-115pF (at 1×), 18.5pF-22.5pF (at 10×)
- Bandwidth: DC-6MHz (at 1×), DC-100MHz (at 10×)
- Input Voltage: <200V DC + peak AC (at 1×), <600V DC + peak AC (at 10×)
- Cable Length: 120 cm
- Temperature Range: Operation: -10℃ to +50℃, Storage: -20℃ to +75℃
- Humidity: ≤85% (relative humidity)
- Weight: 55g
1190007
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.8mm
zł47.92
24h
Available quantity: 10
Available
LCRkelvin is a four-wire Kelvin probe for precise measurement of RLC components with minimal wire resistance impact. Equipped with gold-plated Kelvin clips, it ensures accuracy and reliability, and its design is compatible with LCR meters from various brands, such as Hantek and Uni-T
zł141.61
24h
Available quantity: 2
Available
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP702
zł1,507.08
24h
Available quantity: 2
Available
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP3000XS
zł4,551.00
4 weeks
No product available!
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 50 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8050
zł938.99
4 weeks
No product available!
Test probe tip with 20X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP20-1G
zł6,599.00
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a 300 MHz frequency band and the ability to measure voltages up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP703
zł4,059.00
4 weeks
No product available!
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 50 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP503B
zł3,431.45
4 weeks
No product available!
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 100 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8100
zł1,349.01
24h
Available quantity: 1
Available
A probe tip with attenuation factor of 200X. Dedicated to Micsig probes from the SigOFIT series operating in the frequency band of 100MHz, 200MHz and 350MHz. Micsig OP200-3
zł1,398.90
4 weeks
No product available!
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł133.54
24h
Available quantity: 10
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 150 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3001
zł1,499.04
24h
Available quantity: 1
Available
Oscilloscope probe designed to analyze signals generated by the ignition coil in car engines. It is compatible with most digital oscilloscopes. Hantek HT25COP
zł440.00
24h
Available quantity: 4
Available
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP1000-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,600.76
Delivery date unknown
No product available!
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP1000-5
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł4,598.99
Delivery date unknown
No product available!
The PP80B oscilloscope probe is a reliable tool for precise measurements, compatible with digital and analog oscilloscopes, offering a bandwidth of up to 80 MHz and the ability to select the attenuation factor. Hantek PP-80B
zł23.52
24h
Available quantity: 12
Available
Professional oscilloscope probe, ideal for precise signal measurements. Hantek PP-150B