New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
Wio Terminal - development kit with ATSAMD51 microcontroller, WiFi and BLE 5.0
ID: 583286
5906623415670
zł193.97
Tax included
zł157.70 tax excl.
Development kit based on ATSAMD51 with WiFi and BLE 5.0. It is equipped with a 2.4-inch LCD screen, IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared transmitter (IR 940nm). Seeed Studio 102991299
Description
Wio Terminal is an ATSAMD51 based development kit with wireless connectivity supported by Realtek RTL8720DN. The processor runs at 120 MHz (up to 200 MHz) and has 4 MB of Flash memory. The Realtek RTL8720DN chip supports both Bluetooth and Wi-Fi, providing communication for IoT projects. Wio Terminal is equipped with a 2.4-inch LCD screen, built-in IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared transmitter (IR 940nm). In addition, it also has two multifunctional Grove ports and a 40-pin GPIO connector compatible with the Raspberry Pi.
Wio Terminal can work with Grove modules to create IoT systems, and can be connected to the Raspberry Pi, creating a computer system. It will be used in a wide range of projects, including as GPS navigation, weather monitoring station, wireless controller or machine learning module. The kit can be programmed with most popular tools: Arduino IDE, MicroPython, ArduPy, Visual Studio Code or CircuitPython. Full documentation of the module with sample projects is available on the product page.
Features
- Highly Integrated Design
- MCU, LCD, WIFI, BT, IMU, Microphone, Speaker, microSD Card, Light Sensor, 5-Way Switch, Infrared Emitter (IR 940nm), Crypto-authentication Ready
- Powered by Microchip ATSAMD51P19
- ARM Cortex-M4F core running at 120MHz(Boost up to 200MHz)
- 4 MB External Flash, 192 KB RAM
- Comprehensive Protocol Support
- SPI, I2C, I2S, ADC, DAC, PWM, UART(Serial)
- Powerful Wireless Connectivity
- Powered by Realtek RTL8720DN
- Dual Band 2.4Ghz / 5Ghz Wi-Fi (802.11 a/b/g/n)
- BLE / BLE 5.0
- USB OTG SupportGrove Ecosystem
- USB Host
- USB Client
- Software Support
- Arduino
- MicroPython
- ArduPy
- AT Firmware
Kit contains
- Wio Terminal
- USB typ C cable
- User Manual
583286
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
3-port I2C splitter module. The board is equipped with Grove connectors and allows you to connect additional I2C devices. Seeed Studio 103020006
zł15.85
24h
Available quantity: 4
Available
Module with an EMG signal detector. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020058
zł149.04
24h
Available quantity: 2
Available
Power supply module with a 650 mAh battery for the Wio Terminal set. Seeed Studio 103990564
zł124.55
24h
Available quantity: 1
Available
The SanDisk Ultra microSDHC 32 GB 120MB/s C10 memory card is an efficient and reliable high-capacity storage medium, offering fast data transfer, compatibility with various devices and resistance to difficult conditions, ideal for smartphones, tablets, sports cameras and drones
zł34.32
24h
Available quantity: 10
Available
SanDisk Extreme microSDHC 32GB V30 memory card with adapter. Designed for intensive use in difficult conditions, ideal for video monitoring, drones, sports cameras, professional cameras and telemetry systems, offering fast data recording up to 30 MB/s. SanDisk Extreme SDSQXAF-032G-GN6AA
zł51.91
24h
Available quantity: 4
Available
Other products in the same category (16)
Educational kit for learning TinyML. It consists of the Wio Terminal module, Grove sensors and the course. Seeed Studio 114992774
zł372.85
24h
Available quantity: 1
Available
Development board equipped with ATSAMD21G18 microcontroller. It has 30 I/O lines, including SERCOM interfaces and 14 analog inputs. Compatible with Arduino. SparkFun DEV-13672
zł164.38
24h
Available quantity: 2
Available
LoRaWan and LongFi network monitor. It allows you to specify the number of hotspots to extend the actual network coverage. Seeed Studio 114992777
zł585.41
24h
Available quantity: 1
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3505
zł141.63
24h
Available quantity: 1
Available
Adafruit EdgeBadge is a board compatible with the TensorFlow Lite machine learning platform, allowing, among others, for speech recognition. The platform is based on the ATSAMD51J19 microcontroller. Adafruit 4400
zł235.13
4 weeks
No product available!
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 1
Available
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 22 I/O lines, 12 PWM channels, micro-USB. The module has a built-in SD connector with dedicated SPI (SPI1) interfaces that allow you to play music files. Arduino MKR Zero ABX00012
zł159.00
3 weeks
No product available!
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05
24h
Available quantity: 1
Available
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857
zł90.28
24h
Available quantity: 2
Available
The board is equipped with the ATSAMD51J19 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins, connector for connecting the battery with the charging circuit. Adafruit 3857
zł119.31
24h
Available quantity: 1
Available
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, communication interfaces and RGB diode. Adafruit 3382
zł170.13
24h
Available quantity: 1
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3727
zł64.96
4 weeks
No product available!
Board with SAMD21 microcontroller with Cortex M0+ core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Arduino ABX00027
zł129.00
24h
Available quantity: 12
Available
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3061
zł206.07
4 weeks
No product available!
Board with SAMD21 microcontroller with CortexM0 + core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Module with headers. Arduino ABX00032
zł139.00
24h
Available quantity: 10
Available
Development kit with ATSAMD21E microcontroller with ARM Cortex M0+ core. The chip can be clocked at 48 MHz, has a built-in 256 KB of Flash memory and 32 KB of SRAM. The module has a Qwiic connector. SparkFun DEV-15423
zł110.56
24h
Available quantity: 1
Available
Development kit based on ATSAMD51 with WiFi and BLE 5.0. It is equipped with a 2.4-inch LCD screen, IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared transmitter (IR 940nm). Seeed Studio 102991299