Category: Electronic modules

A module with EEPROM memory with a capacity of 256Kbit (32kB) with the AT24C256 chip in the SMD version. It communicates via the I2C interface

CP2102 USB to UART Module, USB micro connector

Powerbank module with a basket for two 18650 batteries. It can supply 3 V and 1 A or 5 V and 2 A

5-button keyboard module with analog output

ArduCam CSI to HDMI modules are designed to work with cameras: Raspberry Pi V1 and Raspberry Camera V2. ArduCAM CSI to HDMI allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters). Arducam B0091

BMS module for six Li-Ion cells with a voltage of 22.2 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 14 A

PMS7003 is a kind of digital and universal particle concentration sensor, which can be used to obtain the number of suspended particles in the air, i.e. the concentration of particles, and output them in the form of digital interface

LC filter connected to the output of the DC power supply with a voltage from 0 to 50 V and a maximum current of 2 A. It reduces voltage ripple and interference caused by the power supply

The TPA3116DA 150W XH-M544 audio amplifier module is a compact device with a wide input voltage range (12-26V) and output power up to 150W (100W recommended), ensuring clear sound with a signal-to-noise ratio of 100dB. The small size (77 x 73 x 19mm) makes it an ideal choice for a variety of audio projects.

USB - UART converter based on the PL2303 chip. Compatible with voltages of 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a USB type C connector. Waveshare PL2303 USB UART Board (Type C)

The module allows to measure the occurrence and strength of precipitation (rain), has an LM393 system and an adjustable threshold for the digital output.

Stereo audio amplifier based on the TDA7492 chip. It can be powered with the voltage from 10 to 26 V and has two outputs with a power of 50 W

Module with eight 240V/2A relays controlled by 5V with a fuse triggered by a low state. modSSR-8CH-L

Adapter with HDMI socket to DVI plug 24+5.

Module with Flash memory W25Q16 with a capacity of 16 Mbit (2 MB). It communicates via the SPI interface. Adafruit 5635

Stereo audio amplifier with Bluetooth 5.0 communication. It can be powered with the voltage from 5 to 24 V and has two outputs with a power of 100 W. ZK-1002L

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and a USB type A output. It enables powering devices with 9 V or 12 V and testing chargers. PDC005

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, has been equipped with a USB type C connector. Waveshare FT232 USB UART Board (Type C)

The module with the DRV8830 DC motor controller with a maximum current of 1 A. The board is equipped with a screw connector and communicates via the I2C interface. Pimoroni PIM479

Module with a TL281 4-channel optocoupler with a maximum collector-emitter voltage of 80 V