Category: STARTER KITS, PROGRAMMERS, MODULES

DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver. DFRobot DFR0399

Dreamer Nano V4 - Arduino Leonardo compatible; ATmega 32U4

A set with a measuring module and a probe for measuring the pH of the solution. It is supplied with the voltage of 3.3 to 5.5 V. It has an analog Gravity output interface. DFRobot SEN0161-V2

Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M

Starter kit with MKE16Z64VLF4 microcontroller. The board has an RGB LED, a 6-axis IMU sensor (accelerometer and magnetometer), a 3-axis digital gyroscope, an ambient temperature sensor, a CAN interface and a capacitive touch panel. NXP FRDM-KE16Z

ESP32-S3-LCD-2-C is an integrated development board with a 2" display and an included OV5640 camera, combining display, wireless connectivity, and video acquisition functions in a single module. Thanks to support for an accelerometer, TF card slot, USB-C power supply, and extensive GPIO interfaces, the board is suitable for applications such as portable monitoring systems, image recording, and interactive IoT projects.

Module with 2-element 14-segment display with red backlight. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104020132

Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775

Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575

An evaluation kit dedicated to Internet of Things (IoT) applications that supports Wi-Fi, Sub-GHz 868 MHz, Bluetooth and NFC communication protocols. STMicroelectronics STEVAL-IDI004V2

A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has a microSD slot and an Ethernet chip. Version with access to secure software updates. PJRC TEENSY41-LOCK

An extension that allows you to connect classic 3.5" and 5.25" floppy drives to Feather boards, allowing you to read and write data using the original interface. A built-in logic level converter ensures safe operation with 5V devices, and compatibility with the Feather M4 and RP2040 ensures adequate performance when streaming data. Adafruit 5679

STM32 Nucleo-32 development board with STM32F042K6T6 MCU, supports Arduino connectivity

Blue mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070026

A kit consisting of STM32 NUCLEO-F401RE board with STM32F401RE microcontroller and X-NUCLEO-53L4A1 board with VL53L3CD ToF distance sensor. STMicroelectronics P-NUCLEO-53L4A1

The X-NUCLEO-IHM03A1 plate allows the control of a high-power stepper motor; the maximum current of the phase is 10A rms, additionally the controller enables execution up to 1/128 step and has a number of protections. X-NUCLEO-IHM03A1

P-NUCLEO-IOD02A1 is an STM32 Nucleo kit consisting of NUCLEO-L452RE (IO-Link stack), X-NUCLEO-IOD02A1 (IO-Link physical layer) and X-NUCLEO-IKS02A1 (sensor module). The kit constitutes a full IO-Link device. P-NUCLEO-IOD02A1

Sensor for detecting the distance, intensity and frequency of light (lightning) within a radius of 40 km. The module enables weather enthusiasts to measure data about local storms. DFRobot SEN0290

Module with a temperature and humidity sensor based on the HTU31 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4832

Module with waterproof barometer LPS33HW. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4414