Educational kit for learning TinyML. It consists of the Wio Terminal module, Grove sensors and a course developed by Professor Vijay Reddi from Harvard University. Dedicated to people who want to learn the basics of machine learning.
Wio Terminal is an ATSAMD51 based development kit with wireless connectivity supported by Realtek RTL8720DN. The processor runs at 120 MHz (up to 200 MHz) and has 4 MB of Flash memory. The Realtek RTL8720DN chip supports both Bluetooth and Wi-Fi, providing communication for IoT projects. Wio Terminal is equipped with a 2.4-inch LCD screen, built-in IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared transmitter (IR 940nm). In addition, it also has two multifunctional Grove ports and a 40-pin GPIO connector compatible with the Raspberry Pi.
Grove is a modular, easy-to-use, open source toolkit. The two Grove sensors included in the kit are an ultrasonic sensor and a temperature and humidity sensor.
Thanks to the kit, the user can gain practical experience and learn about machine learning algorithms, including data collection, preprocessing, model learning, optimization and implementation in a ready project.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
3-port I2C splitter module. The board is equipped with Grove connectors and allows you to connect additional I2C devices. Seeed Studio 103020006
No product available!
Development kit based on ATSAMD51 with WiFi and BLE 5.0. It is equipped with a 2.4-inch LCD screen, IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared transmitter (IR 940nm). Seeed Studio 102991299
Power supply module with a 650 mAh battery for the Wio Terminal set. Seeed Studio 103990564
LoRaWan and LongFi network monitor. It allows you to specify the number of hotspots to extend the actual network coverage. Seeed Studio 114992777
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, communication interfaces and RGB diode. Adafruit 3382
The Wio Helium Monitor is a plug-and-play LongFi hotspot monitor for the Helium network. It allows you to determine whether a device is connected to the local area network (LAN) and whether it has access to the Internet. With Grove-Wio-E5 and an activated Watchium Silver/Gold subscription, you can also check that LoRaWAN communication with the hotspot (including Witness) is working correctly. Seeed Studio 114992990
Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3010
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857
The board is equipped with ATSAME51 microcontroller (ARM Cortex-M core) with CAN bus and SPI Flash memory, GPIO pins and a connector for connecting the battery with the charging circuit. Adafruit 4759
Board with SAMD21 microcontroller with CortexM0 + core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Module with headers. Arduino ABX00032
Development kit based on ATSAMD51 with WiFi and BLE 5.0. It is equipped with a 2.4-inch LCD screen, IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared transmitter (IR 940nm). Seeed Studio 102991299
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3505
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
No product available!
Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600
Development kit with ATSAMD21G18 microcontroller and USB connector. It provides two Qwiic connectors and a programmable WS2812 LED. Perfect solution for people who want to quickly and easily connect a Qwiic device to a computer. SparkFun SPX-24639
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
Educational kit for learning TinyML. It consists of the Wio Terminal module, Grove sensors and the course. Seeed Studio 114992774