Akyga AK-PC-13A is a meter adapter that converts the IEC C14 connector into a CEE 7/4 socket, enabling the connection of devices with a Schuko plug to an uninterruptible power supply with C13 sockets. Akyga AK-PC-13A

Akyga AK-OT-05A is a 1.5-meter power cable prepared for quick replacement with Europlug CEE 7/16. Thanks to the special solder, installation is easy, which allows you to quickly replace a damaged cable in everyday devices. Akyga AK-OT-05A

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals and a 240 Vrms jumper. Pololu 5412

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals. Pololu 5411

Akyga AK-USB-04 is a 1.8-meter USB 2.0 cable that allows you to connect devices with USB A and USB B ports. It is mainly used for data transmission between peripheral devices, such as printers or scanners, and a computer or laptop. Akyga AK-USB-04

The GP2Y0A41SK0F sensor performs precise distance measurement in the range of 4–30 cm with an analog output signal adapted for operation with microcontrollers. It is used in robotics projects, obstacle avoidance systems, and automation devices detecting the presence of objects.

32-bit ARM Cortex-M3, 512 kB Flash, 96 kB SRAM, 4 kB EEPROM, USB Device/Host/OTG, 5xUART, Ethernet, LCD, EMC, TFBGA180, NXP, RoHS

Compact and versatile microSD, microSDHC, microSDXC, SD, SDHC, SDXC and T-Flash card reader. It offers wide compatibility with Windows, MacOS and Linux, supporting many types of SD and TF memory cards with a capacity of up to 2 TB. NATEC SCARAB 2

ARM Cortex-M0+ CPU, Low power, 64kB Flash, 8kB RAM, USB, 2xUSART, 2xI2C, 2xSPI, ADC, STM, LQFP64, RoHS

Compact controller with XIAO ESP32-C3 module, enabling precise control of ST/SC servos via UART interface. Thanks to its solid construction and 5-12 V power supply, it allows simultaneous control of multiple servos, which is suitable for humanoid robots, hexapods and robotic arms. Arduino IDE support, open architecture and easy assembly make it a great tool for education, prototyping and advanced robotic projects. Seeed Studio 114993612

A circular board for the BBC micro:bit with 24 addressable ZIP LEDs, offering a full color spectrum and allowing for the creation of eye-catching lighting animations. Mounts directly to the micro:bit using screws, and additional pins allow for the connection of sensors or additional LEDs. Power is supplied via a JST socket or solder pads, and the built-in regulator also powers the micro:bit. The ZIP Halo is fully compatible with NeoPixel libraries and can be programmed in MakeCode or MicroPython. Kitronik 5625

The 0.2 m long adapter allows you to connect devices with DisplayPort output to monitors or projectors with HDMI input, providing a high-resolution video signal. Gold-plated plugs guarantee durability and better transmission quality, and the Plug & Play function eliminates the need to install additional drivers

The DS1307 RTC Module is a real-time clock module and a CR1220 battery backup battery. Communicates via the I2C interface. DFRobot DFR0386

An expansion board for the BBC micro:bit, allowing easy connection and control of low-power servos. It supports two servos by default, and up to three by disabling the built-in ZIP LEDs. Powered by three AAA batteries, it simultaneously supplies power to the micro:bit, while a power switch protects against unnecessary discharge. With five RGB ZIP LEDs and the ability to connect additional ones, the board allows for attractive lighting effects and is ideal for robotic projects like the :MOVE mini. Kitronik 5623

The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards

The official “night vision” camera board released by the Raspberry Pi Foundation. High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also support 1080p30, 720p60, and 640x480p60/90 video.

Laser ToF distance sensor based on the VL53L1X, providing distance measurements up to 4 m at a ranging frequency of up to 50 Hz. Equipped with a Class 1 940 nm infrared emitter and SPAD receiver, it communicates via the I2C interface. The module operates from a 3.3 V to 5 V supply and comes with a pre-installed 200 mm GH4P cable. Designed for use with the Pixhawk 4 flight controller. Holybro ST VL53L1X Lidar

Round TFT display with a diagonal of 4" and a resolution of 720x720 pixels. Uses the NV3052C controller. For control, it requires a system with high computing power and an appropriate amount of memory. Adafruit 5793